kgdb
--- diff/MAINTAINERS 2004-10-04 15:13:03.000000000 +0100
+++ source/MAINTAINERS 2004-10-04 22:35:19.000000000 +0100
@@ -1242,6 +1242,12 @@
W: http://developer.osdl.org/rddunlap/kj-patches/
S: Maintained
+KGDB FOR I386 PLATFORM
+P: George Anzinger
+M: george@mvista.com
+L: linux-net@vger.kernel.org
+S: Supported
+
KERNEL NFSD
P: Neil Brown
M: neilb@cse.unsw.edu.au
--- diff/arch/i386/Kconfig 2004-10-04 15:13:06.000000000 +0100
+++ source/arch/i386/Kconfig 2004-10-04 22:35:19.000000000 +0100
@@ -1178,6 +1178,14 @@
source "fs/Kconfig.binfmt"
+config TRAP_BAD_SYSCALL_EXITS
+ bool "Debug bad system call exits"
+ depends on KGDB
+ help
+ If you say Y here the kernel will check for system calls which
+ return without clearing preempt.
+ default n
+
endmenu
source "drivers/Kconfig"
--- diff/arch/i386/Kconfig.debug 2004-10-04 15:13:06.000000000 +0100
+++ source/arch/i386/Kconfig.debug 2004-10-04 22:35:19.000000000 +0100
@@ -77,4 +77,6 @@
depends on X86_LOCAL_APIC && !X86_VISWS
default y
+source "arch/i386/Kconfig.kgdb"
+
endmenu
--- diff/arch/i386/Makefile 2004-10-04 15:13:06.000000000 +0100
+++ source/arch/i386/Makefile 2004-10-04 22:35:19.000000000 +0100
@@ -98,6 +98,9 @@
# default subarch .h files
mflags-y += -Iinclude/asm-i386/mach-default
+mflags-$(CONFIG_KGDB) += -gdwarf-2
+mflags-$(CONFIG_KGDB_MORE) += $(shell echo $(CONFIG_KGDB_OPTIONS) | sed -e 's/"//g')
+
head-y := arch/i386/kernel/head.o arch/i386/kernel/init_task.o
libs-y += arch/i386/lib/
--- diff/arch/i386/kernel/Makefile 2004-10-04 15:13:06.000000000 +0100
+++ source/arch/i386/kernel/Makefile 2004-10-04 22:35:19.000000000 +0100
@@ -14,6 +14,7 @@
obj-$(CONFIG_ACPI_BOOT) += acpi/
obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o
obj-$(CONFIG_MCA) += mca.o
+obj-$(CONFIG_KGDB) += kgdb_stub.o
obj-$(CONFIG_X86_MSR) += msr.o
obj-$(CONFIG_X86_CPUID) += cpuid.o
obj-$(CONFIG_MICROCODE) += microcode.o
--- diff/arch/i386/kernel/entry.S 2004-10-04 15:13:06.000000000 +0100
+++ source/arch/i386/kernel/entry.S 2004-10-04 22:35:19.000000000 +0100
@@ -48,6 +48,18 @@
#include <asm/smp.h>
#include <asm/page.h>
#include "irq_vectors.h"
+ /* We do not recover from a stack overflow, but at least
+ * we know it happened and should be able to track it down.
+ */
+#ifdef CONFIG_STACK_OVERFLOW_TEST
+#define STACK_OVERFLOW_TEST \
+ testl $(THREAD_SIZE - 512),%esp; \
+ jnz 10f; \
+ call stack_overflow; \
+10:
+#else
+#define STACK_OVERFLOW_TEST
+#endif
#define nr_syscalls ((syscall_table_size)/4)
@@ -94,7 +106,8 @@
pushl %ebx; \
movl $(__USER_DS), %edx; \
movl %edx, %ds; \
- movl %edx, %es;
+ movl %edx, %es; \
+ STACK_OVERFLOW_TEST
#define RESTORE_INT_REGS \
popl %ebx; \
@@ -232,6 +245,7 @@
# sysenter call handler stub
ENTRY(sysenter_entry)
movl TSS_sysenter_esp0(%esp),%esp
+ .globl sysenter_past_esp
sysenter_past_esp:
sti
pushl $(__USER_DS)
@@ -294,6 +308,19 @@
testw $_TIF_ALLWORK_MASK, %cx # current->work
jne syscall_exit_work
restore_all:
+#ifdef CONFIG_TRAP_BAD_SYSCALL_EXITS
+ movl EFLAGS(%esp), %eax # mix EFLAGS and CS
+ movb CS(%esp), %al
+ testl $(VM_MASK | 3), %eax
+ jz resume_kernelX # returning to kernel or vm86-space
+
+ cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ?
+ jz resume_kernelX
+
+ int $3
+
+resume_kernelX:
+#endif
RESTORE_ALL
# perform work that needs to be done immediately before resumption
--- diff/arch/i386/kernel/nmi.c 2004-10-04 15:13:06.000000000 +0100
+++ source/arch/i386/kernel/nmi.c 2004-10-04 22:35:19.000000000 +0100
@@ -34,7 +34,17 @@
#include "mach_traps.h"
+#ifdef CONFIG_KGDB
+#include <asm/kgdb.h>
+#ifdef CONFIG_SMP
+unsigned int nmi_watchdog = NMI_IO_APIC;
+#else
+unsigned int nmi_watchdog = NMI_LOCAL_APIC;
+#endif
+#else
unsigned int nmi_watchdog = NMI_NONE;
+#endif
+
extern int unknown_nmi_panic;
static unsigned int nmi_hz = HZ;
static unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */
@@ -466,6 +476,9 @@
for (i = 0; i < NR_CPUS; i++)
alert_counter[i] = 0;
}
+#ifdef CONFIG_KGDB
+int tune_watchdog = 5*HZ;
+#endif
extern void die_nmi(struct pt_regs *, const char *msg);
@@ -481,12 +494,24 @@
sum = irq_stat[cpu].apic_timer_irqs;
+#ifdef CONFIG_KGDB
+ if (!in_kgdb(regs) && last_irq_sums[cpu] == sum) {
+
+#else
if (last_irq_sums[cpu] == sum) {
+#endif
/*
* Ayiee, looks like this CPU is stuck ...
* wait a few IRQs (5 seconds) before doing the oops ...
*/
alert_counter[cpu]++;
+#ifdef CONFIG_KGDB
+ if (alert_counter[cpu] == tune_watchdog) {
+ kgdb_handle_exception(2, SIGPWR, 0, regs);
+ last_irq_sums[cpu] = sum;
+ alert_counter[cpu] = 0;
+ }
+#endif
if (alert_counter[cpu] == 5*nmi_hz)
die_nmi(regs, "NMI Watchdog detected LOCKUP");
} else {
--- diff/arch/i386/kernel/smp.c 2004-10-04 15:13:06.000000000 +0100
+++ source/arch/i386/kernel/smp.c 2004-10-04 22:35:20.000000000 +0100
@@ -466,7 +466,17 @@
{
on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
}
-
+#ifdef CONFIG_KGDB
+/*
+ * By using the NMI code instead of a vector we just sneak thru the
+ * word generator coming out with just what we want. AND it does
+ * not matter if clustered_apic_mode is set or not.
+ */
+void smp_send_nmi_allbutself(void)
+{
+ send_IPI_allbutself(APIC_DM_NMI);
+}
+#endif
/*
* this function sends a 'reschedule' IPI to another CPU.
* it goes straight through and wastes no time serializing
--- diff/arch/i386/kernel/traps.c 2004-10-04 15:13:06.000000000 +0100
+++ source/arch/i386/kernel/traps.c 2004-10-04 22:35:20.000000000 +0100
@@ -116,6 +116,40 @@
return 1;
}
+#ifdef CONFIG_KGDB
+extern void sysenter_past_esp(void);
+#include <asm/kgdb.h>
+#include <linux/init.h>
+void set_intr_gate(unsigned int n, void *addr);
+static void set_intr_usr_gate(unsigned int n, void *addr);
+/*
+ * Should be able to call this breakpoint() very early in
+ * bring up. Just hard code the call where needed.
+ * The breakpoint() code is here because set_?_gate() functions
+ * are local (static) to trap.c. They need be done only once,
+ * but it does not hurt to do them over.
+ */
+void breakpoint(void)
+{
+ set_intr_usr_gate(3,&int3); /* disable ints on trap */
+ set_intr_gate(1,&debug);
+ set_intr_gate(14,&page_fault);
+
+ BREAKPOINT;
+}
+#define CHK_REMOTE_DEBUG(trapnr,signr,error_code,regs,after) \
+ { \
+ if (!user_mode(regs) ) \
+ { \
+ kgdb_handle_exception(trapnr, signr, error_code, regs); \
+ after; \
+ } else if ((trapnr == 3) && (regs->eflags &0x200)) local_irq_enable(); \
+ }
+#else
+#define CHK_REMOTE_DEBUG(trapnr,signr,error_code,regs,after)
+#endif
+
+
#ifdef CONFIG_FRAME_POINTER
static void print_context_stack(struct task_struct *task, unsigned long *stack,
unsigned long ebp)
@@ -347,6 +381,15 @@
#endif
if (nl)
printk("\n");
+#ifdef CONFIG_KGDB
+ /* This is about the only place we want to go to kgdb even if in
+ * user mode. But we must go in via a trap so within kgdb we will
+ * always be in kernel mode.
+ */
+ if (user_mode(regs))
+ BREAKPOINT;
+#endif
+ CHK_REMOTE_DEBUG(0,SIGTRAP,err,regs,)
notify_die(DIE_OOPS, (char *)str, regs, err, 255, SIGSEGV);
show_registers(regs);
} else
@@ -421,6 +464,7 @@
#define DO_ERROR(trapnr, signr, str, name) \
asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
{ \
+ CHK_REMOTE_DEBUG(trapnr,signr,error_code,regs,) \
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
== NOTIFY_OK) \
return; \
@@ -444,6 +488,7 @@
#define DO_VM86_ERROR(trapnr, signr, str, name) \
asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
{ \
+ CHK_REMOTE_DEBUG(trapnr, signr, error_code,regs, return) \
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
== NOTIFY_OK) \
return; \
@@ -527,6 +572,7 @@
gp_in_kernel:
if (!fixup_exception(regs)) {
+ CHK_REMOTE_DEBUG(13,SIGSEGV,error_code,regs,)
if (notify_die(DIE_GPF, "general protection fault", regs,
error_code, 13, SIGSEGV) == NOTIFY_OK);
return;
@@ -736,8 +782,18 @@
* allowing programs to debug themselves without the ptrace()
* interface.
*/
+#ifdef CONFIG_KGDB
+ /*
+ * I think this is the only "real" case of a TF in the kernel
+ * that really belongs to user space. Others are
+ * "Ours all ours!"
+ */
+ if (((regs->xcs & 3) == 0) && ((void *)regs->eip == sysenter_past_esp))
+ goto clear_TF_reenable;
+#else
if ((regs->xcs & 3) == 0)
goto clear_TF_reenable;
+#endif
if ((tsk->ptrace & (PT_DTRACE|PT_PTRACED)) == PT_DTRACE)
goto clear_TF;
}
@@ -749,6 +805,17 @@
info.si_errno = 0;
info.si_code = TRAP_BRKPT;
+#ifdef CONFIG_KGDB
+ /*
+ * If this is a kernel mode trap, we need to reset db7 to allow us
+ * to continue sanely ALSO skip the signal delivery
+ */
+ if ((regs->xcs & 3) == 0)
+ goto clear_dr7;
+
+ /* if not kernel, allow ints but only if they were on */
+ if ( regs->eflags & 0x200) local_irq_enable();
+#endif
/* If this is a kernel mode trap, save the user PC on entry to
* the kernel, that's what the debugger can make sense of.
*/
@@ -763,6 +830,7 @@
__asm__("movl %0,%%db7"
: /* no output */
: "r" (0));
+ CHK_REMOTE_DEBUG(1,SIGTRAP,error_code,regs,)
return;
debug_vm86:
@@ -1019,6 +1087,12 @@
{
_set_gate(a,12,3,addr,__KERNEL_CS);
}
+#ifdef CONFIG_KGDB
+void set_intr_usr_gate(unsigned int n, void *addr)
+{
+ _set_gate(idt_table+n,14,3,addr,__KERNEL_CS);
+}
+#endif
static void __init set_task_gate(unsigned int n, unsigned int gdt_entry)
{
@@ -1041,7 +1115,11 @@
set_trap_gate(0,÷_error);
set_intr_gate(1,&debug);
set_intr_gate(2,&nmi);
+#ifndef CONFIG_KGDB
set_system_intr_gate(3, &int3); /* int3-5 can be called from all */
+#else
+ set_intr_usr_gate(3,&int3); /* int3-5 can be called from all */
+#endif
set_system_gate(4,&overflow);
set_system_gate(5,&bounds);
set_trap_gate(6,&invalid_op);
--- diff/arch/i386/lib/Makefile 2004-09-20 20:41:07.000000000 +0100
+++ source/arch/i386/lib/Makefile 2004-10-04 22:35:20.000000000 +0100
@@ -8,3 +8,4 @@
lib-$(CONFIG_X86_USE_3DNOW) += mmx.o
lib-$(CONFIG_HAVE_DEC_LOCK) += dec_and_lock.o
+lib-$(CONFIG_KGDB) += kgdb_serial.o
--- diff/arch/i386/mm/fault.c 2004-10-04 15:13:06.000000000 +0100
+++ source/arch/i386/mm/fault.c 2004-10-04 22:35:20.000000000 +0100
@@ -430,6 +430,12 @@
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
*/
+#ifdef CONFIG_KGDB
+ if (!user_mode(regs)){
+ kgdb_handle_exception(14,SIGBUS, error_code, regs);
+ return;
+ }
+#endif
bust_spinlocks(1);
--- diff/arch/x86_64/boot/compressed/head.S 2004-05-19 22:11:28.000000000 +0100
+++ source/arch/x86_64/boot/compressed/head.S 2004-10-04 22:35:20.000000000 +0100
@@ -26,6 +26,7 @@
.code32
.text
+#define IN_BOOTLOADER
#include <linux/linkage.h>
#include <asm/segment.h>
--- diff/arch/x86_64/boot/compressed/misc.c 2004-06-30 14:25:43.000000000 +0100
+++ source/arch/x86_64/boot/compressed/misc.c 2004-10-04 22:35:20.000000000 +0100
@@ -9,6 +9,7 @@
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
+#define IN_BOOTLOADER
#include "miscsetup.h"
#include <asm/io.h>
--- diff/drivers/char/keyboard.c 2004-10-04 15:13:08.000000000 +0100
+++ source/drivers/char/keyboard.c 2004-10-04 22:35:20.000000000 +0100
@@ -1078,6 +1078,9 @@
}
if (sysrq_down && down && !rep) {
handle_sysrq(kbd_sysrq_xlate[keycode], regs, tty);
+#ifdef CONFIG_KGDB_SYSRQ
+ sysrq_down = 0; /* in case we miss the "up" event */
+#endif
return;
}
#endif
--- diff/drivers/char/sysrq.c 2004-06-30 14:25:45.000000000 +0100
+++ source/drivers/char/sysrq.c 2004-10-04 22:35:20.000000000 +0100
@@ -35,6 +35,25 @@
#include <linux/spinlock.h>
#include <asm/ptrace.h>
+#ifdef CONFIG_KGDB_SYSRQ
+
+#define GDB_OP &kgdb_op
+static void kgdb_sysrq(int key, struct pt_regs *pt_regs, struct tty_struct *tty)
+{
+ printk("kgdb sysrq\n");
+ breakpoint();
+}
+
+static struct sysrq_key_op kgdb_op = {
+ .handler = kgdb_sysrq,
+ .help_msg = "kGdb|Fgdb",
+ .action_msg = "Debug breakpoint\n",
+};
+
+#else
+#define GDB_OP NULL
+#endif
+
extern void reset_vc(unsigned int);
@@ -238,8 +257,8 @@
/* c */ NULL,
/* d */ NULL,
/* e */ &sysrq_term_op,
-/* f */ NULL,
-/* g */ NULL,
+/* f */ GDB_OP,
+/* g */ GDB_OP,
/* h */ NULL,
/* i */ &sysrq_kill_op,
/* j */ NULL,
--- diff/drivers/serial/8250.c 2004-10-04 15:13:10.000000000 +0100
+++ source/drivers/serial/8250.c 2004-10-04 22:35:20.000000000 +0100
@@ -873,7 +873,7 @@
if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
tty->flip.work.func((void *)tty);
if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- return; // if TTY_DONT_FLIP is set
+ return; /* if TTY_DONT_FLIP is set */
}
ch = serial_inp(up, UART_RX);
*tty->flip.char_buf_ptr = ch;
@@ -1234,12 +1234,21 @@
spin_unlock_irqrestore(&up->port.lock, flags);
}
+#ifdef CONFIG_KGDB
+static int kgdb_irq = -1;
+#endif
+
static int serial8250_startup(struct uart_port *port)
{
struct uart_8250_port *up = (struct uart_8250_port *)port;
unsigned long flags;
int retval;
+#ifdef CONFIG_KGDB
+ if (up->port.irq == kgdb_irq)
+ return -EBUSY;
+#endif
+
up->capabilities = uart_config[up->port.type].flags;
up->mcr = 0;
@@ -1870,6 +1879,10 @@
for (i = 0; i < UART_NR; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
+#ifdef CONFIG_KGDB
+ if (up->port.irq == kgdb_irq)
+ up->port.kgdb = 1;
+#endif
up->port.line = i;
up->port.ops = &serial8250_pops;
init_timer(&up->timer);
@@ -2153,6 +2166,31 @@
uart_resume_port(&serial8250_reg, &serial8250_ports[line].port);
}
+#ifdef CONFIG_KGDB
+/*
+ * Find all the ports using the given irq and shut them down.
+ * Result should be that the irq will be released.
+ */
+void shutdown_for_kgdb(struct async_struct * info)
+{
+ int irq = info->state->irq;
+ struct uart_8250_port *up;
+ int ttyS;
+
+ kgdb_irq = irq; /* save for later init */
+ for (ttyS = 0; ttyS < UART_NR; ttyS++){
+ up = &serial8250_ports[ttyS];
+ if (up->port.irq == irq && (irq_lists + irq)->head) {
+#ifdef CONFIG_DEBUG_SPINLOCK /* ugly business... */
+ if(up->port.lock.magic != SPINLOCK_MAGIC)
+ spin_lock_init(&up->port.lock);
+#endif
+ serial8250_shutdown(&up->port);
+ }
+ }
+}
+#endif /* CONFIG_KGDB */
+
static int __init serial8250_init(void)
{
int ret, i;
--- diff/drivers/serial/serial_core.c 2004-10-04 15:13:10.000000000 +0100
+++ source/drivers/serial/serial_core.c 2004-10-04 22:35:20.000000000 +0100
@@ -1981,6 +1981,11 @@
{
unsigned int flags;
+#ifdef CONFIG_KGDB
+ if (port->kgdb)
+ return;
+#endif
+
/*
* If there isn't a port here, don't do anything further.
*/
--- diff/include/asm-i386/bugs.h 2004-05-19 22:12:40.000000000 +0100
+++ source/include/asm-i386/bugs.h 2004-10-04 22:35:20.000000000 +0100
@@ -1,11 +1,11 @@
/*
* include/asm-i386/bugs.h
*
- * Copyright (C) 1994 Linus Torvalds
+ * Copyright (C) 1994 Linus Torvalds
*
* Cyrix stuff, June 1998 by:
* - Rafael R. Reilova (moved everything from head.S),
- * <rreilova@ececs.uc.edu>
+ * <rreilova@ececs.uc.edu>
* - Channing Corn (tests & fixes),
* - Andrew D. Balsa (code cleanup).
*
@@ -25,7 +25,20 @@
#include <asm/processor.h>
#include <asm/i387.h>
#include <asm/msr.h>
-
+#ifdef CONFIG_KGDB
+/*
+ * Provied the command line "gdb" initial break
+ */
+int __init kgdb_initial_break(char * str)
+{
+ if (*str == '\0'){
+ breakpoint();
+ return 1;
+ }
+ return 0;
+}
+__setup("gdb",kgdb_initial_break);
+#endif
static int __init no_halt(char *s)
{
boot_cpu_data.hlt_works_ok = 0;
@@ -140,7 +153,7 @@
: "ecx", "edi" );
/* If this fails, it means that any user program may lock the CPU hard. Too bad. */
if (res != 12345678) printk( "Buggy.\n" );
- else printk( "OK.\n" );
+ else printk( "OK.\n" );
#endif
}
--- diff/include/linux/config.h 2004-05-19 22:12:58.000000000 +0100
+++ source/include/linux/config.h 2004-10-04 22:35:21.000000000 +0100
@@ -2,5 +2,8 @@
#define _LINUX_CONFIG_H
#include <linux/autoconf.h>
+#if defined(__i386__) && !defined(IN_BOOTLOADER)
+#include <asm/kgdb.h>
+#endif
#endif
--- diff/include/linux/serial_core.h 2004-10-04 15:13:14.000000000 +0100
+++ source/include/linux/serial_core.h 2004-10-04 22:35:21.000000000 +0100
@@ -172,7 +172,9 @@
unsigned char x_char; /* xon/xoff char */
unsigned char regshift; /* reg offset shift */
unsigned char iotype; /* io access style */
-
+#ifdef CONFIG_KGDB
+ int kgdb; /* in use by kgdb */
+#endif
#define UPIO_PORT (0)
#define UPIO_HUB6 (1)
#define UPIO_MEM (2)
--- diff/include/linux/spinlock.h 2004-10-04 15:13:14.000000000 +0100
+++ source/include/linux/spinlock.h 2004-10-04 22:35:21.000000000 +0100
@@ -15,6 +15,12 @@
#include <asm/processor.h> /* for cpu relax */
#include <asm/system.h>
+#ifdef CONFIG_KGDB
+#include <asm/current.h>
+#define SET_WHO(x, him) (x)->who = him;
+#else
+#define SET_WHO(x, him)
+#endif
/*
* Must define these before including other files, inline functions need them
@@ -88,6 +94,9 @@
const char *module;
char *owner;
int oline;
+#ifdef CONFIG_KGDB
+ struct task_struct *who;
+#endif
} spinlock_t;
#define SPIN_LOCK_UNLOCKED (spinlock_t) { SPINLOCK_MAGIC, 0, 10, __FILE__ , NULL, 0}
@@ -99,6 +108,7 @@
(x)->module = __FILE__; \
(x)->owner = NULL; \
(x)->oline = 0; \
+ SET_WHO(x, NULL) \
} while (0)
#define CHECK_LOCK(x) \
@@ -121,6 +131,7 @@
(x)->lock = 1; \
(x)->owner = __FILE__; \
(x)->oline = __LINE__; \
+ SET_WHO(x, current) \
} while (0)
/* without debugging, spin_is_locked on UP always says
@@ -151,6 +162,7 @@
(x)->lock = 1; \
(x)->owner = __FILE__; \
(x)->oline = __LINE__; \
+ SET_WHO(x, current) \
1; \
})
--- diff/kernel/pid.c 2004-10-04 15:13:14.000000000 +0100
+++ source/kernel/pid.c 2004-10-04 22:35:21.000000000 +0100
@@ -263,6 +263,9 @@
* machine. From a minimum of 16 slots up to 4096 slots at one gigabyte or
* more.
*/
+#ifdef CONFIG_KGDB
+int kgdb_pid_init_done; /* so we don't call prior to... */
+#endif
void __init pidhash_init(void)
{
int i, j, pidhash_size;
@@ -284,6 +287,9 @@
for (j = 0; j < pidhash_size; j++)
INIT_HLIST_HEAD(&pid_hash[i][j]);
}
+#ifdef CONFIG_KGDB
+ kgdb_pid_init_done++;
+#endif
}
void __init pidmap_init(void)
--- diff/kernel/sched.c 2004-10-04 15:13:14.000000000 +0100
+++ source/kernel/sched.c 2004-10-04 22:35:21.000000000 +0100
@@ -3076,6 +3076,13 @@
EXPORT_SYMBOL(set_user_nice);
+#ifdef CONFIG_KGDB
+struct task_struct *kgdb_get_idle(int this_cpu)
+{
+ return cpu_rq(this_cpu)->idle;
+}
+#endif
+
#ifdef __ARCH_WANT_SYS_NICE
/*
--- diff/Documentation/i386/kgdb/andthen 1970-01-01 01:00:00.000000000 +0100
+++ source/Documentation/i386/kgdb/andthen 2004-10-04 22:35:21.000000000 +0100
@@ -0,0 +1,100 @@
+
+define set_andthen
+ set var $thp=0
+ set var $thp=(struct kgdb_and_then_struct *)&kgdb_data[0]
+ set var $at_size = (sizeof kgdb_data)/(sizeof *$thp)
+ set var $at_oc=kgdb_and_then_count
+ set var $at_cc=$at_oc
+end
+
+define andthen_next
+ set var $at_cc=$arg0
+end
+
+define andthen
+ andthen_set_edge
+ if ($at_cc >= $at_oc)
+ printf "Outside window. Window size is %d\n",($at_oc-$at_low)
+ else
+ printf "%d: ",$at_cc
+ output *($thp+($at_cc++ % $at_size ))
+ printf "\n"
+ end
+end
+define andthen_set_edge
+ set var $at_oc=kgdb_and_then_count
+ set var $at_low = $at_oc - $at_size
+ if ($at_low < 0 )
+ set var $at_low = 0
+ end
+ if (( $at_cc > $at_oc) || ($at_cc < $at_low))
+ printf "Count outside of window, setting count to "
+ if ($at_cc >= $at_oc)
+ set var $at_cc = $at_oc
+ else
+ set var $at_cc = $at_low
+ end
+ printf "%d\n",$at_cc
+ end
+end
+
+define beforethat
+ andthen_set_edge
+ if ($at_cc <= $at_low)
+ printf "Outside window. Window size is %d\n",($at_oc-$at_low)
+ else
+ printf "%d: ",$at_cc-1
+ output *($thp+(--$at_cc % $at_size ))
+ printf "\n"
+ end
+end
+
+document andthen_next
+ andthen_next <count>
+ . sets the number of the event to display next. If this event
+ . is not in the event pool, either andthen or beforethat will
+ . correct it to the nearest event pool edge. The event pool
+ . ends at the last event recorded and begins <number of events>
+ . prior to that. If beforethat is used next, it will display
+ . event <count> -1.
+.
+ andthen commands are: set_andthen, andthen_next, andthen and beforethat
+end
+
+
+document andthen
+ andthen
+. displays the next event in the list. <set_andthen> sets up to display
+. the oldest saved event first.
+. <count> (optional) count of the event to display.
+. note the number of events saved is specified at configure time.
+. if events are saved between calls to andthen the index will change
+. but the displayed event will be the next one (unless the event buffer
+. is overrun).
+.
+. andthen commands are: set_andthen, andthen_next, andthen and beforethat
+end
+
+document set_andthen
+ set_andthen
+. sets up to use the <andthen> and <beforethat> commands.
+. if you have defined your own struct, use the above and
+. then enter the following:
+. p $thp=(struct kgdb_and_then_structX *)&kgdb_data[0]
+. where <kgdb_and_then_structX> is the name of your structure.
+.
+. andthen commands are: set_andthen, andthen_next, andthen and beforethat
+end
+
+document beforethat
+ beforethat
+. displays the next prior event in the list. <set_andthen> sets up to
+. display the last occuring event first.
+.
+. note the number of events saved is specified at configure time.
+. if events are saved between calls to beforethat the index will change
+. but the displayed event will be the next one (unless the event buffer
+. is overrun).
+.
+. andthen commands are: set_andthen, andthen_next, andthen and beforethat
+end
--- diff/Documentation/i386/kgdb/debug-nmi.txt 1970-01-01 01:00:00.000000000 +0100
+++ source/Documentation/i386/kgdb/debug-nmi.txt 2004-10-04 22:35:21.000000000 +0100
@@ -0,0 +1,37 @@
+Subject: Debugging with NMI
+Date: Mon, 12 Jul 1999 11:28:31 -0500
+From: David Grothe <dave@gcom.com>
+Organization: Gcom, Inc
+To: David Grothe <dave@gcom.com>
+
+Kernel hackers:
+
+Maybe this is old hat, but it is new to me --
+
+On an ISA bus machine, if you short out the A1 and B1 pins of an ISA
+slot you will generate an NMI to the CPU. This interrupts even a
+machine that is hung in a loop with interrupts disabled. Used in
+conjunction with kgdb <
+ftp://ftp.gcom.com/pub/linux/src/kgdb-2.3.35/kgdb-2.3.35.tgz > you can
+gain debugger control of a machine that is hung in the kernel! Even
+without kgdb the kernel will print a stack trace so you can find out
+where it was hung.
+
+The A1/B1 pins are directly opposite one another and the farthest pins
+towards the bracket end of the ISA bus socket. You can stick a paper
+clip or multi-meter probe between them to short them out.
+
+I had a spare ISA bus to PC104 bus adapter around. The PC104 end of the
+board consists of two rows of wire wrap pins. So I wired a push button
+between the A1/B1 pins and now have an ISA board that I can stick into
+any ISA bus slot for debugger entry.
+
+Microsoft has a circuit diagram of a PCI card at
+http://www.microsoft.com/hwdev/DEBUGGING/DMPSW.HTM. If you want to
+build one you will have to mail them and ask for the PAL equations.
+Nobody makes one comercially.
+
+[THIS TIP COMES WITH NO WARRANTY WHATSOEVER. It works for me, but if
+your machine catches fire, it is your problem, not mine.]
+
+-- Dave (the kgdb guy)
--- diff/Documentation/i386/kgdb/gdb-globals.txt 1970-01-01 01:00:00.000000000 +0100
+++ source/Documentation/i386/kgdb/gdb-globals.txt 2004-10-04 22:35:21.000000000 +0100
@@ -0,0 +1,71 @@
+Sender: akale@veritas.com
+Date: Fri, 23 Jun 2000 19:26:35 +0530
+From: "Amit S. Kale" <akale@veritas.com>
+Organization: Veritas Software (India)
+To: Dave Grothe <dave@gcom.com>, linux-kernel@vger.rutgers.edu
+CC: David Milburn <dmilburn@wirespeed.com>,
+ "Edouard G. Parmelan" <Edouard.Parmelan@quadratec.fr>,
+ ezannoni@cygnus.com, Keith Owens <kaos@ocs.com.au>
+Subject: Re: Module debugging using kgdb
+
+Dave Grothe wrote:
+>
+> Amit:
+>
+> There is a 2.4.0 version of kgdb on our ftp site:
+> ftp://ftp.gcom.com/pub/linux/src/kgdb. I mirrored your version of gdb
+> and loadmodule.sh there.
+>
+> Have a look at the README file and see if I go it right. If not, send
+> me some corrections and I will update it.
+>
+> Does your version of gdb solve the global variable problem?
+
+Yes.
+Thanks to Elena Zanoni, gdb (developement version) can now calculate
+correctly addresses of dynamically loaded object files. I have not been
+following gdb developement for sometime and am not sure when symbol
+address calculation fix is going to appear in a gdb stable version.
+
+Elena, any idea when the fix will make it to a prebuilt gdb from a
+redhat release?
+
+For the time being I have built a gdb developement version. It can be
+used for module debugging with loadmodule.sh script.
+
+The problem with calculating of module addresses with previous versions
+of gdb was as follows:
+gdb did not use base address of a section while calculating address of
+a symbol in the section in an object file loaded via 'add-symbol-file'.
+It used address of .text segment instead. Due to this addresses of
+symbols in .data, .bss etc. (e.g. global variables) were calculated incorrectly.
+
+Above mentioned fix allow gdb to use base address of a segment while
+calculating address of a symbol in it. It adds a parameter '-s' to
+'add-symbol-file' command for specifying base address of a segment.
+
+loadmodule.sh script works as follows.
+
+1. Copy a module file to target machine.
+2. Load the module on the target machine using insmod with -m parameter.
+insmod produces a module load map which contains base addresses of all
+sections in the module and addresses of symbols in the module file.
+3. Find all sections and their base addresses in the module from
+the module map.
+4. Generate a script that loads the module file. The script uses
+'add-symbol-file' and specifies address of text segment followed by
+addresses of all segments in the module.
+
+Here is an example gdb script produced by loadmodule.sh script.
+
+add-symbol-file foo 0xd082c060 -s .text.lock 0xd08cbfb5
+-s .fixup 0xd08cfbdf -s .rodata 0xd08cfde0 -s __ex_table 0xd08e3b38
+-s .data 0xd08e3d00 -s .bss 0xd08ec8c0 -s __ksymtab 0xd08ee838
+
+With this command gdb can calculate addresses of symbols in ANY segment
+in a module file.
+
+Regards.
+--
+Amit Kale
+Veritas Software ( http://www.veritas.com )
--- diff/Documentation/i386/kgdb/gdbinit 1970-01-01 01:00:00.000000000 +0100
+++ source/Documentation/i386/kgdb/gdbinit 2004-10-04 22:35:21.000000000 +0100
@@ -0,0 +1,14 @@
+shell echo -e "\003" >/dev/ttyS0
+set remotebaud 38400
+target remote /dev/ttyS0
+define si
+stepi
+printf "EAX=%08x EBX=%08x ECX=%08x EDX=%08x\n", $eax, $ebx, $ecx, $edx
+printf "ESI=%08x EDI=%08x EBP=%08x ESP=%08x\n", $esi, $edi, $ebp, $esp
+x/i $eip
+end
+define ni
+nexti
+printf "EAX=%08x EBX=%08x ECX=%08x EDX=%08x\n", $eax, $ebx, $ecx, $edx
+printf "ESI=%08x EDI=%08x EBP=%08x ESP=%08x\n", $esi, $edi, $ebp, $esp
+x/i $eip
--- diff/Documentation/i386/kgdb/gdbinit-modules 1970-01-01 01:00:00.000000000 +0100
+++ source/Documentation/i386/kgdb/gdbinit-modules 2004-10-04 22:35:21.000000000 +0100
@@ -0,0 +1,146 @@
+#
+# Usefull GDB user-command to debug Linux Kernel Modules with gdbstub.
+#
+# This don't work for Linux-2.0 or older.
+#
+# Author Edouard G. Parmelan <Edouard.Parmelan@quadratec.fr>
+#
+#
+# Fri Apr 30 20:33:29 CEST 1999
+# First public release.
+#
+# Major cleanup after experiment Linux-2.0 kernel without success.
+# Symbols of a module are not in the correct order, I can't explain
+# why :(
+#
+# Fri Mar 19 15:41:40 CET 1999
+# Initial version.
+#
+# Thu Jan 6 16:29:03 CST 2000
+# A little fixing by Dave Grothe <dave@gcom.com>
+#
+# Mon Jun 19 09:33:13 CDT 2000
+# Alignment changes from Edouard Parmelan
+#
+# The basic idea is to find where insmod load the module and inform
+# GDB to load the symbol table of the module with the GDB command
+# ``add-symbol-file <object> <address>''.
+#
+# The Linux kernel holds the list of all loaded modules in module_list,
+# this list end with &kernel_module (exactly with module->next == NULL,
+# but the last module is not a real module).
+#
+# Insmod allocates the struct module before the object file. Since
+# Linux-2.1, this structure contain his size. The real address of
+# the object file is then (char*)module + module->size_of_struct.
+#
+# You can use three user functions ``mod-list'', ``mod-print-symbols''
+# and ``add-module-symbols''.
+#
+# mod-list list all loaded modules with the format:
+# <module-address> <module-name>
+#
+# As soon as you have found the address of your module, you can
+# print its exported symbols (mod-print-symbols) or inform GDB to add
+# symbols from your module file (mod-add-symbols).
+#
+# The argument that you give to mod-print-symbols or mod-add-symbols
+# is the <module-address> from the mod-list command.
+#
+# When using the mod-add-symbols command you must also give the full
+# pathname of the modules object code file.
+#
+# The command mod-add-lis is an example of how to make this easier.
+# You can edit this macro to contain the path name of your own
+# favorite module and then use it as a shorthand to load it. You
+# still need the module-address, however.
+#
+# The internal function ``mod-validate'' set the GDB variable $mod
+# as a ``struct module*'' if the kernel known the module otherwise
+# $mod is set to NULL. This ensure to not add symbols for a wrong
+# address.
+#
+# Have a nice hacking day !
+#
+#
+define mod-list
+ set $mod = (struct module*)module_list
+ # the last module is the kernel, ignore it
+ while $mod != &kernel_module
+ printf "%p\t%s\n", (long)$mod, ($mod)->name
+ set $mod = $mod->next
+ end
+end
+document mod-list
+List all modules in the form: <module-address> <module-name>
+Use the <module-address> as the argument for the other
+mod-commands: mod-print-symbols, mod-add-symbols.
+end
+
+define mod-validate
+ set $mod = (struct module*)module_list
+ while ($mod != $arg0) && ($mod != &kernel_module)
+ set $mod = $mod->next
+ end
+ if $mod == &kernel_module
+ set $mod = 0
+ printf "%p is not a module\n", $arg0
+ end
+end
+document mod-validate
+mod-validate <module-address>
+Internal user-command used to validate the module parameter.
+If <module> is a real loaded module, set $mod to it otherwise set $mod to 0.
+end
+
+
+define mod-print-symbols
+ mod-validate $arg0
+ if $mod != 0
+ set $i = 0
+ while $i < $mod->nsyms
+ set $sym = $mod->syms[$i]
+ printf "%p\t%s\n", $sym->value, $sym->name
+ set $i = $i + 1
+ end
+ end
+end
+document mod-print-symbols
+mod-print-symbols <module-address>
+Print all exported symbols of the module. see mod-list
+end
+
+
+define mod-add-symbols-align
+ mod-validate $arg0
+ if $mod != 0
+ set $mod_base = ($mod->size_of_struct + (long)$mod)
+ if ($arg2 != 0) && (($mod_base & ($arg2 - 1)) != 0)
+ set $mod_base = ($mod_base | ($arg2 - 1)) + 1
+ end
+ add-symbol-file $arg1 $mod_base
+ end
+end
+document mod-add-symbols-align
+mod-add-symbols-align <module-address> <object file path name> <align>
+Load the symbols table of the module from the object file where
+first section aligment is <align>.
+To retreive alignment, use `objdump -h <object file path name>'.
+end
+
+define mod-add-symbols
+ mod-add-symbols-align $arg0 $arg1 sizeof(long)
+end
+document mod-add-symbols
+mod-add-symbols <module-address> <object file path name>
+Load the symbols table of the module from the object file.
+Default alignment is 4. See mod-add-symbols-align.
+end
+
+define mod-add-lis
+ mod-add-symbols-align $arg0 /usr/src/LiS/streams.o 16
+end
+document mod-add-lis
+mod-add-lis <module-address>
+Does mod-add-symbols <module-address> /usr/src/LiS/streams.o
+end
--- diff/Documentation/i386/kgdb/gdbinit.hw 1970-01-01 01:00:00.000000000 +0100
+++ source/Documentation/i386/kgdb/gdbinit.hw 2004-10-04 22:35:21.000000000 +0100
@@ -0,0 +1,117 @@
+
+#Using ia-32 hardware breakpoints.
+#
+#4 hardware breakpoints are available in ia-32 processors. These breakpoints
+#do not need code modification. They are set using debug registers.
+#
+#Each hardware breakpoint can be of one of the
+#three types: execution, write, access.
+#1. An Execution breakpoint is triggered when code at the breakpoint address is
+#executed.
+#2. A write breakpoint ( aka watchpoints ) is triggered when memory location
+#at the breakpoint address is written.
+#3. An access breakpoint is triggered when memory location at the breakpoint
+#address is either read or written.
+#
+#As hardware breakpoints are available in limited number, use software
+#breakpoints ( br command in gdb ) instead of execution hardware breakpoints.
+#
+#Length of an access or a write breakpoint defines length of the datatype to
+#be watched. Length is 1 for char, 2 short , 3 int.
+#
+#For placing execution, write and access breakpoints, use commands
+#hwebrk, hwwbrk, hwabrk
+#To remove a breakpoint use hwrmbrk command.
+#
+#These commands take following types of arguments. For arguments associated
+#with each command, use help command.
+#1. breakpointno: 0 to 3
+#2. length: 1 to 3
+#3. address: Memory location in hex ( without 0x ) e.g c015e9bc
+#
+#Use the command exinfo to find which hardware breakpoint occured.
+
+#hwebrk breakpointno address
+define hwebrk
+ maintenance packet Y$arg0,0,0,$arg1
+end
+document hwebrk
+ hwebrk <breakpointno> <address>
+ Places a hardware execution breakpoint
+ <breakpointno> = 0 - 3
+ <address> = Hex digits without leading "0x".
+end
+
+#hwwbrk breakpointno length address
+define hwwbrk
+ maintenance packet Y$arg0,1,$arg1,$arg2
+end
+document hwwbrk
+ hwwbrk <breakpointno> <length> <address>
+ Places a hardware write breakpoint
+ <breakpointno> = 0 - 3
+ <length> = 1 (1 byte), 2 (2 byte), 3 (4 byte)
+ <address> = Hex digits without leading "0x".
+end
+
+#hwabrk breakpointno length address
+define hwabrk
+ maintenance packet Y$arg0,1,$arg1,$arg2
+end
+document hwabrk
+ hwabrk <breakpointno> <length> <address>
+ Places a hardware access breakpoint
+ <breakpointno> = 0 - 3
+ <length> = 1 (1 byte), 2 (2 byte), 3 (4 byte)
+ <address> = Hex digits without leading "0x".
+end
+
+#hwrmbrk breakpointno
+define hwrmbrk
+ maintenance packet y$arg0
+end
+document hwrmbrk
+ hwrmbrk <breakpointno>
+ <breakpointno> = 0 - 3
+ Removes a hardware breakpoint
+end
+
+define reboot
+ maintenance packet r
+end
+#exinfo
+define exinfo
+ maintenance packet qE
+end
+document exinfo
+ exinfo
+ Gives information about a breakpoint.
+end
+define get_th
+ p $th=(struct thread_info *)((int)$esp & ~8191)
+end
+document get_th
+ get_tu
+ Gets and prints the current thread_info pointer, Defines th to be it.
+end
+define get_cu
+ p $cu=((struct thread_info *)((int)$esp & ~8191))->task
+end
+document get_cu
+ get_cu
+ Gets and print the "current" value. Defines $cu to be it.
+end
+define int_off
+ set var $flags=$eflags
+ set $eflags=$eflags&~0x200
+ end
+define int_on
+ set var $eflags|=$flags&0x200
+ end
+document int_off
+ saves the current interrupt state and clears the processor interrupt
+ flag. Use int_on to restore the saved flag.
+end
+document int_on
+ Restores the interrupt flag saved by int_off.
+end
--- diff/Documentation/i386/kgdb/kgdb.txt 1970-01-01 01:00:00.000000000 +0100
+++ source/Documentation/i386/kgdb/kgdb.txt 2004-10-04 22:35:21.000000000 +0100
@@ -0,0 +1,775 @@
+Last edit: <20030806.1637.12>
+This file has information specific to the i386 kgdb option. Other
+platforms with the kgdb option may behave in a similar fashion.
+
+New features:
+============
+20030806.1557.37
+This version was made against the 2.6.0-test2 kernel. We have made the
+following changes:
+
+- The getthread() code in the stub calls find_task_by_pid(). It fails
+ if we are early in the bring up such that the pid arrays have yet to
+ be allocated. We have added a line to kernel/pid.c to make
+ "kgdb_pid_init_done" true once the arrays are allocated. This way the
+ getthread() code knows not to call. This is only used by the thread
+ debugging stuff and threads will not yet exist at this point in the
+ boot.
+
+- For some reason, gdb was not asking for a new thread list when the
+ "info thread" command was given. We changed to the newer version of
+ the thread info command and gdb now seems to ask when needed. Result,
+ we now get all threads in the thread list.
+
+- We now respond to the ThreadExtraInfo request from gdb with the thread
+ name from task_struct .comm. This then appears in the thread list.
+ Thoughts on additional options for this are welcome. Things such as
+ "has BKL" and "Preempted" come to mind. I think we could have a flag
+ word that could enable different bits of info here.
+
+- We now honor, sort of, the C and S commands. These are continue and
+ single set after delivering a signal. We ignore the signal and do the
+ requested action. This only happens when we told gdb that a signal
+ was the reason for entry, which is only done on memory faults. The
+ result is that you can now continue into the Oops.
+
+- We changed the -g to -gdwarf-2. This seems to be the same as -ggdb,
+ but it is more exact on what language to use.
+
+- We added two dwarf2 include files and a bit of code at the end of
+ entry.S. This does not yet work, so it is disabled. Still we want to
+ keep track of the code and "maybe" someone out there can fix it.
+
+- Randy Dunlap sent some fix ups for this file which are now merged.
+
+- Hugh Dickins sent a fix to a bit of code in traps.c that prevents a
+ compiler warning if CONFIG_KGDB is off (now who would do that :).
+
+- Andrew Morton sent a fix for the serial driver which is now merged.
+
+- Andrew also sent a change to the stub around the cpu managment code
+ which is also merged.
+
+- Andrew also sent a patch to make "f" as well as "g" work as SysRq
+ commands to enter kgdb, merged.
+
+- If CONFIG_KGDB and CONFIG_DEBUG_SPINLOCKS are both set we added a
+ "who" field to the spinlock data struct. This is filled with
+ "current" when ever the spinlock suceeds. Useful if you want to know
+ who has the lock.
+
+_ And last, but not least, we fixed the "get_cu" macro to properly get
+ the current value of "current".
+
+New features:
+============
+20030505.1827.27
+We are starting to align with the sourceforge version, at least in
+commands. To this end, the boot command string to start kgdb at
+boot time has been changed from "kgdb" to "gdb".
+
+Andrew Morton sent a couple of patches which are now included as follows:
+1.) We now return a flag to the interrupt handler.
+2.) We no longer use smp_num_cpus (a conflict with the lock meter).
+3.) And from William Lee Irwin III <wli@holomorphy.com> code to make
+ sure high-mem is set up before we attempt to register our interrupt
+ handler.
+We now include asm/kgdb.h from config.h so you will most likely never
+have to include it. It also 'NULLS' the kgdb macros you might have in
+your code when CONFIG_KGDB is not defined. This allows you to just
+turn off CONFIG_KGDB to turn off all the kgdb_ts() calls and such.
+This include is conditioned on the machine being an x86 so as to not
+mess with other archs.
+
+20020801.1129.03
+This is currently the version for the 2.4.18 (and beyond?) kernel.
+
+We have several new "features" beginning with this version:
+
+1.) Kgdb now syncs the "other" CPUs with a cross-CPU NMI. No more
+ waiting and it will pull that guy out of an IRQ off spin lock :)
+
+2.) We doctored up the code that tells where a task is waiting and
+ included it so that the "info thread" command will show a bit more
+ than "schedule()". Try it...
+
+3.) Added the ability to call a function from gdb. All the standard gdb
+ issues apply, i.e. if you hit a breakpoint in the function, you are
+ not allowed to call another (gdb limitation, not kgdb). To help
+ this capability we added a memory allocation function. Gdb does not
+ return this memory (it is used for strings that you pass to that function
+ you are calling from gdb) so we fixed up a way to allow you to
+ manually return the memory (see below).
+
+4.) Kgdb time stamps (kgdb_ts()) are enhanced to expand what was the
+ interrupt flag to now also include the preemption count and the
+ "in_interrupt" info. The flag is now called "with_pif" to indicate
+ the order, preempt_count, in_interrupt, flag. The preempt_count is
+ shifted left by 4 bits so you can read the count in hex by dropping
+ the low order digit. In_interrupt is in bit 1, and the flag is in
+ bit 0.
+
+5.) The command: "p kgdb_info" is now expanded and prints something
+ like:
+(gdb) p kgdb_info
+$2 = {used_malloc = 0, called_from = 0xc0107506, entry_tsc = 67468627259,
+ errcode = 0, vector = 3, print_debug_info = 0, hold_on_sstep = 1,
+ cpus_waiting = {{task = 0xc027a000, pid = 32768, hold = 0,
+ regs = 0xc027bf84}, {task = 0x0, pid = 0, hold = 0, regs = 0x0}}}
+
+ Things to note here: a.) used_malloc is the amount of memory that
+ has been malloc'ed to do calls from gdb. You can reclaim this
+ memory like this: "p kgdb_info.used_malloc=0" Cool, huh? b.)
+ cpus_waiting is now "sized" by the number of CPUs you enter at
+ configure time in the kgdb configure section. This is NOT used
+ anywhere else in the system, but it is "nice" here. c.) The task's
+ "pid" is now in the structure. This is the pid you will need to use
+ to decode to the thread id to get gdb to look at that thread.
+ Remember that the "info thread" command prints a list of threads
+ wherein it numbers each thread with its reference number followed
+ by the thread's pid. Note that the per-CPU idle threads actually
+ have pids of 0 (yes, there is more than one pid 0 in an SMP system).
+ To avoid confusion, kgdb numbers these threads with numbers beyond
+ the MAX_PID. That is why you see 32768 and above.
+
+6.) A subtle change, we now provide the complete register set for tasks
+ that are active on the other CPUs. This allows better trace back on
+ those tasks.
+
+ And, let's mention what we could not fix. Back-trace from all but the
+ thread that we trapped will, most likely, have a bogus entry in it.
+ The problem is that gdb does not recognize the entry code for
+ functions that use "current" near (at all?) the entry. The compiler
+ is putting the "current" decode as the first two instructions of the
+ function where gdb expects to find %ebp changing code. Back trace
+ also has trouble with interrupt frames. I am talking with Daniel
+ Jacobowitz about some way to fix this, but don't hold your breath.
+
+20011220.0050.35
+Major enhancement with this version is the ability to hold one or more
+CPUs in an SMP system while allowing the others to continue. Also, by
+default only the current CPU is enabled on single-step commands (please
+note that gdb issues single-step commands at times other than when you
+use the si command).
+
+Another change is to collect some useful information in
+a global structure called "kgdb_info". You should be able to just:
+
+p kgdb_info
+
+although I have seen cases where the first time this is done gdb just
+prints the first member but prints the whole structure if you then enter
+CR (carriage return or enter). This also works:
+
+p *&kgdb_info
+
+Here is a sample:
+(gdb) p kgdb_info
+$4 = {called_from = 0xc010732c, entry_tsc = 32804123790856, errcode = 0,
+ vector = 3, print_debug_info = 0}
+
+"Called_from" is the return address from the current entry into kgdb.
+Sometimes it is useful to know why you are in kgdb, for example, was
+it an NMI or a real breakpoint? The simple way to interrogate this
+return address is:
+
+l *0xc010732c
+
+which will print the surrounding few lines of source code.
+
+"Entry_tsc" is the CPU TSC on entry to kgdb (useful to compare to the
+kgdb_ts entries).
+
+"errcode" and "vector" are other entry parameters which may be helpful on
+some traps.
+
+"print_debug_info" is the internal debugging kgdb print enable flag. Yes,
+you can modify it.
+
+In SMP systems kgdb_info also includes the "cpus_waiting" structure and
+"hold_on_step":
+
+(gdb) p kgdb_info
+$7 = {called_from = 0xc0112739, entry_tsc = 1034936624074, errcode = 0,
+ vector = 2, print_debug_info = 0, hold_on_sstep = 1, cpus_waiting = {{
+ task = 0x0, hold = 0, regs = 0x0}, {task = 0xc71b8000, hold = 0,
+ regs = 0xc71b9f70}, {task = 0x0, hold = 0, regs = 0x0}, {task = 0x0,
+ hold = 0, regs = 0x0}, {task = 0x0, hold = 0, regs = 0x0}, {task = 0x0,
+ hold = 0, regs = 0x0}, {task = 0x0, hold = 0, regs = 0x0}, {task = 0x0,
+ hold = 0, regs = 0x0}}}
+
+"Cpus_waiting" has an entry for each CPU other than the current one that
+has been stopped. Each entry contains the task_struct address for that
+CPU, the address of the regs for that task and a hold flag. All these
+have the proper typing so that, for example:
+
+p *kgdb_info.cpus_waiting[1].regs
+
+will print the registers for CPU 1.
+
+"Hold_on_sstep" is a new feature with this version and comes up set or
+true. What this means is that whenever kgdb is asked to single-step all
+other CPUs are held (i.e. not allowed to execute). The flag applies to
+all but the current CPU and, again, can be changed:
+
+p kgdb_info.hold_on_sstep=0
+
+restores the old behavior of letting all CPUs run during single-stepping.
+
+Likewise, each CPU has a "hold" flag, which if set, locks that CPU out
+of execution. Note that this has some risk in cases where the CPUs need
+to communicate with each other. If kgdb finds no CPU available on exit,
+it will push a message thru gdb and stay in kgdb. Note that it is legal
+to hold the current CPU as long as at least one CPU can execute.
+
+20010621.1117.09
+This version implements an event queue. Events are signaled by calling
+a function in the kgdb stub and may be examined from gdb. See EVENTS
+below for details. This version also tightens up the interrupt and SMP
+handling to not allow interrupts on the way to kgdb from a breakpoint
+trap. It is fine to allow these interrupts for user code, but not
+system debugging.
+
+Version
+=======
+
+This version of the kgdb package was developed and tested on
+kernel version 2.4.16. It will not install on any earlier kernels.
+It is possible that it will continue to work on later versions
+of 2.4 and then versions of 2.5 (I hope).
+
+
+Debugging Setup
+===============
+
+Designate one machine as the "development" machine. This is the
+machine on which you run your compiles and which has your source
+code for the kernel. Designate a second machine as the "target"
+machine. This is the machine that will run your experimental
+kernel.
+
+The two machines will be connected together via a serial line out
+one or the other of the COM ports of the PC. You will need the
+appropriate modem eliminator (null modem) cable(s) for this.
+
+Decide on which tty port you want the machines to communicate, then
+connect them up back-to-back using the null modem cable. COM1 is
+/dev/ttyS0 and COM2 is /dev/ttyS1. You should test this connection
+with the two machines prior to trying to debug a kernel. Once you
+have it working, on the TARGET machine, enter:
+
+setserial /dev/ttyS0 (or what ever tty you are using)
+
+and record the port address and the IRQ number.
+
+On the DEVELOPMENT machine you need to apply the patch for the kgdb
+hooks. You have probably already done that if you are reading this
+file.
+
+On your DEVELOPMENT machine, go to your kernel source directory and do
+"make Xconfig" where X is one of "x", "menu", or "". If you are
+configuring in the standard serial driver, it must not be a module.
+Either yes or no is ok, but making the serial driver a module means it
+will initialize after kgdb has set up the UART interrupt code and may
+cause a failure of the control-C option discussed below. The configure
+question for the serial driver is under the "Character devices" heading
+and is:
+
+"Standard/generic (8250/16550 and compatible UARTs) serial support"
+
+Go down to the kernel debugging menu item and open it up. Enable the
+kernel kgdb stub code by selecting that item. You can also choose to
+turn on the "-ggdb -O1" compile options. The -ggdb causes the compiler
+to put more debug info (like local symbols) in the object file. On the
+i386 -g and -ggdb are the same so this option just reduces to "O1". The
+-O1 reduces the optimization level. This may be helpful in some cases,
+be aware, however, that this may also mask the problem you are looking
+for.
+
+The baud rate. Default is 115200. What ever you choose be sure that
+the host machine is set to the same speed. I recommend the default.
+
+The port. This is the I/O address of the serial UART that you should
+have gotten using setserial as described above. The standard COM1 port
+(3f8) using IRQ 4 is default. COM2 is 2f8 which by convention uses IRQ
+3.
+
+The port IRQ (see above).
+
+Stack overflow test. This option makes a minor change in the trap,
+system call and interrupt code to detect stack overflow and transfer
+control to kgdb if it happens. (Some platforms have this in the
+baseline code, but the i386 does not.)
+
+You can also configure the system to recognize the boot option
+"console=kgdb" which if given will cause all console output during
+booting to be put thru gdb as well as other consoles. This option
+requires that gdb and kgdb be connected prior to sending console output
+so, if they are not, a breakpoint is executed to force the connection.
+This will happen before any kernel output (it is going thru gdb, right),
+and will stall the boot until the connection is made.
+
+You can also configure in a patch to SysRq to enable the kGdb SysRq.
+This request generates a breakpoint. Since the serial port IRQ line is
+set up after any serial drivers, it is possible that this command will
+work when the control-C will not.
+
+Save and exit the Xconfig program. Then do "make clean" , "make dep"
+and "make bzImage" (or whatever target you want to make). This gets the
+kernel compiled with the "-g" option set -- necessary for debugging.
+
+You have just built the kernel on your DEVELOPMENT machine that you
+intend to run on your TARGET machine.
+
+To install this new kernel, use the following installation procedure.
+Remember, you are on the DEVELOPMENT machine patching the kernel source
+for the kernel that you intend to run on the TARGET machine.
+
+Copy this kernel to your target machine using your usual procedures. I
+usually arrange to copy development:
+/usr/src/linux/arch/i386/boot/bzImage to /vmlinuz on the TARGET machine
+via a LAN based NFS access. That is, I run the cp command on the target
+and copy from the development machine via the LAN. Run Lilo (see "man
+lilo" for details on how to set this up) on the new kernel on the target
+machine so that it will boot! Then boot the kernel on the target
+machine.
+
+On the DEVELOPMENT machine, create a file called .gdbinit in the
+directory /usr/src/linux. An example .gdbinit file looks like this:
+
+shell echo -e "\003" >/dev/ttyS0
+set remotebaud 38400 (or what ever speed you have chosen)
+target remote /dev/ttyS0
+
+
+Change the "echo" and "target" definition so that it specifies the tty
+port that you intend to use. Change the "remotebaud" definition to
+match the data rate that you are going to use for the com line.
+
+You are now ready to try it out.
+
+Boot your target machine with "kgdb" in the boot command i.e. something
+like:
+
+lilo> test kgdb
+
+or if you also want console output thru gdb:
+
+lilo> test kgdb console=kgdb
+
+You should see the lilo message saying it has loaded the kernel and then
+all output stops. The kgdb stub is trying to connect with gdb. Start
+gdb something like this:
+
+
+On your DEVELOPMENT machine, cd /usr/src/linux and enter "gdb vmlinux".
+When gdb gets the symbols loaded it will read your .gdbinit file and, if
+everything is working correctly, you should see gdb print out a few
+lines indicating that a breakpoint has been taken. It will actually
+show a line of code in the target kernel inside the kgdb activation
+code.
+
+The gdb interaction should look something like this:
+
+ linux-dev:/usr/src/linux# gdb vmlinux
+ GDB is free software and you are welcome to distribute copies of it
+ under certain conditions; type "show copying" to see the conditions.
+ There is absolutely no warranty for GDB; type "show warranty" for details.
+ GDB 4.15.1 (i486-slackware-linux),
+ Copyright 1995 Free Software Foundation, Inc...
+ breakpoint () at i386-stub.c:750
+ 750 }
+ (gdb)
+
+You can now use whatever gdb commands you like to set breakpoints.
+Enter "continue" to start your target machine executing again. At this
+point the target system will run at full speed until it encounters
+your breakpoint or gets a segment violation in the kernel, or whatever.
+
+If you have the kgdb console enabled when you continue, gdb will print
+out all the console messages.
+
+The above example caused a breakpoint relatively early in the boot
+process. For the i386 kgdb it is possible to code a break instruction
+as the first C-language point in init/main.c, i.e. as the first instruction
+in start_kernel(). This could be done as follows:
+
+#include <asm/kgdb.h>
+ breakpoint();
+
+This breakpoint() is really a function that sets up the breakpoint and
+single-step hardware trap cells and then executes a breakpoint. Any
+early hard coded breakpoint will need to use this function. Once the
+trap cells are set up they need not be set again, but doing it again
+does not hurt anything, so you don't need to be concerned about which
+breakpoint is hit first. Once the trap cells are set up (and the kernel
+sets them up in due course even if breakpoint() is never called) the
+macro:
+
+BREAKPOINT;
+
+will generate an inline breakpoint. This may be more useful as it stops
+the processor at the instruction instead of in a function a step removed
+from the location of interest. In either case <asm/kgdb.h> must be
+included to define both breakpoint() and BREAKPOINT.
+
+Triggering kgdbstub at other times
+==================================
+
+Often you don't need to enter the debugger until much later in the boot
+or even after the machine has been running for some time. Once the
+kernel is booted and interrupts are on, you can force the system to
+enter the debugger by sending a control-C to the debug port. This is
+what the first line of the recommended .gdbinit file does. This allows
+you to start gdb any time after the system is up as well as when the
+system is already at a breakpoint. (In the case where the system is
+already at a breakpoint the control-C is not needed, however, it will
+be ignored by the target so no harm is done. Also note the the echo
+command assumes that the port speed is already set. This will be true
+once gdb has connected, but it is best to set the port speed before you
+run gdb.)
+
+Another simple way to do this is to put the following file in you ~/bin
+directory:
+
+#!/bin/bash
+echo -e "\003" > /dev/ttyS0
+
+Here, the ttyS0 should be replaced with what ever port you are using.
+The "\003" is control-C. Once you are connected with gdb, you can enter
+control-C at the command prompt.
+
+An alternative way to get control to the debugger is to enable the kGdb
+SysRq command. Then you would enter Alt-SysRq-g (all three keys at the
+same time, but push them down in the order given). To refresh your
+memory of the available SysRq commands try Alt-SysRq-=. Actually any
+undefined command could replace the "=", but I like to KNOW that what I
+am pushing will never be defined.
+
+Debugging hints
+===============
+
+You can break into the target machine at any time from the development
+machine by typing ^C (see above paragraph). If the target machine has
+interrupts enabled this will stop it in the kernel and enter the
+debugger.
+
+There is unfortunately no way of breaking into the kernel if it is
+in a loop with interrupts disabled, so if this happens to you then
+you need to place exploratory breakpoints or printk's into the kernel
+to find out where it is looping. The exploratory breakpoints can be
+entered either thru gdb or hard coded into the source. This is very
+handy if you do something like:
+
+if (<it hurts>) BREAKPOINT;
+
+
+There is a copy of an e-mail in the Documentation/i386/kgdb/ directory
+(debug-nmi.txt) which describes how to create an NMI on an ISA bus
+machine using a paper clip. I have a sophisticated version of this made
+by wiring a push button switch into a PC104/ISA bus adapter card. The
+adapter card nicely furnishes wire wrap pins for all the ISA bus
+signals.
+
+When you are done debugging the kernel on the target machine it is a
+good idea to leave it in a running state. This makes reboots faster,
+bypassing the fsck. So do a gdb "continue" as the last gdb command if
+this is possible. To terminate gdb itself on the development machine
+and leave the target machine running, first clear all breakpoints and
+continue, then type ^Z to suspend gdb and then kill it with "kill %1" or
+something similar.
+
+If gdbstub Does Not Work
+========================
+
+If it doesn't work, you will have to troubleshoot it. Do the easy
+things first like double checking your cabling and data rates. You
+might try some non-kernel based programs to see if the back-to-back
+connection works properly. Just something simple like cat /etc/hosts
+>/dev/ttyS0 on one machine and cat /dev/ttyS0 on the other will tell you
+if you can send data from one machine to the other. Make sure it works
+in both directions. There is no point in tearing out your hair in the
+kernel if the line doesn't work.
+
+All of the real action takes place in the file
+/usr/src/linux/arch/i386/kernel/kgdb_stub.c. That is the code on the target
+machine that interacts with gdb on the development machine. In gdb you can
+turn on a debug switch with the following command:
+
+ set remotedebug
+
+This will print out the protocol messages that gdb is exchanging with
+the target machine.
+
+Another place to look is /usr/src/arch/i386/lib/kgdb_serial.c. This is
+the code that talks to the serial port on the target side. There might
+be a problem there. In particular there is a section of this code that
+tests the UART which will tell you what UART you have if you define
+"PRNT" (just remove "_off" from the #define PRNT_off). To view this
+report you will need to boot the system without any beakpoints. This
+allows the kernel to run to the point where it calls kgdb to set up
+interrupts. At this time kgdb will test the UART and print out the type
+it finds. (You need to wait so that the printks are actually being
+printed. Early in the boot they are cached, waiting for the console to
+be enabled. Also, if kgdb is entered thru a breakpoint it is possible
+to cause a dead lock by calling printk when the console is locked. The
+stub thus avoids doing printks from breakpoints, especially in the
+serial code.) At this time, if the UART fails to do the expected thing,
+kgdb will print out (using printk) information on what failed. (These
+messages will be buried in all the other boot up messages. Look for
+lines that start with "gdb_hook_interrupt:". You may want to use dmesg
+once the system is up to view the log. If this fails or if you still
+don't connect, review your answers for the port address. Use:
+
+setserial /dev/ttyS0
+
+to get the current port and IRQ information. This command will also
+tell you what the system found for the UART type. The stub recognizes
+the following UART types:
+
+16450, 16550, and 16550A
+
+If you are really desperate you can use printk debugging in the
+kgdbstub code in the target kernel until you get it working. In particular,
+there is a global variable in /usr/src/linux/arch/i386/kernel/kgdb_stub.c
+named "remote_debug". Compile your kernel with this set to 1, rather
+than 0 and the debug stub will print out lots of stuff as it does
+what it does. Likewise there are debug printks in the kgdb_serial.c
+code that can be turned on with simple changes in the macro defines.
+
+
+Debugging Loadable Modules
+==========================
+
+This technique comes courtesy of Edouard Parmelan
+<Edouard.Parmelan@quadratec.fr>
+
+When you run gdb, enter the command
+
+source gdbinit-modules
+
+This will read in a file of gdb macros that was installed in your
+kernel source directory when kgdb was installed. This file implements
+the following commands:
+
+mod-list
+ Lists the loaded modules in the form <module-address> <module-name>
+
+mod-print-symbols <module-address>
+ Prints all the symbols in the indicated module.
+
+mod-add-symbols <module-address> <object-file-path-name>
+ Loads the symbols from the object file and associates them
+ with the indicated module.
+
+After you have loaded the module that you want to debug, use the command
+mod-list to find the <module-address> of your module. Then use that
+address in the mod-add-symbols command to load your module's symbols.
+From that point onward you can debug your module as if it were a part
+of the kernel.
+
+The file gdbinit-modules also contains a command named mod-add-lis as
+an example of how to construct a command of your own to load your
+favorite module. The idea is to "can" the pathname of the module
+in the command so you don't have to type so much.
+
+Threads
+=======
+
+Each process in a target machine is seen as a gdb thread. gdb thread
+related commands (info threads, thread n) can be used.
+
+ia-32 hardware breakpoints
+==========================
+
+kgdb stub contains support for hardware breakpoints using debugging features
+of ia-32(x86) processors. These breakpoints do not need code modification.
+They use debugging registers. 4 hardware breakpoints are available in ia-32
+processors.
+
+Each hardware breakpoint can be of one of the following three types.
+
+1. Execution breakpoint - An Execution breakpoint is triggered when code
+ at the breakpoint address is executed.
+
+ As limited number of hardware breakpoints are available, it is
+ advisable to use software breakpoints ( break command ) instead
+ of execution hardware breakpoints, unless modification of code
+ is to be avoided.
+
+2. Write breakpoint - A write breakpoint is triggered when memory
+ location at the breakpoint address is written.
+
+ A write or can be placed for data of variable length. Length of
+ a write breakpoint indicates length of the datatype to be
+ watched. Length is 1 for 1 byte data , 2 for 2 byte data, 3 for
+ 4 byte data.
+
+3. Access breakpoint - An access breakpoint is triggered when memory
+ location at the breakpoint address is either read or written.
+
+ Access breakpoints also have lengths similar to write breakpoints.
+
+IO breakpoints in ia-32 are not supported.
+
+Since gdb stub at present does not use the protocol used by gdb for hardware
+breakpoints, hardware breakpoints are accessed through gdb macros. gdb macros
+for hardware breakpoints are described below.
+
+hwebrk - Places an execution breakpoint
+ hwebrk breakpointno address
+hwwbrk - Places a write breakpoint
+ hwwbrk breakpointno length address
+hwabrk - Places an access breakpoint
+ hwabrk breakpointno length address
+hwrmbrk - Removes a breakpoint
+ hwrmbrk breakpointno
+exinfo - Tells whether a software or hardware breakpoint has occurred.
+ Prints number of the hardware breakpoint if a hardware breakpoint has
+ occurred.
+
+Arguments required by these commands are as follows
+breakpointno - 0 to 3
+length - 1 to 3
+address - Memory location in hex digits ( without 0x ) e.g c015e9bc
+
+SMP support
+==========
+
+When a breakpoint occurs or user issues a break ( Ctrl + C ) to gdb
+client, all the processors are forced to enter the debugger. Current
+thread corresponds to the thread running on the processor where
+breakpoint occurred. Threads running on other processor(s) appear
+similar to other non-running threads in the 'info threads' output.
+Within the kgdb stub there is a structure "waiting_cpus" in which kgdb
+records the values of "current" and "regs" for each CPU other than the
+one that hit the breakpoint. "current" is a pointer to the task
+structure for the task that CPU is running, while "regs" points to the
+saved registers for the task. This structure can be examined with the
+gdb "p" command.
+
+ia-32 hardware debugging registers on all processors are set to same
+values. Hence any hardware breakpoints may occur on any processor.
+
+gdb troubleshooting
+===================
+
+1. gdb hangs
+Kill it. restart gdb. Connect to target machine.
+
+2. gdb cannot connect to target machine (after killing a gdb and
+restarting another) If the target machine was not inside debugger when
+you killed gdb, gdb cannot connect because the target machine won't
+respond. In this case echo "Ctrl+C"(ASCII 3) to the serial line.
+e.g. echo -e "\003" > /dev/ttyS1
+This forces that target machine into the debugger, after which you
+can connect.
+
+3. gdb cannot connect even after echoing Ctrl+C into serial line
+Try changing serial line settings min to 1 and time to 0
+e.g. stty min 1 time 0 < /dev/ttyS1
+Try echoing again
+
+Check serial line speed and set it to correct value if required
+e.g. stty ispeed 115200 ospeed 115200 < /dev/ttyS1
+
+EVENTS
+======
+
+Ever want to know the order of things happening? Which CPU did what and
+when? How did the spinlock get the way it is? Then events are for
+you. Events are defined by calls to an event collection interface and
+saved for later examination. In this case, kgdb events are saved by a
+very fast bit of code in kgdb which is fully SMP and interrupt protected
+and they are examined by using gdb to display them. Kgdb keeps only
+the last N events, where N must be a power of two and is defined at
+configure time.
+
+
+Events are signaled to kgdb by calling:
+
+kgdb_ts(data0,data1)
+
+For each call kgdb records each call in an array along with other info.
+Here is the array definition:
+
+struct kgdb_and_then_struct {
+#ifdef CONFIG_SMP
+ int on_cpu;
+#endif
+ long long at_time;
+ int from_ln;
+ char * in_src;
+ void *from;
+ int with_if;
+ int data0;
+ int data1;
+};
+
+For SMP machines the CPU is recorded, for all machines the TSC is
+recorded (gets a time stamp) as well as the line number and source file
+the call was made from. The address of the (from), the "if" (interrupt
+flag) and the two data items are also recorded. The macro kgdb_ts casts
+the types to int, so you can put any 32-bit values here. There is a
+configure option to select the number of events you want to keep. A
+nice number might be 128, but you can keep up to 1024 if you want. The
+number must be a power of two. An "andthen" macro library is provided
+for gdb to help you look at these events. It is also possible to define
+a different structure for the event storage and cast the data to this
+structure. For example the following structure is defined in kgdb:
+
+struct kgdb_and_then_struct2 {
+#ifdef CONFIG_SMP
+ int on_cpu;
+#endif
+ long long at_time;
+ int from_ln;
+ char * in_src;
+ void *from;
+ int with_if;
+ struct task_struct *t1;
+ struct task_struct *t2;
+};
+
+If you use this for display, the data elements will be displayed as
+pointers to task_struct entries. You may want to define your own
+structure to use in casting. You should only change the last two items
+and you must keep the structure size the same. Kgdb will handle these
+as 32-bit ints, but within that constraint you can define a structure to
+cast to any 32-bit quantity. This need only be available to gdb and is
+only used for casting in the display code.
+
+Final Items
+===========
+
+I picked up this code from Amit S. Kale and enhanced it.
+
+If you make some really cool modification to this stuff, or if you
+fix a bug, please let me know.
+
+George Anzinger
+<george@mvista.com>
+
+Amit S. Kale
+<akale@veritas.com>
+
+(First kgdb by David Grothe <dave@gcom.com>)
+
+(modified by Tigran Aivazian <tigran@sco.com>)
+ Putting gdbstub into the kernel config menu.
+
+(modified by Scott Foehner <sfoehner@engr.sgi.com>)
+ Hooks for entering gdbstub at boot time.
+
+(modified by Amit S. Kale <akale@veritas.com>)
+ Threads, ia-32 hw debugging, mp support, console support,
+ nmi watchdog handling.
+
+(modified by George Anzinger <george@mvista.com>)
+ Extended threads to include the idle threads.
+ Enhancements to allow breakpoint() at first C code.
+ Use of module_init() and __setup() to automate the configure.
+ Enhanced the cpu "collection" code to work in early bring-up.
+ Added ability to call functions from gdb
+ Print info thread stuff without going back to schedule()
+ Now collect the "other" cpus with an IPI/ NMI.
--- diff/Documentation/i386/kgdb/loadmodule.sh 1970-01-01 01:00:00.000000000 +0100
+++ source/Documentation/i386/kgdb/loadmodule.sh 2004-10-04 22:35:21.000000000 +0100
@@ -0,0 +1,78 @@
+#/bin/sh
+# This script loads a module on a target machine and generates a gdb script.
+# source generated gdb script to load the module file at appropriate addresses
+# in gdb.
+#
+# Usage:
+# Loading the module on target machine and generating gdb script)
+# [foo]$ loadmodule.sh <modulename>
+#
+# Loading the module file into gdb
+# (gdb) source <gdbscriptpath>
+#
+# Modify following variables according to your setup.
+# TESTMACHINE - Name of the target machine
+# GDBSCRIPTS - The directory where a gdb script will be generated
+#
+# Author: Amit S. Kale (akale@veritas.com).
+#
+# If you run into problems, please check files pointed to by following
+# variables.
+# ERRFILE - /tmp/<modulename>.errs contains stderr output of insmod
+# MAPFILE - /tmp/<modulename>.map contains stdout output of insmod
+# GDBSCRIPT - $GDBSCRIPTS/load<modulename> gdb script.
+
+TESTMACHINE=foo
+GDBSCRIPTS=/home/bar
+
+if [ $# -lt 1 ] ; then {
+ echo Usage: $0 modulefile
+ exit
+} ; fi
+
+MODULEFILE=$1
+MODULEFILEBASENAME=`basename $1`
+
+if [ $MODULEFILE = $MODULEFILEBASENAME ] ; then {
+ MODULEFILE=`pwd`/$MODULEFILE
+} fi
+
+ERRFILE=/tmp/$MODULEFILEBASENAME.errs
+MAPFILE=/tmp/$MODULEFILEBASENAME.map
+GDBSCRIPT=$GDBSCRIPTS/load$MODULEFILEBASENAME
+
+function findaddr() {
+ local ADDR=0x$(echo "$SEGMENTS" | \
+ grep "$1" | sed 's/^[^ ]*[ ]*[^ ]*[ ]*//' | \
+ sed 's/[ ]*[^ ]*$//')
+ echo $ADDR
+}
+
+function checkerrs() {
+ if [ "`cat $ERRFILE`" != "" ] ; then {
+ cat $ERRFILE
+ exit
+ } fi
+}
+
+#load the module
+echo Copying $MODULEFILE to $TESTMACHINE
+rcp $MODULEFILE root@${TESTMACHINE}:
+
+echo Loading module $MODULEFILE
+rsh -l root $TESTMACHINE /sbin/insmod -m ./`basename $MODULEFILE` \
+ > $MAPFILE 2> $ERRFILE
+checkerrs
+
+SEGMENTS=`head -n 11 $MAPFILE | tail -n 10`
+TEXTADDR=$(findaddr "\\.text[^.]")
+LOADSTRING="add-symbol-file $MODULEFILE $TEXTADDR"
+SEGADDRS=`echo "$SEGMENTS" | awk '//{
+ if ($1 != ".text" && $1 != ".this" &&
+ $1 != ".kstrtab" && $1 != ".kmodtab") {
+ print " -s " $1 " 0x" $3 " "
+ }
+}'`
+LOADSTRING="$LOADSTRING $SEGADDRS"
+echo Generating script $GDBSCRIPT
+echo $LOADSTRING > $GDBSCRIPT
--- diff/arch/i386/Kconfig.kgdb 1970-01-01 01:00:00.000000000 +0100
+++ source/arch/i386/Kconfig.kgdb 2004-10-04 22:35:21.000000000 +0100
@@ -0,0 +1,175 @@
+config KGDB
+ bool "Include kgdb kernel debugger"
+ depends on DEBUG_KERNEL && !KPROBES
+ help
+ If you say Y here, the system will be compiled with the debug
+ option (-g) and a debugging stub will be included in the
+ kernel. This stub communicates with gdb on another (host)
+ computer via a serial port. The host computer should have
+ access to the kernel binary file (vmlinux) and a serial port
+ that is connected to the target machine. Gdb can be made to
+ configure the serial port or you can use stty and setserial to
+ do this. See the 'target' command in gdb. This option also
+ configures in the ability to request a breakpoint early in the
+ boot process. To request the breakpoint just include 'kgdb'
+ as a boot option when booting the target machine. The system
+ will then break as soon as it looks at the boot options. This
+ option also installs a breakpoint in panic and sends any
+ kernel faults to the debugger. For more information see the
+ Documentation/i386/kgdb/kgdb.txt file.
+
+choice
+ depends on KGDB
+ prompt "Debug serial port BAUD"
+ default KGDB_115200BAUD
+ help
+ Gdb and the kernel stub need to agree on the baud rate to be
+ used. Some systems (x86 family at this writing) allow this to
+ be configured.
+
+config KGDB_9600BAUD
+ bool "9600"
+
+config KGDB_19200BAUD
+ bool "19200"
+
+config KGDB_38400BAUD
+ bool "38400"
+
+config KGDB_57600BAUD
+ bool "57600"
+
+config KGDB_115200BAUD
+ bool "115200"
+endchoice
+
+config KGDB_PORT
+ hex "hex I/O port address of the debug serial port"
+ depends on KGDB
+ default 3f8
+ help
+ Some systems (x86 family at this writing) allow the port
+ address to be configured. The number entered is assumed to be
+ hex, don't put 0x in front of it. The standard address are:
+ COM1 3f8 , irq 4 and COM2 2f8 irq 3. Setserial /dev/ttySx
+ will tell you what you have. It is good to test the serial
+ connection with a live system before trying to debug.
+
+config KGDB_IRQ
+ int "IRQ of the debug serial port"
+ depends on KGDB
+ default 4
+ help
+ This is the irq for the debug port. If everything is working
+ correctly and the kernel has interrupts on a control C to the
+ port should cause a break into the kernel debug stub.
+
+config DEBUG_INFO
+ bool
+ depends on KGDB
+ default y
+
+config KGDB_MORE
+ bool "Add any additional compile options"
+ depends on KGDB
+ default n
+ help
+ Saying yes here turns on the ability to enter additional
+ compile options.
+
+
+config KGDB_OPTIONS
+ depends on KGDB_MORE
+ string "Additional compile arguments"
+ default "-O1"
+ help
+ This option allows you enter additional compile options for
+ the whole kernel compile. Each platform will have a default
+ that seems right for it. For example on PPC "-ggdb -O1", and
+ for i386 "-O1". Note that by configuring KGDB "-g" is already
+ turned on. In addition, on i386 platforms
+ "-fomit-frame-pointer" is deleted from the standard compile
+ options.
+
+config NO_KGDB_CPUS
+ int "Number of CPUs"
+ depends on KGDB && SMP
+ default NR_CPUS
+ help
+
+ This option sets the number of cpus for kgdb ONLY. It is used
+ to prune some internal structures so they look "nice" when
+ displayed with gdb. This is to overcome possibly larger
+ numbers that may have been entered above. Enter the real
+ number to get nice clean kgdb_info displays.
+
+config KGDB_TS
+ bool "Enable kgdb time stamp macros?"
+ depends on KGDB
+ default n
+ help
+ Kgdb event macros allow you to instrument your code with calls
+ to the kgdb event recording function. The event log may be
+ examined with gdb at a break point. Turning on this
+ capability also allows you to choose how many events to
+ keep. Kgdb always keeps the lastest events.
+
+choice
+ depends on KGDB_TS
+ prompt "Max number of time stamps to save?"
+ default KGDB_TS_128
+
+config KGDB_TS_64
+ bool "64"
+
+config KGDB_TS_128
+ bool "128"
+
+config KGDB_TS_256
+ bool "256"
+
+config KGDB_TS_512
+ bool "512"
+
+config KGDB_TS_1024
+ bool "1024"
+
+endchoice
+
+config STACK_OVERFLOW_TEST
+ bool "Turn on kernel stack overflow testing?"
+ depends on KGDB
+ default n
+ help
+ This option enables code in the front line interrupt handlers
+ to check for kernel stack overflow on interrupts and system
+ calls. This is part of the kgdb code on x86 systems.
+
+config KGDB_CONSOLE
+ bool "Enable serial console thru kgdb port"
+ depends on KGDB
+ default n
+ help
+ This option enables the command line "console=kgdb" option.
+ When the system is booted with this option in the command line
+ all kernel printk output is sent to gdb (as well as to other
+ consoles). For this to work gdb must be connected. For this
+ reason, this command line option will generate a breakpoint if
+ gdb has not yet connected. After the gdb continue command is
+ given all pent up console output will be printed by gdb on the
+ host machine. Neither this option, nor KGDB require the
+ serial driver to be configured.
+
+config KGDB_SYSRQ
+ bool "Turn on SysRq 'G' command to do a break?"
+ depends on KGDB
+ default y
+ help
+ This option includes an option in the SysRq code that allows
+ you to enter SysRq G which generates a breakpoint to the KGDB
+ stub. This will work if the keyboard is alive and can
+ interrupt the system. Because of constraints on when the
+ serial port interrupt can be enabled, this code may allow you
+ to interrupt the system before the serial port control C is
+ available. Just say yes here.
+
--- diff/arch/i386/kernel/kgdb_stub.c 1970-01-01 01:00:00.000000000 +0100
+++ source/arch/i386/kernel/kgdb_stub.c 2004-10-04 22:35:21.000000000 +0100
@@ -0,0 +1,2330 @@
+/*
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+/*
+ * Copyright (c) 2000 VERITAS Software Corporation.
+ *
+ */
+/****************************************************************************
+ * Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
+ *
+ * Module name: remcom.c $
+ * Revision: 1.34 $
+ * Date: 91/03/09 12:29:49 $
+ * Contributor: Lake Stevens Instrument Division$
+ *
+ * Description: low level support for gdb debugger. $
+ *
+ * Considerations: only works on target hardware $
+ *
+ * Written by: Glenn Engel $
+ * Updated by: David Grothe <dave@gcom.com>
+ * ModuleState: Experimental $
+ *
+ * NOTES: See Below $
+ *
+ * Modified for 386 by Jim Kingdon, Cygnus Support.
+ * Compatibility with 2.1.xx kernel by David Grothe <dave@gcom.com>
+ *
+ * Changes to allow auto initilization. All that is needed is that it
+ * be linked with the kernel and a break point (int 3) be executed.
+ * The header file <asm/kgdb.h> defines BREAKPOINT to allow one to do
+ * this. It should also be possible, once the interrupt system is up, to
+ * call putDebugChar("+"). Once this is done, the remote debugger should
+ * get our attention by sending a ^C in a packet. George Anzinger
+ * <george@mvista.com>
+ * Integrated into 2.2.5 kernel by Tigran Aivazian <tigran@sco.com>
+ * Added thread support, support for multiple processors,
+ * support for ia-32(x86) hardware debugging.
+ * Amit S. Kale ( akale@veritas.com )
+ *
+ *
+ * To enable debugger support, two things need to happen. One, a
+ * call to set_debug_traps() is necessary in order to allow any breakpoints
+ * or error conditions to be properly intercepted and reported to gdb.
+ * Two, a breakpoint needs to be generated to begin communication. This
+ * is most easily accomplished by a call to breakpoint(). Breakpoint()
+ * simulates a breakpoint by executing an int 3.
+ *
+ *************
+ *
+ * The following gdb commands are supported:
+ *
+ * command function Return value
+ *
+ * g return the value of the CPU registers hex data or ENN
+ * G set the value of the CPU registers OK or ENN
+ *
+ * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
+ * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
+ *
+ * c Resume at current address SNN ( signal NN)
+ * cAA..AA Continue at address AA..AA SNN
+ *
+ * s Step one instruction SNN
+ * sAA..AA Step one instruction from AA..AA SNN
+ *
+ * k kill
+ *
+ * ? What was the last sigval ? SNN (signal NN)
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum. A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer. '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host: Reply:
+ * $m0,10#2a +$00010203040506070809101112131415#42
+ *
+ ****************************************************************************/
+#define KGDB_VERSION "<20030915.1651.33>"
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/string.h> /* for strcpy */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/vm86.h>
+#include <asm/system.h>
+#include <asm/ptrace.h> /* for linux pt_regs struct */
+#include <asm/kgdb_local.h>
+#include <linux/list.h>
+#include <asm/atomic.h>
+#include <asm/processor.h>
+#include <linux/irq.h>
+#include <asm/desc.h>
+
+/************************************************************************
+ *
+ * external low-level support routines
+ */
+typedef void (*Function) (void); /* pointer to a function */
+
+/* Thread reference */
+typedef unsigned char threadref[8];
+
+extern void putDebugChar(int); /* write a single character */
+extern int getDebugChar(void); /* read and return a single char */
+
+/************************************************************************/
+/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
+/* at least NUMREGBYTES*2 are needed for register packets */
+/* Longer buffer is needed to list all threads */
+#define BUFMAX 400
+
+char *kgdb_version = KGDB_VERSION;
+
+/* debug > 0 prints ill-formed commands in valid packets & checksum errors */
+int debug_regs = 0; /* set to non-zero to print registers */
+
+/* filled in by an external module */
+char *gdb_module_offsets;
+
+static const char hexchars[] = "0123456789abcdef";
+
+/* Number of bytes of registers. */
+#define NUMREGBYTES 64
+/*
+ * Note that this register image is in a different order than
+ * the register image that Linux produces at interrupt time.
+ *
+ * Linux's register image is defined by struct pt_regs in ptrace.h.
+ * Just why GDB uses a different order is a historical mystery.
+ */
+enum regnames { _EAX, /* 0 */
+ _ECX, /* 1 */
+ _EDX, /* 2 */
+ _EBX, /* 3 */
+ _ESP, /* 4 */
+ _EBP, /* 5 */
+ _ESI, /* 6 */
+ _EDI, /* 7 */
+ _PC /* 8 also known as eip */ ,
+ _PS /* 9 also known as eflags */ ,
+ _CS, /* 10 */
+ _SS, /* 11 */
+ _DS, /* 12 */
+ _ES, /* 13 */
+ _FS, /* 14 */
+ _GS /* 15 */
+};
+
+/*************************** ASSEMBLY CODE MACROS *************************/
+/*
+ * Put the error code here just in case the user cares.
+ * Likewise, the vector number here (since GDB only gets the signal
+ * number through the usual means, and that's not very specific).
+ * The called_from is the return address so he can tell how we entered kgdb.
+ * This will allow him to seperate out the various possible entries.
+ */
+#define REMOTE_DEBUG 0 /* set != to turn on printing (also available in info) */
+
+#define PID_MAX PID_MAX_DEFAULT
+
+#ifdef CONFIG_SMP
+void smp_send_nmi_allbutself(void);
+#define IF_SMP(x) x
+#undef MAX_NO_CPUS
+#ifndef CONFIG_NO_KGDB_CPUS
+#define CONFIG_NO_KGDB_CPUS 2
+#endif
+#if CONFIG_NO_KGDB_CPUS > NR_CPUS
+#define MAX_NO_CPUS NR_CPUS
+#else
+#define MAX_NO_CPUS CONFIG_NO_KGDB_CPUS
+#endif
+#define hold_init hold_on_sstep: 1,
+#define MAX_CPU_MASK (unsigned long)((1LL << MAX_NO_CPUS) - 1LL)
+#define NUM_CPUS num_online_cpus()
+#else
+#define IF_SMP(x)
+#define hold_init
+#undef MAX_NO_CPUS
+#define MAX_NO_CPUS 1
+#define NUM_CPUS 1
+#endif
+#define NOCPU (struct task_struct *)0xbad1fbad
+/* *INDENT-OFF* */
+struct kgdb_info {
+ int used_malloc;
+ void *called_from;
+ long long entry_tsc;
+ int errcode;
+ int vector;
+ int print_debug_info;
+#ifdef CONFIG_SMP
+ int hold_on_sstep;
+ struct {
+ volatile struct task_struct *task;
+ int pid;
+ int hold;
+ struct pt_regs *regs;
+ } cpus_waiting[MAX_NO_CPUS];
+#endif
+} kgdb_info = {hold_init print_debug_info:REMOTE_DEBUG, vector:-1};
+
+/* *INDENT-ON* */
+
+#define used_m kgdb_info.used_malloc
+/*
+ * This is little area we set aside to contain the stack we
+ * need to build to allow gdb to call functions. We use one
+ * per cpu to avoid locking issues. We will do all this work
+ * with interrupts off so that should take care of the protection
+ * issues.
+ */
+#define LOOKASIDE_SIZE 200 /* should be more than enough */
+#define MALLOC_MAX 200 /* Max malloc size */
+struct {
+ unsigned int esp;
+ int array[LOOKASIDE_SIZE];
+} fn_call_lookaside[MAX_NO_CPUS];
+
+static int trap_cpu;
+static unsigned int OLD_esp;
+
+#define END_OF_LOOKASIDE &fn_call_lookaside[trap_cpu].array[LOOKASIDE_SIZE]
+#define IF_BIT 0x200
+#define TF_BIT 0x100
+
+#define MALLOC_ROUND 8-1
+
+static char malloc_array[MALLOC_MAX];
+IF_SMP(static void to_gdb(const char *mess));
+void *
+malloc(int size)
+{
+
+ if (size <= (MALLOC_MAX - used_m)) {
+ int old_used = used_m;
+ used_m += ((size + MALLOC_ROUND) & (~MALLOC_ROUND));
+ return &malloc_array[old_used];
+ } else {
+ return NULL;
+ }
+}
+
+/*
+ * Gdb calls functions by pushing agruments, including a return address
+ * on the stack and the adjusting EIP to point to the function. The
+ * whole assumption in GDB is that we are on a different stack than the
+ * one the "user" i.e. code that hit the break point, is on. This, of
+ * course is not true in the kernel. Thus various dodges are needed to
+ * do the call without directly messing with EIP (which we can not change
+ * as it is just a location and not a register. To adjust it would then
+ * require that we move every thing below EIP up or down as needed. This
+ * will not work as we may well have stack relative pointer on the stack
+ * (such as the pointer to regs, for example).
+
+ * So here is what we do:
+ * We detect gdb attempting to store into the stack area and instead, store
+ * into the fn_call_lookaside.array at the same relative location as if it
+ * were the area ESP pointed at. We also trap ESP modifications
+ * and uses these to adjust fn_call_lookaside.esp. On entry
+ * fn_call_lookaside.esp will be set to point at the last entry in
+ * fn_call_lookaside.array. This allows us to check if it has changed, and
+ * if so, on exit, we add the registers we will use to do the move and a
+ * trap/ interrupt return exit sequence. We then adjust the eflags in the
+ * regs array (remember we now have a copy in the fn_call_lookaside.array) to
+ * kill the interrupt bit, AND we change EIP to point at our set up stub.
+ * As part of the register set up we preset the registers to point at the
+ * begining and end of the fn_call_lookaside.array, so all the stub needs to
+ * do is move words from the array to the stack until ESP= the desired value
+ * then do the rti. This will then transfer to the desired function with
+ * all the correct registers. Nifty huh?
+ */
+extern asmlinkage void fn_call_stub(void);
+extern asmlinkage void fn_rtn_stub(void);
+/* *INDENT-OFF* */
+__asm__("fn_rtn_stub:\n\t"
+ "movl %eax,%esp\n\t"
+ "fn_call_stub:\n\t"
+ "1:\n\t"
+ "addl $-4,%ebx\n\t"
+ "movl (%ebx), %eax\n\t"
+ "pushl %eax\n\t"
+ "cmpl %esp,%ecx\n\t"
+ "jne 1b\n\t"
+ "popl %eax\n\t"
+ "popl %ebx\n\t"
+ "popl %ecx\n\t"
+ "iret \n\t");
+/* *INDENT-ON* */
+#define gdb_i386vector kgdb_info.vector
+#define gdb_i386errcode kgdb_info.errcode
+#define waiting_cpus kgdb_info.cpus_waiting
+#define remote_debug kgdb_info.print_debug_info
+#define hold_cpu(cpu) kgdb_info.cpus_waiting[cpu].hold
+/* gdb locks */
+
+#ifdef CONFIG_SMP
+static int in_kgdb_called;
+static spinlock_t waitlocks[MAX_NO_CPUS] =
+ {[0 ... MAX_NO_CPUS - 1] = SPIN_LOCK_UNLOCKED };
+/*
+ * The following array has the thread pointer of each of the "other"
+ * cpus. We make it global so it can be seen by gdb.
+ */
+volatile int in_kgdb_entry_log[MAX_NO_CPUS];
+volatile struct pt_regs *in_kgdb_here_log[MAX_NO_CPUS];
+/*
+static spinlock_t continuelocks[MAX_NO_CPUS];
+*/
+spinlock_t kgdb_spinlock = SPIN_LOCK_UNLOCKED;
+/* waiters on our spinlock plus us */
+static atomic_t spinlock_waiters = ATOMIC_INIT(1);
+static int spinlock_count = 0;
+static int spinlock_cpu = 0;
+/*
+ * Note we use nested spin locks to account for the case where a break
+ * point is encountered when calling a function by user direction from
+ * kgdb. Also there is the memory exception recursion to account for.
+ * Well, yes, but this lets other cpus thru too. Lets add a
+ * cpu id to the lock.
+ */
+#define KGDB_SPIN_LOCK(x) if( spinlock_count == 0 || \
+ spinlock_cpu != smp_processor_id()){\
+ atomic_inc(&spinlock_waiters); \
+ while (! spin_trylock(x)) {\
+ in_kgdb(®s);\
+ }\
+ atomic_dec(&spinlock_waiters); \
+ spinlock_count = 1; \
+ spinlock_cpu = smp_processor_id(); \
+ }else{ \
+ spinlock_count++; \
+ }
+#define KGDB_SPIN_UNLOCK(x) if( --spinlock_count == 0) spin_unlock(x)
+#else
+unsigned kgdb_spinlock = 0;
+#define KGDB_SPIN_LOCK(x) --*x
+#define KGDB_SPIN_UNLOCK(x) ++*x
+#endif
+
+int
+hex(char ch)
+{
+ if ((ch >= 'a') && (ch <= 'f'))
+ return (ch - 'a' + 10);
+ if ((ch >= '0') && (ch <= '9'))
+ return (ch - '0');
+ if ((ch >= 'A') && (ch <= 'F'))
+ return (ch - 'A' + 10);
+ return (-1);
+}
+
+/* scan for the sequence $<data>#<checksum> */
+void
+getpacket(char *buffer)
+{
+ unsigned char checksum;
+ unsigned char xmitcsum;
+ int i;
+ int count;
+ char ch;
+
+ do {
+ /* wait around for the start character, ignore all other characters */
+ while ((ch = (getDebugChar() & 0x7f)) != '$') ;
+ checksum = 0;
+ xmitcsum = -1;
+
+ count = 0;
+
+ /* now, read until a # or end of buffer is found */
+ while (count < BUFMAX) {
+ ch = getDebugChar() & 0x7f;
+ if (ch == '#')
+ break;
+ checksum = checksum + ch;
+ buffer[count] = ch;
+ count = count + 1;
+ }
+ buffer[count] = 0;
+
+ if (ch == '#') {
+ xmitcsum = hex(getDebugChar() & 0x7f) << 4;
+ xmitcsum += hex(getDebugChar() & 0x7f);
+ if ((remote_debug) && (checksum != xmitcsum)) {
+ printk
+ ("bad checksum. My count = 0x%x, sent=0x%x. buf=%s\n",
+ checksum, xmitcsum, buffer);
+ }
+
+ if (checksum != xmitcsum)
+ putDebugChar('-'); /* failed checksum */
+ else {
+ putDebugChar('+'); /* successful transfer */
+ /* if a sequence char is present, reply the sequence ID */
+ if (buffer[2] == ':') {
+ putDebugChar(buffer[0]);
+ putDebugChar(buffer[1]);
+ /* remove sequence chars from buffer */
+ count = strlen(buffer);
+ for (i = 3; i <= count; i++)
+ buffer[i - 3] = buffer[i];
+ }
+ }
+ }
+ } while (checksum != xmitcsum);
+
+ if (remote_debug)
+ printk("R:%s\n", buffer);
+}
+
+/* send the packet in buffer. */
+
+void
+putpacket(char *buffer)
+{
+ unsigned char checksum;
+ int count;
+ char ch;
+
+ /* $<packet info>#<checksum>. */
+ do {
+ if (remote_debug)
+ printk("T:%s\n", buffer);
+ putDebugChar('$');
+ checksum = 0;
+ count = 0;
+
+ while ((ch = buffer[count])) {
+ putDebugChar(ch);
+ checksum += ch;
+ count += 1;
+ }
+
+ putDebugChar('#');
+ putDebugChar(hexchars[checksum >> 4]);
+ putDebugChar(hexchars[checksum % 16]);
+
+ } while ((getDebugChar() & 0x7f) != '+');
+
+}
+
+static char remcomInBuffer[BUFMAX];
+static char remcomOutBuffer[BUFMAX];
+static short error;
+
+void
+debug_error(char *format, char *parm)
+{
+ if (remote_debug)
+ printk(format, parm);
+}
+
+static void
+print_regs(struct pt_regs *regs)
+{
+ printk("EAX=%08lx ", regs->eax);
+ printk("EBX=%08lx ", regs->ebx);
+ printk("ECX=%08lx ", regs->ecx);
+ printk("EDX=%08lx ", regs->edx);
+ printk("\n");
+ printk("ESI=%08lx ", regs->esi);
+ printk("EDI=%08lx ", regs->edi);
+ printk("EBP=%08lx ", regs->ebp);
+ printk("ESP=%08lx ", (long) ®s->esp);
+ printk("\n");
+ printk(" DS=%08x ", regs->xds);
+ printk(" ES=%08x ", regs->xes);
+ printk(" SS=%08x ", __KERNEL_DS);
+ printk(" FL=%08lx ", regs->eflags);
+ printk("\n");
+ printk(" CS=%08x ", regs->xcs);
+ printk(" IP=%08lx ", regs->eip);
+#if 0
+ printk(" FS=%08x ", regs->fs);
+ printk(" GS=%08x ", regs->gs);
+#endif
+ printk("\n");
+
+} /* print_regs */
+
+#define NEW_esp fn_call_lookaside[trap_cpu].esp
+
+static void
+regs_to_gdb_regs(int *gdb_regs, struct pt_regs *regs)
+{
+ gdb_regs[_EAX] = regs->eax;
+ gdb_regs[_EBX] = regs->ebx;
+ gdb_regs[_ECX] = regs->ecx;
+ gdb_regs[_EDX] = regs->edx;
+ gdb_regs[_ESI] = regs->esi;
+ gdb_regs[_EDI] = regs->edi;
+ gdb_regs[_EBP] = regs->ebp;
+ gdb_regs[_DS] = regs->xds;
+ gdb_regs[_ES] = regs->xes;
+ gdb_regs[_PS] = regs->eflags;
+ gdb_regs[_CS] = regs->xcs;
+ gdb_regs[_PC] = regs->eip;
+ /* Note, as we are a debugging the kernel, we will always
+ * trap in kernel code, this means no priviledge change,
+ * and so the pt_regs structure is not completely valid. In a non
+ * privilege change trap, only EFLAGS, CS and EIP are put on the stack,
+ * SS and ESP are not stacked, this means that the last 2 elements of
+ * pt_regs is not valid (they would normally refer to the user stack)
+ * also, using regs+1 is no good because you end up will a value that is
+ * 2 longs (8) too high. This used to cause stepping over functions
+ * to fail, so my fix is to use the address of regs->esp, which
+ * should point at the end of the stack frame. Note I have ignored
+ * completely exceptions that cause an error code to be stacked, such
+ * as double fault. Stuart Hughes, Zentropix.
+ * original code: gdb_regs[_ESP] = (int) (regs + 1) ;
+
+ * this is now done on entry and moved to OLD_esp (as well as NEW_esp).
+ */
+ gdb_regs[_ESP] = NEW_esp;
+ gdb_regs[_SS] = __KERNEL_DS;
+ gdb_regs[_FS] = 0xFFFF;
+ gdb_regs[_GS] = 0xFFFF;
+} /* regs_to_gdb_regs */
+
+static void
+gdb_regs_to_regs(int *gdb_regs, struct pt_regs *regs)
+{
+ regs->eax = gdb_regs[_EAX];
+ regs->ebx = gdb_regs[_EBX];
+ regs->ecx = gdb_regs[_ECX];
+ regs->edx = gdb_regs[_EDX];
+ regs->esi = gdb_regs[_ESI];
+ regs->edi = gdb_regs[_EDI];
+ regs->ebp = gdb_regs[_EBP];
+ regs->xds = gdb_regs[_DS];
+ regs->xes = gdb_regs[_ES];
+ regs->eflags = gdb_regs[_PS];
+ regs->xcs = gdb_regs[_CS];
+ regs->eip = gdb_regs[_PC];
+ NEW_esp = gdb_regs[_ESP]; /* keep the value */
+#if 0 /* can't change these */
+ regs->esp = gdb_regs[_ESP];
+ regs->xss = gdb_regs[_SS];
+ regs->fs = gdb_regs[_FS];
+ regs->gs = gdb_regs[_GS];
+#endif
+
+} /* gdb_regs_to_regs */
+
+int thread_list = 0;
+
+void
+get_gdb_regs(struct task_struct *p, struct pt_regs *regs, int *gdb_regs)
+{
+ unsigned long stack_page;
+ int count = 0;
+ IF_SMP(int i);
+ if (!p || p == current) {
+ regs_to_gdb_regs(gdb_regs, regs);
+ return;
+ }
+#ifdef CONFIG_SMP
+ for (i = 0; i < MAX_NO_CPUS; i++) {
+ if (p == kgdb_info.cpus_waiting[i].task) {
+ regs_to_gdb_regs(gdb_regs,
+ kgdb_info.cpus_waiting[i].regs);
+ gdb_regs[_ESP] =
+ (int) &kgdb_info.cpus_waiting[i].regs->esp;
+
+ return;
+ }
+ }
+#endif
+ memset(gdb_regs, 0, NUMREGBYTES);
+ gdb_regs[_ESP] = p->thread.esp;
+ gdb_regs[_PC] = p->thread.eip;
+ gdb_regs[_EBP] = *(int *) gdb_regs[_ESP];
+ gdb_regs[_EDI] = *(int *) (gdb_regs[_ESP] + 4);
+ gdb_regs[_ESI] = *(int *) (gdb_regs[_ESP] + 8);
+
+/*
+ * This code is to give a more informative notion of where a process
+ * is waiting. It is used only when the user asks for a thread info
+ * list. If he then switches to the thread, s/he will find the task
+ * is in schedule, but a back trace should show the same info we come
+ * up with. This code was shamelessly purloined from process.c. It was
+ * then enhanced to provide more registers than simply the program
+ * counter.
+ */
+
+ if (!thread_list) {
+ return;
+ }
+
+ if (p->state == TASK_RUNNING)
+ return;
+ stack_page = (unsigned long) p->thread_info;
+ if (gdb_regs[_ESP] < stack_page || gdb_regs[_ESP] >
+ THREAD_SIZE - sizeof(long) + stack_page)
+ return;
+ /* include/asm-i386/system.h:switch_to() pushes ebp last. */
+ do {
+ if (gdb_regs[_EBP] < stack_page ||
+ gdb_regs[_EBP] > THREAD_SIZE - 2*sizeof(long) + stack_page)
+ return;
+ gdb_regs[_PC] = *(unsigned long *) (gdb_regs[_EBP] + 4);
+ gdb_regs[_ESP] = gdb_regs[_EBP] + 8;
+ gdb_regs[_EBP] = *(unsigned long *) gdb_regs[_EBP];
+ if (!in_sched_functions(gdb_regs[_PC]))
+ return;
+ } while (count++ < 16);
+ return;
+}
+
+/* Indicate to caller of mem2hex or hex2mem that there has been an
+ error. */
+static volatile int mem_err = 0;
+static volatile int mem_err_expected = 0;
+static volatile int mem_err_cnt = 0;
+static int garbage_loc = -1;
+
+int
+get_char(char *addr)
+{
+ return *addr;
+}
+
+void
+set_char(char *addr, int val, int may_fault)
+{
+ /*
+ * This code traps references to the area mapped to the kernel
+ * stack as given by the regs and, instead, stores to the
+ * fn_call_lookaside[cpu].array
+ */
+ if (may_fault &&
+ (unsigned int) addr < OLD_esp &&
+ ((unsigned int) addr > (OLD_esp - (unsigned int) LOOKASIDE_SIZE))) {
+ addr = (char *) END_OF_LOOKASIDE - ((char *) OLD_esp - addr);
+ }
+ *addr = val;
+}
+
+/* convert the memory pointed to by mem into hex, placing result in buf */
+/* return a pointer to the last char put in buf (null) */
+/* If MAY_FAULT is non-zero, then we should set mem_err in response to
+ a fault; if zero treat a fault like any other fault in the stub. */
+char *
+mem2hex(char *mem, char *buf, int count, int may_fault)
+{
+ int i;
+ unsigned char ch;
+
+ if (may_fault) {
+ mem_err_expected = 1;
+ mem_err = 0;
+ }
+ for (i = 0; i < count; i++) {
+ /* printk("%lx = ", mem) ; */
+
+ ch = get_char(mem++);
+
+ /* printk("%02x\n", ch & 0xFF) ; */
+ if (may_fault && mem_err) {
+ if (remote_debug)
+ printk("Mem fault fetching from addr %lx\n",
+ (long) (mem - 1));
+ *buf = 0; /* truncate buffer */
+ return (buf);
+ }
+ *buf++ = hexchars[ch >> 4];
+ *buf++ = hexchars[ch % 16];
+ }
+ *buf = 0;
+ if (may_fault)
+ mem_err_expected = 0;
+ return (buf);
+}
+
+/* convert the hex array pointed to by buf into binary to be placed in mem */
+/* return a pointer to the character AFTER the last byte written */
+/* NOTE: We use the may fault flag to also indicate if the write is to
+ * the registers (0) or "other" memory (!=0)
+ */
+char *
+hex2mem(char *buf, char *mem, int count, int may_fault)
+{
+ int i;
+ unsigned char ch;
+
+ if (may_fault) {
+ mem_err_expected = 1;
+ mem_err = 0;
+ }
+ for (i = 0; i < count; i++) {
+ ch = hex(*buf++) << 4;
+ ch = ch + hex(*buf++);
+ set_char(mem++, ch, may_fault);
+
+ if (may_fault && mem_err) {
+ if (remote_debug)
+ printk("Mem fault storing to addr %lx\n",
+ (long) (mem - 1));
+ return (mem);
+ }
+ }
+ if (may_fault)
+ mem_err_expected = 0;
+ return (mem);
+}
+
+/**********************************************/
+/* WHILE WE FIND NICE HEX CHARS, BUILD AN INT */
+/* RETURN NUMBER OF CHARS PROCESSED */
+/**********************************************/
+int
+hexToInt(char **ptr, int *intValue)
+{
+ int numChars = 0;
+ int hexValue;
+
+ *intValue = 0;
+
+ while (**ptr) {
+ hexValue = hex(**ptr);
+ if (hexValue >= 0) {
+ *intValue = (*intValue << 4) | hexValue;
+ numChars++;
+ } else
+ break;
+
+ (*ptr)++;
+ }
+
+ return (numChars);
+}
+
+#define stubhex(h) hex(h)
+#ifdef old_thread_list
+
+static int
+stub_unpack_int(char *buff, int fieldlength)
+{
+ int nibble;
+ int retval = 0;
+
+ while (fieldlength) {
+ nibble = stubhex(*buff++);
+ retval |= nibble;
+ fieldlength--;
+ if (fieldlength)
+ retval = retval << 4;
+ }
+ return retval;
+}
+#endif
+static char *
+pack_hex_byte(char *pkt, int byte)
+{
+ *pkt++ = hexchars[(byte >> 4) & 0xf];
+ *pkt++ = hexchars[(byte & 0xf)];
+ return pkt;
+}
+
+#define BUF_THREAD_ID_SIZE 16
+
+static char *
+pack_threadid(char *pkt, threadref * id)
+{
+ char *limit;
+ unsigned char *altid;
+
+ altid = (unsigned char *) id;
+ limit = pkt + BUF_THREAD_ID_SIZE;
+ while (pkt < limit)
+ pkt = pack_hex_byte(pkt, *altid++);
+ return pkt;
+}
+
+#ifdef old_thread_list
+static char *
+unpack_byte(char *buf, int *value)
+{
+ *value = stub_unpack_int(buf, 2);
+ return buf + 2;
+}
+
+static char *
+unpack_threadid(char *inbuf, threadref * id)
+{
+ char *altref;
+ char *limit = inbuf + BUF_THREAD_ID_SIZE;
+ int x, y;
+
+ altref = (char *) id;
+
+ while (inbuf < limit) {
+ x = stubhex(*inbuf++);
+ y = stubhex(*inbuf++);
+ *altref++ = (x << 4) | y;
+ }
+ return inbuf;
+}
+#endif
+void
+int_to_threadref(threadref * id, int value)
+{
+ unsigned char *scan;
+
+ scan = (unsigned char *) id;
+ {
+ int i = 4;
+ while (i--)
+ *scan++ = 0;
+ }
+ *scan++ = (value >> 24) & 0xff;
+ *scan++ = (value >> 16) & 0xff;
+ *scan++ = (value >> 8) & 0xff;
+ *scan++ = (value & 0xff);
+}
+int
+int_to_hex_v(unsigned char * id, int value)
+{
+ unsigned char *start = id;
+ int shift;
+ int ch;
+
+ for (shift = 28; shift >= 0; shift -= 4) {
+ if ((ch = (value >> shift) & 0xf) || (id != start)) {
+ *id = hexchars[ch];
+ id++;
+ }
+ }
+ if (id == start)
+ *id++ = '0';
+ return id - start;
+}
+#ifdef old_thread_list
+
+static int
+threadref_to_int(threadref * ref)
+{
+ int i, value = 0;
+ unsigned char *scan;
+
+ scan = (char *) ref;
+ scan += 4;
+ i = 4;
+ while (i-- > 0)
+ value = (value << 8) | ((*scan++) & 0xff);
+ return value;
+}
+#endif
+static int
+cmp_str(char *s1, char *s2, int count)
+{
+ while (count--) {
+ if (*s1++ != *s2++)
+ return 0;
+ }
+ return 1;
+}
+
+#if 1 /* this is a hold over from 2.4 where O(1) was "sometimes" */
+extern struct task_struct *kgdb_get_idle(int cpu);
+#define idle_task(cpu) kgdb_get_idle(cpu)
+#else
+#define idle_task(cpu) init_tasks[cpu]
+#endif
+
+extern int kgdb_pid_init_done;
+
+struct task_struct *
+getthread(int pid)
+{
+ struct task_struct *thread;
+ if (pid >= PID_MAX && pid <= (PID_MAX + MAX_NO_CPUS)) {
+
+ return idle_task(pid - PID_MAX);
+ } else {
+ /*
+ * find_task_by_pid is relatively safe all the time
+ * Other pid functions require lock downs which imply
+ * that we may be interrupting them (as we get here
+ * in the middle of most any lock down).
+ * Still we don't want to call until the table exists!
+ */
+ if (kgdb_pid_init_done){
+ thread = find_task_by_pid(pid);
+ if (thread) {
+ return thread;
+ }
+ }
+ }
+ return NULL;
+}
+/* *INDENT-OFF* */
+struct hw_breakpoint {
+ unsigned enabled;
+ unsigned type;
+ unsigned len;
+ unsigned addr;
+} breakinfo[4] = { {enabled:0},
+ {enabled:0},
+ {enabled:0},
+ {enabled:0}};
+/* *INDENT-ON* */
+unsigned hw_breakpoint_status;
+void
+correct_hw_break(void)
+{
+ int breakno;
+ int correctit;
+ int breakbit;
+ unsigned dr7;
+
+ asm volatile ("movl %%db7, %0\n":"=r" (dr7)
+ :);
+ /* *INDENT-OFF* */
+ do {
+ unsigned addr0, addr1, addr2, addr3;
+ asm volatile ("movl %%db0, %0\n"
+ "movl %%db1, %1\n"
+ "movl %%db2, %2\n"
+ "movl %%db3, %3\n"
+ :"=r" (addr0), "=r"(addr1),
+ "=r"(addr2), "=r"(addr3)
+ :);
+ } while (0);
+ /* *INDENT-ON* */
+ correctit = 0;
+ for (breakno = 0; breakno < 3; breakno++) {
+ breakbit = 2 << (breakno << 1);
+ if (!(dr7 & breakbit) && breakinfo[breakno].enabled) {
+ correctit = 1;
+ dr7 |= breakbit;
+ dr7 &= ~(0xf0000 << (breakno << 2));
+ dr7 |= (((breakinfo[breakno].len << 2) |
+ breakinfo[breakno].type) << 16) <<
+ (breakno << 2);
+ switch (breakno) {
+ case 0:
+ asm volatile ("movl %0, %%dr0\n"::"r"
+ (breakinfo[breakno].addr));
+ break;
+
+ case 1:
+ asm volatile ("movl %0, %%dr1\n"::"r"
+ (breakinfo[breakno].addr));
+ break;
+
+ case 2:
+ asm volatile ("movl %0, %%dr2\n"::"r"
+ (breakinfo[breakno].addr));
+ break;
+
+ case 3:
+ asm volatile ("movl %0, %%dr3\n"::"r"
+ (breakinfo[breakno].addr));
+ break;
+ }
+ } else if ((dr7 & breakbit) && !breakinfo[breakno].enabled) {
+ correctit = 1;
+ dr7 &= ~breakbit;
+ dr7 &= ~(0xf0000 << (breakno << 2));
+ }
+ }
+ if (correctit) {
+ asm volatile ("movl %0, %%db7\n"::"r" (dr7));
+ }
+}
+
+int
+remove_hw_break(unsigned breakno)
+{
+ if (!breakinfo[breakno].enabled) {
+ return -1;
+ }
+ breakinfo[breakno].enabled = 0;
+ return 0;
+}
+
+int
+set_hw_break(unsigned breakno, unsigned type, unsigned len, unsigned addr)
+{
+ if (breakinfo[breakno].enabled) {
+ return -1;
+ }
+ breakinfo[breakno].enabled = 1;
+ breakinfo[breakno].type = type;
+ breakinfo[breakno].len = len;
+ breakinfo[breakno].addr = addr;
+ return 0;
+}
+
+#ifdef CONFIG_SMP
+static int in_kgdb_console = 0;
+
+int
+in_kgdb(struct pt_regs *regs)
+{
+ unsigned flags;
+ int cpu = smp_processor_id();
+ in_kgdb_called = 1;
+ if (!spin_is_locked(&kgdb_spinlock)) {
+ if (in_kgdb_here_log[cpu] || /* we are holding this cpu */
+ in_kgdb_console) { /* or we are doing slow i/o */
+ return 1;
+ }
+ return 0;
+ }
+
+ /* As I see it the only reason not to let all cpus spin on
+ * the same spin_lock is to allow selected ones to proceed.
+ * This would be a good thing, so we leave it this way.
+ * Maybe someday.... Done !
+
+ * in_kgdb() is called from an NMI so we don't pretend
+ * to have any resources, like printk() for example.
+ */
+
+ kgdb_local_irq_save(flags); /* only local here, to avoid hanging */
+ /*
+ * log arival of this cpu
+ * The NMI keeps on ticking. Protect against recurring more
+ * than once, and ignor the cpu that has the kgdb lock
+ */
+ in_kgdb_entry_log[cpu]++;
+ in_kgdb_here_log[cpu] = regs;
+ if (cpu == spinlock_cpu || waiting_cpus[cpu].task) {
+ goto exit_in_kgdb;
+ }
+ /*
+ * For protection of the initilization of the spin locks by kgdb
+ * it locks the kgdb spinlock before it gets the wait locks set
+ * up. We wait here for the wait lock to be taken. If the
+ * kgdb lock goes away first?? Well, it could be a slow exit
+ * sequence where the wait lock is removed prior to the kgdb lock
+ * so if kgdb gets unlocked, we just exit.
+ */
+ while (spin_is_locked(&kgdb_spinlock) &&
+ !spin_is_locked(waitlocks + cpu)) ;
+ if (!spin_is_locked(&kgdb_spinlock)) {
+ goto exit_in_kgdb;
+ }
+ waiting_cpus[cpu].task = current;
+ waiting_cpus[cpu].pid = (current->pid) ? : (PID_MAX + cpu);
+ waiting_cpus[cpu].regs = regs;
+
+ spin_unlock_wait(waitlocks + cpu);
+ /*
+ * log departure of this cpu
+ */
+ waiting_cpus[cpu].task = 0;
+ waiting_cpus[cpu].pid = 0;
+ waiting_cpus[cpu].regs = 0;
+ correct_hw_break();
+ exit_in_kgdb:
+ in_kgdb_here_log[cpu] = 0;
+ kgdb_local_irq_restore(flags);
+ return 1;
+ /*
+ spin_unlock(continuelocks + smp_processor_id());
+ */
+}
+
+void
+smp__in_kgdb(struct pt_regs regs)
+{
+ ack_APIC_irq();
+ in_kgdb(®s);
+}
+#else
+int
+in_kgdb(struct pt_regs *regs)
+{
+ return (kgdb_spinlock);
+}
+#endif
+
+void
+printexceptioninfo(int exceptionNo, int errorcode, char *buffer)
+{
+ unsigned dr6;
+ int i;
+ switch (exceptionNo) {
+ case 1: /* debug exception */
+ break;
+ case 3: /* breakpoint */
+ sprintf(buffer, "Software breakpoint");
+ return;
+ default:
+ sprintf(buffer, "Details not available");
+ return;
+ }
+ asm volatile ("movl %%db6, %0\n":"=r" (dr6)
+ :);
+ if (dr6 & 0x4000) {
+ sprintf(buffer, "Single step");
+ return;
+ }
+ for (i = 0; i < 4; ++i) {
+ if (dr6 & (1 << i)) {
+ sprintf(buffer, "Hardware breakpoint %d", i);
+ return;
+ }
+ }
+ sprintf(buffer, "Unknown trap");
+ return;
+}
+
+/*
+ * This function does all command procesing for interfacing to gdb.
+ *
+ * NOTE: The INT nn instruction leaves the state of the interrupt
+ * enable flag UNCHANGED. That means that when this routine
+ * is entered via a breakpoint (INT 3) instruction from code
+ * that has interrupts enabled, then interrupts will STILL BE
+ * enabled when this routine is entered. The first thing that
+ * we do here is disable interrupts so as to prevent recursive
+ * entries and bothersome serial interrupts while we are
+ * trying to run the serial port in polled mode.
+ *
+ * For kernel version 2.1.xx the kgdb_cli() actually gets a spin lock so
+ * it is always necessary to do a restore_flags before returning
+ * so as to let go of that lock.
+ */
+int
+kgdb_handle_exception(int exceptionVector,
+ int signo, int err_code, struct pt_regs *linux_regs)
+{
+ struct task_struct *usethread = NULL;
+ struct task_struct *thread_list_start = 0, *thread = NULL;
+ int addr, length;
+ int breakno, breaktype;
+ char *ptr;
+ int newPC;
+ threadref thref;
+ int threadid;
+ int thread_min = PID_MAX + MAX_NO_CPUS;
+#ifdef old_thread_list
+ int maxthreads;
+#endif
+ int nothreads;
+ unsigned long flags;
+ int gdb_regs[NUMREGBYTES / 4];
+ int dr6;
+ IF_SMP(int entry_state = 0); /* 0, ok, 1, no nmi, 2 sync failed */
+#define NO_NMI 1
+#define NO_SYNC 2
+#define regs (*linux_regs)
+#define NUMREGS NUMREGBYTES/4
+ /*
+ * If the entry is not from the kernel then return to the Linux
+ * trap handler and let it process the interrupt normally.
+ */
+ if ((linux_regs->eflags & VM_MASK) || (3 & linux_regs->xcs)) {
+ printk("ignoring non-kernel exception\n");
+ print_regs(®s);
+ return (0);
+ }
+
+ kgdb_local_irq_save(flags);
+
+ /* Get kgdb spinlock */
+
+ KGDB_SPIN_LOCK(&kgdb_spinlock);
+ rdtscll(kgdb_info.entry_tsc);
+ /*
+ * We depend on this spinlock and the NMI watch dog to control the
+ * other cpus. They will arrive at "in_kgdb()" as a result of the
+ * NMI and will wait there for the following spin locks to be
+ * released.
+ */
+#ifdef CONFIG_SMP
+
+#if 0
+ if (cpu_callout_map & ~MAX_CPU_MASK) {
+ printk("kgdb : too many cpus, possibly not mapped"
+ " in contiguous space, change MAX_NO_CPUS"
+ " in kgdb_stub and make new kernel.\n"
+ " cpu_callout_map is %lx\n", cpu_callout_map);
+ goto exit_just_unlock;
+ }
+#endif
+ if (spinlock_count == 1) {
+ int time = 0, end_time, dum = 0;
+ int i;
+ int cpu_logged_in[MAX_NO_CPUS] = {[0 ... MAX_NO_CPUS - 1] = (0)
+ };
+ if (remote_debug) {
+ printk("kgdb : cpu %d entry, syncing others\n",
+ smp_processor_id());
+ }
+ for (i = 0; i < MAX_NO_CPUS; i++) {
+ /*
+ * Use trylock as we may already hold the lock if
+ * we are holding the cpu. Net result is all
+ * locked.
+ */
+ spin_trylock(&waitlocks[i]);
+ }
+ for (i = 0; i < MAX_NO_CPUS; i++)
+ cpu_logged_in[i] = 0;
+ /*
+ * Wait for their arrival. We know the watch dog is active if
+ * in_kgdb() has ever been called, as it is always called on a
+ * watchdog tick.
+ */
+ rdtsc(dum, time);
+ end_time = time + 2; /* Note: we use the High order bits! */
+ i = 1;
+ if (num_online_cpus() > 1) {
+ int me_in_kgdb = in_kgdb_entry_log[smp_processor_id()];
+ smp_send_nmi_allbutself();
+ while (i < num_online_cpus() && time != end_time) {
+ int j;
+ for (j = 0; j < MAX_NO_CPUS; j++) {
+ if (waiting_cpus[j].task &&
+ !cpu_logged_in[j]) {
+ i++;
+ cpu_logged_in[j] = 1;
+ if (remote_debug) {
+ printk
+ ("kgdb : cpu %d arrived at kgdb\n",
+ j);
+ }
+ break;
+ } else if (!waiting_cpus[j].task &&
+ !cpu_online(j)) {
+ waiting_cpus[j].task = NOCPU;
+ cpu_logged_in[j] = 1;
+ waiting_cpus[j].hold = 1;
+ break;
+ }
+ if (!waiting_cpus[j].task &&
+ in_kgdb_here_log[j]) {
+
+ int wait = 100000;
+ while (wait--) ;
+ if (!waiting_cpus[j].task &&
+ in_kgdb_here_log[j]) {
+ printk
+ ("kgdb : cpu %d stall"
+ " in in_kgdb\n",
+ j);
+ i++;
+ cpu_logged_in[j] = 1;
+ waiting_cpus[j].task =
+ (struct task_struct
+ *) 1;
+ }
+ }
+ }
+
+ if (in_kgdb_entry_log[smp_processor_id()] >
+ (me_in_kgdb + 10)) {
+ break;
+ }
+
+ rdtsc(dum, time);
+ }
+ if (i < num_online_cpus()) {
+ printk
+ ("kgdb : time out, proceeding without sync\n");
+#if 0
+ printk("kgdb : Waiting_cpus: 0 = %d, 1 = %d\n",
+ waiting_cpus[0].task != 0,
+ waiting_cpus[1].task != 0);
+ printk("kgdb : Cpu_logged in: 0 = %d, 1 = %d\n",
+ cpu_logged_in[0], cpu_logged_in[1]);
+ printk
+ ("kgdb : in_kgdb_here_log in: 0 = %d, 1 = %d\n",
+ in_kgdb_here_log[0] != 0,
+ in_kgdb_here_log[1] != 0);
+#endif
+ entry_state = NO_SYNC;
+ } else {
+#if 0
+ int ent =
+ in_kgdb_entry_log[smp_processor_id()] -
+ me_in_kgdb;
+ printk("kgdb : sync after %d entries\n", ent);
+#endif
+ }
+ } else {
+ if (remote_debug) {
+ printk
+ ("kgdb : %d cpus, but watchdog not active\n"
+ "proceeding without locking down other cpus\n",
+ num_online_cpus());
+ entry_state = NO_NMI;
+ }
+ }
+ }
+#endif
+
+ if (remote_debug) {
+ unsigned long *lp = (unsigned long *) &linux_regs;
+
+ printk("handle_exception(exceptionVector=%d, "
+ "signo=%d, err_code=%d, linux_regs=%p)\n",
+ exceptionVector, signo, err_code, linux_regs);
+ if (debug_regs) {
+ print_regs(®s);
+ printk("Stk: %8lx %8lx %8lx %8lx"
+ " %8lx %8lx %8lx %8lx\n",
+ lp[0], lp[1], lp[2], lp[3],
+ lp[4], lp[5], lp[6], lp[7]);
+ printk(" %8lx %8lx %8lx %8lx"
+ " %8lx %8lx %8lx %8lx\n",
+ lp[8], lp[9], lp[10], lp[11],
+ lp[12], lp[13], lp[14], lp[15]);
+ printk(" %8lx %8lx %8lx %8lx "
+ "%8lx %8lx %8lx %8lx\n",
+ lp[16], lp[17], lp[18], lp[19],
+ lp[20], lp[21], lp[22], lp[23]);
+ printk(" %8lx %8lx %8lx %8lx "
+ "%8lx %8lx %8lx %8lx\n",
+ lp[24], lp[25], lp[26], lp[27],
+ lp[28], lp[29], lp[30], lp[31]);
+ }
+ }
+
+ /* Disable hardware debugging while we are in kgdb */
+ /* Get the debug register status register */
+/* *INDENT-OFF* */
+ __asm__("movl %0,%%db7"
+ : /* no output */
+ :"r"(0));
+
+ asm volatile ("movl %%db6, %0\n"
+ :"=r" (hw_breakpoint_status)
+ :);
+
+/* *INDENT-ON* */
+ switch (exceptionVector) {
+ case 0: /* divide error */
+ case 1: /* debug exception */
+ case 2: /* NMI */
+ case 3: /* breakpoint */
+ case 4: /* overflow */
+ case 5: /* bounds check */
+ case 6: /* invalid opcode */
+ case 7: /* device not available */
+ case 8: /* double fault (errcode) */
+ case 10: /* invalid TSS (errcode) */
+ case 12: /* stack fault (errcode) */
+ case 16: /* floating point error */
+ case 17: /* alignment check (errcode) */
+ default: /* any undocumented */
+ break;
+ case 11: /* segment not present (errcode) */
+ case 13: /* general protection (errcode) */
+ case 14: /* page fault (special errcode) */
+ case 19: /* cache flush denied */
+ if (mem_err_expected) {
+ /*
+ * This fault occured because of the
+ * get_char or set_char routines. These
+ * two routines use either eax of edx to
+ * indirectly reference the location in
+ * memory that they are working with.
+ * For a page fault, when we return the
+ * instruction will be retried, so we
+ * have to make sure that these
+ * registers point to valid memory.
+ */
+ mem_err = 1; /* set mem error flag */
+ mem_err_expected = 0;
+ mem_err_cnt++; /* helps in debugging */
+ /* make valid address */
+ regs.eax = (long) &garbage_loc;
+ /* make valid address */
+ regs.edx = (long) &garbage_loc;
+ if (remote_debug)
+ printk("Return after memory error: "
+ "mem_err_cnt=%d\n", mem_err_cnt);
+ if (debug_regs)
+ print_regs(®s);
+ goto exit_kgdb;
+ }
+ break;
+ }
+ if (remote_debug)
+ printk("kgdb : entered kgdb on cpu %d\n", smp_processor_id());
+
+ gdb_i386vector = exceptionVector;
+ gdb_i386errcode = err_code;
+ kgdb_info.called_from = __builtin_return_address(0);
+#ifdef CONFIG_SMP
+ /*
+ * OK, we can now communicate, lets tell gdb about the sync.
+ * but only if we had a problem.
+ */
+ switch (entry_state) {
+ case NO_NMI:
+ to_gdb("NMI not active, other cpus not stopped\n");
+ break;
+ case NO_SYNC:
+ to_gdb("Some cpus not stopped, see 'kgdb_info' for details\n");
+ default:;
+ }
+
+#endif
+/*
+ * Set up the gdb function call area.
+ */
+ trap_cpu = smp_processor_id();
+ OLD_esp = NEW_esp = (int) (&linux_regs->esp);
+
+ IF_SMP(once_again:)
+ /* reply to host that an exception has occurred */
+ remcomOutBuffer[0] = 'S';
+ remcomOutBuffer[1] = hexchars[signo >> 4];
+ remcomOutBuffer[2] = hexchars[signo % 16];
+ remcomOutBuffer[3] = 0;
+
+ putpacket(remcomOutBuffer);
+
+ while (1 == 1) {
+ error = 0;
+ remcomOutBuffer[0] = 0;
+ getpacket(remcomInBuffer);
+ switch (remcomInBuffer[0]) {
+ case '?':
+ remcomOutBuffer[0] = 'S';
+ remcomOutBuffer[1] = hexchars[signo >> 4];
+ remcomOutBuffer[2] = hexchars[signo % 16];
+ remcomOutBuffer[3] = 0;
+ break;
+ case 'd':
+ remote_debug = !(remote_debug); /* toggle debug flag */
+ printk("Remote debug %s\n",
+ remote_debug ? "on" : "off");
+ break;
+ case 'g': /* return the value of the CPU registers */
+ get_gdb_regs(usethread, ®s, gdb_regs);
+ mem2hex((char *) gdb_regs,
+ remcomOutBuffer, NUMREGBYTES, 0);
+ break;
+ case 'G': /* set the value of the CPU registers - return OK */
+ hex2mem(&remcomInBuffer[1],
+ (char *) gdb_regs, NUMREGBYTES, 0);
+ if (!usethread || usethread == current) {
+ gdb_regs_to_regs(gdb_regs, ®s);
+ strcpy(remcomOutBuffer, "OK");
+ } else {
+ strcpy(remcomOutBuffer, "E00");
+ }
+ break;
+
+ case 'P':{ /* set the value of a single CPU register -
+ return OK */
+ /*
+ * For some reason, gdb wants to talk about psudo
+ * registers (greater than 15). These may have
+ * meaning for ptrace, but for us it is safe to
+ * ignor them. We do this by dumping them into
+ * _GS which we also ignor, but do have memory for.
+ */
+ int regno;
+
+ ptr = &remcomInBuffer[1];
+ regs_to_gdb_regs(gdb_regs, ®s);
+ if ((!usethread || usethread == current) &&
+ hexToInt(&ptr, ®no) &&
+ *ptr++ == '=' && (regno >= 0)) {
+ regno =
+ (regno >= NUMREGS ? _GS : regno);
+ hex2mem(ptr, (char *) &gdb_regs[regno],
+ 4, 0);
+ gdb_regs_to_regs(gdb_regs, ®s);
+ strcpy(remcomOutBuffer, "OK");
+ break;
+ }
+ strcpy(remcomOutBuffer, "E01");
+ break;
+ }
+
+ /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
+ case 'm':
+ /* TRY TO READ %x,%x. IF SUCCEED, SET PTR = 0 */
+ ptr = &remcomInBuffer[1];
+ if (hexToInt(&ptr, &addr) &&
+ (*(ptr++) == ',') && (hexToInt(&ptr, &length))) {
+ ptr = 0;
+ /*
+ * hex doubles the byte count
+ */
+ if (length > (BUFMAX / 2))
+ length = BUFMAX / 2;
+ mem2hex((char *) addr,
+ remcomOutBuffer, length, 1);
+ if (mem_err) {
+ strcpy(remcomOutBuffer, "E03");
+ debug_error("memory fault\n", NULL);
+ }
+ }
+
+ if (ptr) {
+ strcpy(remcomOutBuffer, "E01");
+ debug_error
+ ("malformed read memory command: %s\n",
+ remcomInBuffer);
+ }
+ break;
+
+ /* MAA..AA,LLLL:
+ Write LLLL bytes at address AA.AA return OK */
+ case 'M':
+ /* TRY TO READ '%x,%x:'. IF SUCCEED, SET PTR = 0 */
+ ptr = &remcomInBuffer[1];
+ if (hexToInt(&ptr, &addr) &&
+ (*(ptr++) == ',') &&
+ (hexToInt(&ptr, &length)) && (*(ptr++) == ':')) {
+ hex2mem(ptr, (char *) addr, length, 1);
+
+ if (mem_err) {
+ strcpy(remcomOutBuffer, "E03");
+ debug_error("memory fault\n", NULL);
+ } else {
+ strcpy(remcomOutBuffer, "OK");
+ }
+
+ ptr = 0;
+ }
+ if (ptr) {
+ strcpy(remcomOutBuffer, "E02");
+ debug_error
+ ("malformed write memory command: %s\n",
+ remcomInBuffer);
+ }
+ break;
+ case 'S':
+ remcomInBuffer[0] = 's';
+ case 'C':
+ /* Csig;AA..AA where ;AA..AA is optional
+ * continue with signal
+ * Since signals are meaning less to us, delete that
+ * part and then fall into the 'c' code.
+ */
+ ptr = &remcomInBuffer[1];
+ length = 2;
+ while (*ptr && *ptr != ';') {
+ length++;
+ ptr++;
+ }
+ if (*ptr) {
+ do {
+ ptr++;
+ *(ptr - length++) = *ptr;
+ } while (*ptr);
+ } else {
+ remcomInBuffer[1] = 0;
+ }
+
+ /* cAA..AA Continue at address AA..AA(optional) */
+ /* sAA..AA Step one instruction from AA..AA(optional) */
+ /* D detach, reply OK and then continue */
+ case 'c':
+ case 's':
+ case 'D':
+
+ /* try to read optional parameter,
+ pc unchanged if no parm */
+ ptr = &remcomInBuffer[1];
+ if (hexToInt(&ptr, &addr)) {
+ if (remote_debug)
+ printk("Changing EIP to 0x%x\n", addr);
+
+ regs.eip = addr;
+ }
+
+ newPC = regs.eip;
+
+ /* clear the trace bit */
+ regs.eflags &= 0xfffffeff;
+
+ /* set the trace bit if we're stepping */
+ if (remcomInBuffer[0] == 's')
+ regs.eflags |= 0x100;
+
+ /* detach is a friendly version of continue. Note that
+ debugging is still enabled (e.g hit control C)
+ */
+ if (remcomInBuffer[0] == 'D') {
+ strcpy(remcomOutBuffer, "OK");
+ putpacket(remcomOutBuffer);
+ }
+
+ if (remote_debug) {
+ printk("Resuming execution\n");
+ print_regs(®s);
+ }
+ asm volatile ("movl %%db6, %0\n":"=r" (dr6)
+ :);
+ if (!(dr6 & 0x4000)) {
+ for (breakno = 0; breakno < 4; ++breakno) {
+ if (dr6 & (1 << breakno) &&
+ (breakinfo[breakno].type == 0)) {
+ /* Set restore flag */
+ regs.eflags |= 0x10000;
+ break;
+ }
+ }
+ }
+ correct_hw_break();
+ asm volatile ("movl %0, %%db6\n"::"r" (0));
+ goto exit_kgdb;
+
+ /* kill the program */
+ case 'k': /* do nothing */
+ break;
+
+ /* query */
+ case 'q':
+ nothreads = 0;
+ switch (remcomInBuffer[1]) {
+ case 'f':
+ threadid = 1;
+ thread_list = 2;
+ thread_list_start = (usethread ? : current);
+ case 's':
+ if (!cmp_str(&remcomInBuffer[2],
+ "ThreadInfo", 10))
+ break;
+
+ remcomOutBuffer[nothreads++] = 'm';
+ for (; threadid < PID_MAX + MAX_NO_CPUS;
+ threadid++) {
+ thread = getthread(threadid);
+ if (thread) {
+ nothreads += int_to_hex_v(
+ &remcomOutBuffer[
+ nothreads],
+ threadid);
+ if (thread_min > threadid)
+ thread_min = threadid;
+ remcomOutBuffer[
+ nothreads] = ',';
+ nothreads++;
+ if (nothreads > BUFMAX - 10)
+ break;
+ }
+ }
+ if (remcomOutBuffer[nothreads - 1] == 'm') {
+ remcomOutBuffer[nothreads - 1] = 'l';
+ } else {
+ nothreads--;
+ }
+ remcomOutBuffer[nothreads] = 0;
+ break;
+
+#ifdef old_thread_list /* Old thread info request */
+ case 'L':
+ /* List threads */
+ thread_list = 2;
+ thread_list_start = (usethread ? : current);
+ unpack_byte(remcomInBuffer + 3, &maxthreads);
+ unpack_threadid(remcomInBuffer + 5, &thref);
+ do {
+ int buf_thread_limit =
+ (BUFMAX - 22) / BUF_THREAD_ID_SIZE;
+ if (maxthreads > buf_thread_limit) {
+ maxthreads = buf_thread_limit;
+ }
+ } while (0);
+ remcomOutBuffer[0] = 'q';
+ remcomOutBuffer[1] = 'M';
+ remcomOutBuffer[4] = '0';
+ pack_threadid(remcomOutBuffer + 5, &thref);
+
+ threadid = threadref_to_int(&thref);
+ for (nothreads = 0;
+ nothreads < maxthreads &&
+ threadid < PID_MAX + MAX_NO_CPUS;
+ threadid++) {
+ thread = getthread(threadid);
+ if (thread) {
+ int_to_threadref(&thref,
+ threadid);
+ pack_threadid(remcomOutBuffer +
+ 21 +
+ nothreads * 16,
+ &thref);
+ nothreads++;
+ if (thread_min > threadid)
+ thread_min = threadid;
+ }
+ }
+
+ if (threadid == PID_MAX + MAX_NO_CPUS) {
+ remcomOutBuffer[4] = '1';
+ }
+ pack_hex_byte(remcomOutBuffer + 2, nothreads);
+ remcomOutBuffer[21 + nothreads * 16] = '\0';
+ break;
+#endif
+ case 'C':
+ /* Current thread id */
+ remcomOutBuffer[0] = 'Q';
+ remcomOutBuffer[1] = 'C';
+ threadid = current->pid;
+ if (!threadid) {
+ /*
+ * idle thread
+ */
+ for (threadid = PID_MAX;
+ threadid < PID_MAX + MAX_NO_CPUS;
+ threadid++) {
+ if (current ==
+ idle_task(threadid -
+ PID_MAX))
+ break;
+ }
+ }
+ int_to_threadref(&thref, threadid);
+ pack_threadid(remcomOutBuffer + 2, &thref);
+ remcomOutBuffer[18] = '\0';
+ break;
+
+ case 'E':
+ /* Print exception info */
+ printexceptioninfo(exceptionVector,
+ err_code, remcomOutBuffer);
+ break;
+ case 'T':{
+ char * nptr;
+ /* Thread extra info */
+ if (!cmp_str(&remcomInBuffer[2],
+ "hreadExtraInfo,", 15)) {
+ break;
+ }
+ ptr = &remcomInBuffer[17];
+ hexToInt(&ptr, &threadid);
+ thread = getthread(threadid);
+ nptr = &thread->comm[0];
+ length = 0;
+ ptr = &remcomOutBuffer[0];
+ do {
+ length++;
+ ptr = pack_hex_byte(ptr, *nptr++);
+ } while (*nptr && length < 16);
+ /*
+ * would like that 16 to be the size of
+ * task_struct.comm but don't know the
+ * syntax..
+ */
+ *ptr = 0;
+ }
+ }
+ break;
+
+ /* task related */
+ case 'H':
+ switch (remcomInBuffer[1]) {
+ case 'g':
+ ptr = &remcomInBuffer[2];
+ hexToInt(&ptr, &threadid);
+ thread = getthread(threadid);
+ if (!thread) {
+ remcomOutBuffer[0] = 'E';
+ remcomOutBuffer[1] = '\0';
+ break;
+ }
+ /*
+ * Just in case I forget what this is all about,
+ * the "thread info" command to gdb causes it
+ * to ask for a thread list. It then switches
+ * to each thread and asks for the registers.
+ * For this (and only this) usage, we want to
+ * fudge the registers of tasks not on the run
+ * list (i.e. waiting) to show the routine that
+ * called schedule. Also, gdb, is a minimalist
+ * in that if the current thread is the last
+ * it will not re-read the info when done.
+ * This means that in this case we must show
+ * the real registers. So here is how we do it:
+ * Each entry we keep track of the min
+ * thread in the list (the last that gdb will)
+ * get info for. We also keep track of the
+ * starting thread.
+ * "thread_list" is cleared when switching back
+ * to the min thread if it is was current, or
+ * if it was not current, thread_list is set
+ * to 1. When the switch to current comes,
+ * if thread_list is 1, clear it, else do
+ * nothing.
+ */
+ usethread = thread;
+ if ((thread_list == 1) &&
+ (thread == thread_list_start)) {
+ thread_list = 0;
+ }
+ if (thread_list && (threadid == thread_min)) {
+ if (thread == thread_list_start) {
+ thread_list = 0;
+ } else {
+ thread_list = 1;
+ }
+ }
+ /* follow through */
+ case 'c':
+ remcomOutBuffer[0] = 'O';
+ remcomOutBuffer[1] = 'K';
+ remcomOutBuffer[2] = '\0';
+ break;
+ }
+ break;
+
+ /* Query thread status */
+ case 'T':
+ ptr = &remcomInBuffer[1];
+ hexToInt(&ptr, &threadid);
+ thread = getthread(threadid);
+ if (thread) {
+ remcomOutBuffer[0] = 'O';
+ remcomOutBuffer[1] = 'K';
+ remcomOutBuffer[2] = '\0';
+ if (thread_min > threadid)
+ thread_min = threadid;
+ } else {
+ remcomOutBuffer[0] = 'E';
+ remcomOutBuffer[1] = '\0';
+ }
+ break;
+
+ case 'Y': /* set up a hardware breakpoint */
+ ptr = &remcomInBuffer[1];
+ hexToInt(&ptr, &breakno);
+ ptr++;
+ hexToInt(&ptr, &breaktype);
+ ptr++;
+ hexToInt(&ptr, &length);
+ ptr++;
+ hexToInt(&ptr, &addr);
+ if (set_hw_break(breakno & 0x3,
+ breaktype & 0x3,
+ length & 0x3, addr) == 0) {
+ strcpy(remcomOutBuffer, "OK");
+ } else {
+ strcpy(remcomOutBuffer, "ERROR");
+ }
+ break;
+
+ /* Remove hardware breakpoint */
+ case 'y':
+ ptr = &remcomInBuffer[1];
+ hexToInt(&ptr, &breakno);
+ if (remove_hw_break(breakno & 0x3) == 0) {
+ strcpy(remcomOutBuffer, "OK");
+ } else {
+ strcpy(remcomOutBuffer, "ERROR");
+ }
+ break;
+
+ case 'r': /* reboot */
+ strcpy(remcomOutBuffer, "OK");
+ putpacket(remcomOutBuffer);
+ /*to_gdb("Rebooting\n"); */
+ /* triplefault no return from here */
+ {
+ static long no_idt[2];
+ __asm__ __volatile__("lidt %0"::"m"(no_idt[0]));
+ BREAKPOINT;
+ }
+
+ } /* switch */
+
+ /* reply to the request */
+ putpacket(remcomOutBuffer);
+ } /* while(1==1) */
+ /*
+ * reached by goto only.
+ */
+ exit_kgdb:
+ /*
+ * Here is where we set up to trap a gdb function call. NEW_esp
+ * will be changed if we are trying to do this. We handle both
+ * adding and subtracting, thus allowing gdb to put grung on
+ * the stack which it removes later.
+ */
+ if (NEW_esp != OLD_esp) {
+ int *ptr = END_OF_LOOKASIDE;
+ if (NEW_esp < OLD_esp)
+ ptr -= (OLD_esp - NEW_esp) / sizeof (int);
+ *--ptr = linux_regs->eflags;
+ *--ptr = linux_regs->xcs;
+ *--ptr = linux_regs->eip;
+ *--ptr = linux_regs->ecx;
+ *--ptr = linux_regs->ebx;
+ *--ptr = linux_regs->eax;
+ linux_regs->ecx = NEW_esp - (sizeof (int) * 6);
+ linux_regs->ebx = (unsigned int) END_OF_LOOKASIDE;
+ if (NEW_esp < OLD_esp) {
+ linux_regs->eip = (unsigned int) fn_call_stub;
+ } else {
+ linux_regs->eip = (unsigned int) fn_rtn_stub;
+ linux_regs->eax = NEW_esp;
+ }
+ linux_regs->eflags &= ~(IF_BIT | TF_BIT);
+ }
+#ifdef CONFIG_SMP
+ /*
+ * Release gdb wait locks
+ * Sanity check time. Must have at least one cpu to run. Also single
+ * step must not be done if the current cpu is on hold.
+ */
+ if (spinlock_count == 1) {
+ int ss_hold = (regs.eflags & 0x100) && kgdb_info.hold_on_sstep;
+ int cpu_avail = 0;
+ int i;
+
+ for (i = 0; i < MAX_NO_CPUS; i++) {
+ if (!cpu_online(i))
+ break;
+ if (!hold_cpu(i)) {
+ cpu_avail = 1;
+ }
+ }
+ /*
+ * Early in the bring up there will be NO cpus on line...
+ */
+ if (!cpu_avail && !cpus_empty(cpu_online_map)) {
+ to_gdb("No cpus unblocked, see 'kgdb_info.hold_cpu'\n");
+ goto once_again;
+ }
+ if (hold_cpu(smp_processor_id()) && (regs.eflags & 0x100)) {
+ to_gdb
+ ("Current cpu must be unblocked to single step\n");
+ goto once_again;
+ }
+ if (!(ss_hold)) {
+ int i;
+ for (i = 0; i < MAX_NO_CPUS; i++) {
+ if (!hold_cpu(i)) {
+ spin_unlock(&waitlocks[i]);
+ }
+ }
+ } else {
+ spin_unlock(&waitlocks[smp_processor_id()]);
+ }
+ /* Release kgdb spinlock */
+ KGDB_SPIN_UNLOCK(&kgdb_spinlock);
+ /*
+ * If this cpu is on hold, this is where we
+ * do it. Note, the NMI will pull us out of here,
+ * but will return as the above lock is not held.
+ * We will stay here till another cpu releases the lock for us.
+ */
+ spin_unlock_wait(waitlocks + smp_processor_id());
+ kgdb_local_irq_restore(flags);
+ return (0);
+ }
+#if 0
+exit_just_unlock:
+#endif
+#endif
+ /* Release kgdb spinlock */
+ KGDB_SPIN_UNLOCK(&kgdb_spinlock);
+ kgdb_local_irq_restore(flags);
+ return (0);
+}
+
+/* this function is used to set up exception handlers for tracing and
+ * breakpoints.
+ * This function is not needed as the above line does all that is needed.
+ * We leave it for backward compatitability...
+ */
+void
+set_debug_traps(void)
+{
+ /*
+ * linux_debug_hook is defined in traps.c. We store a pointer
+ * to our own exception handler into it.
+
+ * But really folks, every hear of labeled common, an old Fortran
+ * concept. Lots of folks can reference it and it is define if
+ * anyone does. Only one can initialize it at link time. We do
+ * this with the hook. See the statement above. No need for any
+ * executable code and it is ready as soon as the kernel is
+ * loaded. Very desirable in kernel debugging.
+
+ linux_debug_hook = handle_exception ;
+ */
+
+ /* In case GDB is started before us, ack any packets (presumably
+ "$?#xx") sitting there.
+ putDebugChar ('+');
+
+ initialized = 1;
+ */
+}
+
+/* This function will generate a breakpoint exception. It is used at the
+ beginning of a program to sync up with a debugger and can be used
+ otherwise as a quick means to stop program execution and "break" into
+ the debugger. */
+/* But really, just use the BREAKPOINT macro. We will handle the int stuff
+ */
+
+#ifdef later
+/*
+ * possibly we should not go thru the traps.c code at all? Someday.
+ */
+void
+do_kgdb_int3(struct pt_regs *regs, long error_code)
+{
+ kgdb_handle_exception(3, 5, error_code, regs);
+ return;
+}
+#endif
+#undef regs
+#ifdef CONFIG_TRAP_BAD_SYSCALL_EXITS
+asmlinkage void
+bad_sys_call_exit(int stuff)
+{
+ struct pt_regs *regs = (struct pt_regs *) &stuff;
+ printk("Sys call %d return with %x preempt_count\n",
+ (int) regs->orig_eax, preempt_count());
+}
+#endif
+#ifdef CONFIG_STACK_OVERFLOW_TEST
+#include <asm/kgdb.h>
+asmlinkage void
+stack_overflow(void)
+{
+#ifdef BREAKPOINT
+ BREAKPOINT;
+#else
+ printk("Kernel stack overflow, looping forever\n");
+#endif
+ while (1) {
+ }
+}
+#endif
+
+#if defined(CONFIG_SMP) || defined(CONFIG_KGDB_CONSOLE)
+char gdbconbuf[BUFMAX];
+
+static void
+kgdb_gdb_message(const char *s, unsigned count)
+{
+ int i;
+ int wcount;
+ char *bufptr;
+ /*
+ * This takes care of NMI while spining out chars to gdb
+ */
+ IF_SMP(in_kgdb_console = 1);
+ gdbconbuf[0] = 'O';
+ bufptr = gdbconbuf + 1;
+ while (count > 0) {
+ if ((count << 1) > (BUFMAX - 2)) {
+ wcount = (BUFMAX - 2) >> 1;
+ } else {
+ wcount = count;
+ }
+ count -= wcount;
+ for (i = 0; i < wcount; i++) {
+ bufptr = pack_hex_byte(bufptr, s[i]);
+ }
+ *bufptr = '\0';
+ s += wcount;
+
+ putpacket(gdbconbuf);
+
+ }
+ IF_SMP(in_kgdb_console = 0);
+}
+#endif
+#ifdef CONFIG_SMP
+static void
+to_gdb(const char *s)
+{
+ int count = 0;
+ while (s[count] && (count++ < BUFMAX)) ;
+ kgdb_gdb_message(s, count);
+}
+#endif
+#ifdef CONFIG_KGDB_CONSOLE
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+#include <asm/semaphore.h>
+
+void
+kgdb_console_write(struct console *co, const char *s, unsigned count)
+{
+
+ if (gdb_i386vector == -1) {
+ /*
+ * We have not yet talked to gdb. What to do...
+ * lets break, on continue we can do the write.
+ * But first tell him whats up. Uh, well no can do,
+ * as this IS the console. Oh well...
+ * We do need to wait or the messages will be lost.
+ * Other option would be to tell the above code to
+ * ignore this breakpoint and do an auto return,
+ * but that might confuse gdb. Also this happens
+ * early enough in boot up that we don't have the traps
+ * set up yet, so...
+ */
+ breakpoint();
+ }
+ kgdb_gdb_message(s, count);
+}
+
+/*
+ * ------------------------------------------------------------
+ * Serial KGDB driver
+ * ------------------------------------------------------------
+ */
+
+static struct console kgdbcons = {
+ name:"kgdb",
+ write:kgdb_console_write,
+#ifdef CONFIG_KGDB_USER_CONSOLE
+ device:kgdb_console_device,
+#endif
+ flags:CON_PRINTBUFFER | CON_ENABLED,
+ index:-1,
+};
+
+/*
+ * The trick here is that this file gets linked before printk.o
+ * That means we get to peer at the console info in the command
+ * line before it does. If we are up, we register, otherwise,
+ * do nothing. By returning 0, we allow printk to look also.
+ */
+static int kgdb_console_enabled;
+
+int __init
+kgdb_console_init(char *str)
+{
+ if ((strncmp(str, "kgdb", 4) == 0) || (strncmp(str, "gdb", 3) == 0)) {
+ register_console(&kgdbcons);
+ kgdb_console_enabled = 1;
+ }
+ return 0; /* let others look at the string */
+}
+
+__setup("console=", kgdb_console_init);
+
+#ifdef CONFIG_KGDB_USER_CONSOLE
+static kdev_t kgdb_console_device(struct console *c);
+/* This stuff sort of works, but it knocks out telnet devices
+ * we are leaving it here in case we (or you) find time to figure it out
+ * better..
+ */
+
+/*
+ * We need a real char device as well for when the console is opened for user
+ * space activities.
+ */
+
+static int
+kgdb_consdev_open(struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
+static ssize_t
+kgdb_consdev_write(struct file *file, const char *buf,
+ size_t count, loff_t * ppos)
+{
+ int size, ret = 0;
+ static char kbuf[128];
+ static DECLARE_MUTEX(sem);
+
+ /* We are not reentrant... */
+ if (down_interruptible(&sem))
+ return -ERESTARTSYS;
+
+ while (count > 0) {
+ /* need to copy the data from user space */
+ size = count;
+ if (size > sizeof (kbuf))
+ size = sizeof (kbuf);
+ if (copy_from_user(kbuf, buf, size)) {
+ ret = -EFAULT;
+ break;;
+ }
+ kgdb_console_write(&kgdbcons, kbuf, size);
+ count -= size;
+ ret += size;
+ buf += size;
+ }
+
+ up(&sem);
+
+ return ret;
+}
+
+struct file_operations kgdb_consdev_fops = {
+ open:kgdb_consdev_open,
+ write:kgdb_consdev_write
+};
+static kdev_t
+kgdb_console_device(struct console *c)
+{
+ return MKDEV(TTYAUX_MAJOR, 1);
+}
+
+/*
+ * This routine gets called from the serial stub in the i386/lib
+ * This is so it is done late in bring up (just before the console open).
+ */
+void
+kgdb_console_finit(void)
+{
+ if (kgdb_console_enabled) {
+ char *cptr = cdevname(MKDEV(TTYAUX_MAJOR, 1));
+ char *cp = cptr;
+ while (*cptr && *cptr != '(')
+ cptr++;
+ *cptr = 0;
+ unregister_chrdev(TTYAUX_MAJOR, cp);
+ register_chrdev(TTYAUX_MAJOR, "kgdb", &kgdb_consdev_fops);
+ }
+}
+#endif
+#endif
+#ifdef CONFIG_KGDB_TS
+#include <asm/msr.h> /* time stamp code */
+#include <asm/hardirq.h> /* in_interrupt */
+#ifdef CONFIG_KGDB_TS_64
+#define DATA_POINTS 64
+#endif
+#ifdef CONFIG_KGDB_TS_128
+#define DATA_POINTS 128
+#endif
+#ifdef CONFIG_KGDB_TS_256
+#define DATA_POINTS 256
+#endif
+#ifdef CONFIG_KGDB_TS_512
+#define DATA_POINTS 512
+#endif
+#ifdef CONFIG_KGDB_TS_1024
+#define DATA_POINTS 1024
+#endif
+#ifndef DATA_POINTS
+#define DATA_POINTS 128 /* must be a power of two */
+#endif
+#define INDEX_MASK (DATA_POINTS - 1)
+#if (INDEX_MASK & DATA_POINTS)
+#error "CONFIG_KGDB_TS_COUNT must be a power of 2"
+#endif
+struct kgdb_and_then_struct {
+#ifdef CONFIG_SMP
+ int on_cpu;
+#endif
+ struct task_struct *task;
+ long long at_time;
+ int from_ln;
+ char *in_src;
+ void *from;
+ int *with_shpf;
+ int data0;
+ int data1;
+};
+struct kgdb_and_then_struct2 {
+#ifdef CONFIG_SMP
+ int on_cpu;
+#endif
+ struct task_struct *task;
+ long long at_time;
+ int from_ln;
+ char *in_src;
+ void *from;
+ int *with_shpf;
+ struct task_struct *t1;
+ struct task_struct *t2;
+};
+struct kgdb_and_then_struct kgdb_data[DATA_POINTS];
+
+struct kgdb_and_then_struct *kgdb_and_then = &kgdb_data[0];
+int kgdb_and_then_count;
+
+void
+kgdb_tstamp(int line, char *source, int data0, int data1)
+{
+ static spinlock_t ts_spin = SPIN_LOCK_UNLOCKED;
+ int flags;
+ kgdb_local_irq_save(flags);
+ spin_lock(&ts_spin);
+ rdtscll(kgdb_and_then->at_time);
+#ifdef CONFIG_SMP
+ kgdb_and_then->on_cpu = smp_processor_id();
+#endif
+ kgdb_and_then->task = current;
+ kgdb_and_then->from_ln = line;
+ kgdb_and_then->in_src = source;
+ kgdb_and_then->from = __builtin_return_address(0);
+ kgdb_and_then->with_shpf = (int *) (((flags & IF_BIT) >> 9) |
+ (preempt_count() << 8));
+ kgdb_and_then->data0 = data0;
+ kgdb_and_then->data1 = data1;
+ kgdb_and_then = &kgdb_data[++kgdb_and_then_count & INDEX_MASK];
+ spin_unlock(&ts_spin);
+ kgdb_local_irq_restore(flags);
+#ifdef CONFIG_PREEMPT
+
+#endif
+ return;
+}
+#endif
+typedef int gdb_debug_hook(int exceptionVector,
+ int signo, int err_code, struct pt_regs *linux_regs);
+gdb_debug_hook *linux_debug_hook = &kgdb_handle_exception; /* histerical reasons... */
--- diff/arch/i386/lib/kgdb_serial.c 1970-01-01 01:00:00.000000000 +0100
+++ source/arch/i386/lib/kgdb_serial.c 2004-10-04 22:35:21.000000000 +0100
@@ -0,0 +1,485 @@
+/*
+ * Serial interface GDB stub
+ *
+ * Written (hacked together) by David Grothe (dave@gcom.com)
+ * Modified to allow invokation early in boot see also
+ * kgdb.h for instructions by George Anzinger(george@mvista.com)
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/config.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/segment.h>
+#include <asm/bitops.h>
+#include <asm/system.h>
+#include <asm/kgdb_local.h>
+#ifdef CONFIG_KGDB_USER_CONSOLE
+extern void kgdb_console_finit(void);
+#endif
+#define PRNT_off
+#define TEST_EXISTANCE
+#ifdef PRNT
+#define dbprintk(s) printk s
+#else
+#define dbprintk(s)
+#endif
+#define TEST_INTERRUPT_off
+#ifdef TEST_INTERRUPT
+#define intprintk(s) printk s
+#else
+#define intprintk(s)
+#endif
+
+#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT)
+
+#define GDB_BUF_SIZE 512 /* power of 2, please */
+
+static char gdb_buf[GDB_BUF_SIZE];
+static int gdb_buf_in_inx;
+static atomic_t gdb_buf_in_cnt;
+static int gdb_buf_out_inx;
+
+struct async_struct *gdb_async_info;
+static int gdb_async_irq;
+
+#define outb_px(a,b) outb_p(b,a)
+
+static void program_uart(struct async_struct *info);
+static void write_char(struct async_struct *info, int chr);
+/*
+ * Get a byte from the hardware data buffer and return it
+ */
+static int
+read_data_bfr(struct async_struct *info)
+{
+ char it = inb_p(info->port + UART_LSR);
+
+ if (it & UART_LSR_DR)
+ return (inb_p(info->port + UART_RX));
+ /*
+ * If we have a framing error assume somebody messed with
+ * our uart. Reprogram it and send '-' both ways...
+ */
+ if (it & 0xc) {
+ program_uart(info);
+ write_char(info, '-');
+ return ('-');
+ }
+ return (-1);
+
+} /* read_data_bfr */
+
+/*
+ * Get a char if available, return -1 if nothing available.
+ * Empty the receive buffer first, then look at the interface hardware.
+
+ * Locking here is a bit of a problem. We MUST not lock out communication
+ * if we are trying to talk to gdb about a kgdb entry. ON the other hand
+ * we can loose chars in the console pass thru if we don't lock. It is also
+ * possible that we could hold the lock or be waiting for it when kgdb
+ * NEEDS to talk. Since kgdb locks down the world, it does not need locks.
+ * We do, of course have possible issues with interrupting a uart operation,
+ * but we will just depend on the uart status to help keep that straight.
+
+ */
+static spinlock_t uart_interrupt_lock = SPIN_LOCK_UNLOCKED;
+#ifdef CONFIG_SMP
+extern spinlock_t kgdb_spinlock;
+#endif
+
+static int
+read_char(struct async_struct *info)
+{
+ int chr;
+ unsigned long flags;
+ local_irq_save(flags);
+#ifdef CONFIG_SMP
+ if (!spin_is_locked(&kgdb_spinlock)) {
+ spin_lock(&uart_interrupt_lock);
+ }
+#endif
+ if (atomic_read(&gdb_buf_in_cnt) != 0) { /* intr routine has q'd chars */
+ chr = gdb_buf[gdb_buf_out_inx++];
+ gdb_buf_out_inx &= (GDB_BUF_SIZE - 1);
+ atomic_dec(&gdb_buf_in_cnt);
+ } else {
+ chr = read_data_bfr(info);
+ }
+#ifdef CONFIG_SMP
+ if (!spin_is_locked(&kgdb_spinlock)) {
+ spin_unlock(&uart_interrupt_lock);
+ }
+#endif
+ local_irq_restore(flags);
+ return (chr);
+}
+
+/*
+ * Wait until the interface can accept a char, then write it.
+ */
+static void
+write_char(struct async_struct *info, int chr)
+{
+ while (!(inb_p(info->port + UART_LSR) & UART_LSR_THRE)) ;
+
+ outb_p(chr, info->port + UART_TX);
+
+} /* write_char */
+
+/*
+ * Mostly we don't need a spinlock, but since the console goes
+ * thru here with interrutps on, well, we need to catch those
+ * chars.
+ */
+/*
+ * This is the receiver interrupt routine for the GDB stub.
+ * It will receive a limited number of characters of input
+ * from the gdb host machine and save them up in a buffer.
+ *
+ * When the gdb stub routine getDebugChar() is called it
+ * draws characters out of the buffer until it is empty and
+ * then reads directly from the serial port.
+ *
+ * We do not attempt to write chars from the interrupt routine
+ * since the stubs do all of that via putDebugChar() which
+ * writes one byte after waiting for the interface to become
+ * ready.
+ *
+ * The debug stubs like to run with interrupts disabled since,
+ * after all, they run as a consequence of a breakpoint in
+ * the kernel.
+ *
+ * Perhaps someone who knows more about the tty driver than I
+ * care to learn can make this work for any low level serial
+ * driver.
+ */
+static irqreturn_t
+gdb_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct async_struct *info;
+ unsigned long flags;
+
+ info = gdb_async_info;
+ if (!info || !info->tty || irq != gdb_async_irq)
+ return IRQ_NONE;
+
+ local_irq_save(flags);
+ spin_lock(&uart_interrupt_lock);
+ do {
+ int chr = read_data_bfr(info);
+ intprintk(("Debug char on int: %x hex\n", chr));
+ if (chr < 0)
+ continue;
+
+ if (chr == 3) { /* Ctrl-C means remote interrupt */
+ BREAKPOINT;
+ continue;
+ }
+
+ if (atomic_read(&gdb_buf_in_cnt) >= GDB_BUF_SIZE) {
+ /* buffer overflow tosses early char */
+ read_char(info);
+ }
+ gdb_buf[gdb_buf_in_inx++] = chr;
+ gdb_buf_in_inx &= (GDB_BUF_SIZE - 1);
+ } while (inb_p(info->port + UART_IIR) & UART_IIR_RDI);
+ spin_unlock(&uart_interrupt_lock);
+ local_irq_restore(flags);
+ return IRQ_HANDLED;
+} /* gdb_interrupt */
+
+/*
+ * Just a NULL routine for testing.
+ */
+void
+gdb_null(void)
+{
+} /* gdb_null */
+
+/* These structure are filled in with values defined in asm/kgdb_local.h
+ */
+static struct serial_state state = SB_STATE;
+static struct async_struct local_info = SB_INFO;
+static int ok_to_enable_ints = 0;
+static void kgdb_enable_ints_now(void);
+
+extern char *kgdb_version;
+/*
+ * Hook an IRQ for KGDB.
+ *
+ * This routine is called from putDebugChar, below.
+ */
+static int ints_disabled = 1;
+int
+gdb_hook_interrupt(struct async_struct *info, int verb)
+{
+ struct serial_state *state = info->state;
+ unsigned long flags;
+ int port;
+#ifdef TEST_EXISTANCE
+ int scratch, scratch2;
+#endif
+
+ /* The above fails if memory managment is not set up yet.
+ * Rather than fail the set up, just keep track of the fact
+ * and pick up the interrupt thing later.
+ */
+ gdb_async_info = info;
+ port = gdb_async_info->port;
+ gdb_async_irq = state->irq;
+ if (verb) {
+ printk("kgdb %s : port =%x, IRQ=%d, divisor =%d\n",
+ kgdb_version,
+ port,
+ gdb_async_irq, gdb_async_info->state->custom_divisor);
+ }
+ local_irq_save(flags);
+#ifdef TEST_EXISTANCE
+ /* Existance test */
+ /* Should not need all this, but just in case.... */
+
+ scratch = inb_p(port + UART_IER);
+ outb_px(port + UART_IER, 0);
+ outb_px(0xff, 0x080);
+ scratch2 = inb_p(port + UART_IER);
+ outb_px(port + UART_IER, scratch);
+ if (scratch2) {
+ printk
+ ("gdb_hook_interrupt: Could not clear IER, not a UART!\n");
+ local_irq_restore(flags);
+ return 1; /* We failed; there's nothing here */
+ }
+ scratch2 = inb_p(port + UART_LCR);
+ outb_px(port + UART_LCR, 0xBF); /* set up for StarTech test */
+ outb_px(port + UART_EFR, 0); /* EFR is the same as FCR */
+ outb_px(port + UART_LCR, 0);
+ outb_px(port + UART_FCR, UART_FCR_ENABLE_FIFO);
+ scratch = inb_p(port + UART_IIR) >> 6;
+ if (scratch == 1) {
+ printk("gdb_hook_interrupt: Undefined UART type!"
+ " Not a UART! \n");
+ local_irq_restore(flags);
+ return 1;
+ } else {
+ dbprintk(("gdb_hook_interrupt: UART type "
+ "is %d where 0=16450, 2=16550 3=16550A\n", scratch));
+ }
+ scratch = inb_p(port + UART_MCR);
+ outb_px(port + UART_MCR, UART_MCR_LOOP | scratch);
+ outb_px(port + UART_MCR, UART_MCR_LOOP | 0x0A);
+ scratch2 = inb_p(port + UART_MSR) & 0xF0;
+ outb_px(port + UART_MCR, scratch);
+ if (scratch2 != 0x90) {
+ printk("gdb_hook_interrupt: "
+ "Loop back test failed! Not a UART!\n");
+ local_irq_restore(flags);
+ return scratch2 + 1000; /* force 0 to fail */
+ }
+#endif /* test existance */
+ program_uart(info);
+ local_irq_restore(flags);
+
+ return (0);
+
+} /* gdb_hook_interrupt */
+
+static void
+program_uart(struct async_struct *info)
+{
+ int port = info->port;
+
+ (void) inb_p(port + UART_RX);
+ outb_px(port + UART_IER, 0);
+
+ (void) inb_p(port + UART_RX); /* serial driver comments say */
+ (void) inb_p(port + UART_IIR); /* this clears the interrupt regs */
+ (void) inb_p(port + UART_MSR);
+ outb_px(port + UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB);
+ outb_px(port + UART_DLL, info->state->custom_divisor & 0xff); /* LS */
+ outb_px(port + UART_DLM, info->state->custom_divisor >> 8); /* MS */
+ outb_px(port + UART_MCR, info->MCR);
+
+ outb_px(port + UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1 | UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR); /* set fcr */
+ outb_px(port + UART_LCR, UART_LCR_WLEN8); /* reset DLAB */
+ outb_px(port + UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1); /* set fcr */
+ if (!ints_disabled) {
+ intprintk(("KGDB: Sending %d to port %x offset %d\n",
+ gdb_async_info->IER,
+ (int) gdb_async_info->port, UART_IER));
+ outb_px(gdb_async_info->port + UART_IER, gdb_async_info->IER);
+ }
+ return;
+}
+
+/*
+ * getDebugChar
+ *
+ * This is a GDB stub routine. It waits for a character from the
+ * serial interface and then returns it. If there is no serial
+ * interface connection then it returns a bogus value which will
+ * almost certainly cause the system to hang. In the
+ */
+int kgdb_in_isr = 0;
+int kgdb_in_lsr = 0;
+extern spinlock_t kgdb_spinlock;
+
+/* Caller takes needed protections */
+
+int
+getDebugChar(void)
+{
+ volatile int chr, dum, time, end_time;
+
+ dbprintk(("getDebugChar(port %x): ", gdb_async_info->port));
+
+ if (gdb_async_info == NULL) {
+ gdb_hook_interrupt(&local_info, 0);
+ }
+ /*
+ * This trick says if we wait a very long time and get
+ * no char, return the -1 and let the upper level deal
+ * with it.
+ */
+ rdtsc(dum, time);
+ end_time = time + 2;
+ while (((chr = read_char(gdb_async_info)) == -1) &&
+ (end_time - time) > 0) {
+ rdtsc(dum, time);
+ };
+ /*
+ * This covers our butts if some other code messes with
+ * our uart, hay, it happens :o)
+ */
+ if (chr == -1)
+ program_uart(gdb_async_info);
+
+ dbprintk(("%c\n", chr > ' ' && chr < 0x7F ? chr : ' '));
+ return (chr);
+
+} /* getDebugChar */
+
+static int count = 3;
+static spinlock_t one_at_atime = SPIN_LOCK_UNLOCKED;
+
+static int __init
+kgdb_enable_ints(void)
+{
+ if (gdb_async_info == NULL) {
+ gdb_hook_interrupt(&local_info, 1);
+ }
+ ok_to_enable_ints = 1;
+ kgdb_enable_ints_now();
+#ifdef CONFIG_KGDB_USER_CONSOLE
+ kgdb_console_finit();
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_SERIAL_8250
+void shutdown_for_kgdb(struct async_struct *gdb_async_info);
+#endif
+
+#ifdef CONFIG_DISCONTIGMEM
+static inline int kgdb_mem_init_done(void)
+{
+ return highmem_start_page != NULL;
+}
+#else
+static inline int kgdb_mem_init_done(void)
+{
+ return max_mapnr != 0;
+}
+#endif
+
+static void
+kgdb_enable_ints_now(void)
+{
+ if (!spin_trylock(&one_at_atime))
+ return;
+ if (!ints_disabled)
+ goto exit;
+ if (kgdb_mem_init_done() &&
+ ints_disabled) { /* don't try till mem init */
+#ifdef CONFIG_SERIAL_8250
+ /*
+ * The ifdef here allows the system to be configured
+ * without the serial driver.
+ * Don't make it a module, however, it will steal the port
+ */
+ shutdown_for_kgdb(gdb_async_info);
+#endif
+ ints_disabled = request_irq(gdb_async_info->state->irq,
+ gdb_interrupt,
+ IRQ_T(gdb_async_info),
+ "KGDB-stub", NULL);
+ intprintk(("KGDB: request_irq returned %d\n", ints_disabled));
+ }
+ if (!ints_disabled) {
+ intprintk(("KGDB: Sending %d to port %x offset %d\n",
+ gdb_async_info->IER,
+ (int) gdb_async_info->port, UART_IER));
+ outb_px(gdb_async_info->port + UART_IER, gdb_async_info->IER);
+ }
+ exit:
+ spin_unlock(&one_at_atime);
+}
+
+/*
+ * putDebugChar
+ *
+ * This is a GDB stub routine. It waits until the interface is ready
+ * to transmit a char and then sends it. If there is no serial
+ * interface connection then it simply returns to its caller, having
+ * pretended to send the char. Caller takes needed protections.
+ */
+void
+putDebugChar(int chr)
+{
+ dbprintk(("putDebugChar(port %x): chr=%02x '%c', ints_on=%d\n",
+ gdb_async_info->port,
+ chr,
+ chr > ' ' && chr < 0x7F ? chr : ' ', ints_disabled ? 0 : 1));
+
+ if (gdb_async_info == NULL) {
+ gdb_hook_interrupt(&local_info, 0);
+ }
+
+ write_char(gdb_async_info, chr); /* this routine will wait */
+ count = (chr == '#') ? 0 : count + 1;
+ if ((count == 2)) { /* try to enable after */
+ if (ints_disabled & ok_to_enable_ints)
+ kgdb_enable_ints_now(); /* try to enable after */
+
+ /* We do this a lot because, well we really want to get these
+ * interrupts. The serial driver will clear these bits when it
+ * initializes the chip. Every thing else it does is ok,
+ * but this.
+ */
+ if (!ints_disabled) {
+ outb_px(gdb_async_info->port + UART_IER,
+ gdb_async_info->IER);
+ }
+ }
+
+} /* putDebugChar */
+
+module_init(kgdb_enable_ints);
--- diff/include/asm-i386/kgdb.h 1970-01-01 01:00:00.000000000 +0100
+++ source/include/asm-i386/kgdb.h 2004-10-04 22:35:21.000000000 +0100
@@ -0,0 +1,59 @@
+#ifndef __KGDB
+#define __KGDB
+
+/*
+ * This file should not include ANY others. This makes it usable
+ * most anywhere without the fear of include order or inclusion.
+ * Make it so!
+ *
+ * This file may be included all the time. It is only active if
+ * CONFIG_KGDB is defined, otherwise it stubs out all the macros
+ * and entry points.
+ */
+#if defined(CONFIG_KGDB) && !defined(__ASSEMBLY__)
+
+extern void breakpoint(void);
+#define INIT_KGDB_INTS kgdb_enable_ints()
+
+#ifndef BREAKPOINT
+#define BREAKPOINT asm(" int $3")
+#endif
+/*
+ * GDB debug stub (or any debug stub) can point the 'linux_debug_hook'
+ * pointer to its routine and it will be entered as the first thing
+ * when a trap occurs.
+ *
+ * Return values are, at present, undefined.
+ *
+ * The debug hook routine does not necessarily return to its caller.
+ * It has the register image and thus may choose to resume execution
+ * anywhere it pleases.
+ */
+struct pt_regs;
+
+extern int kgdb_handle_exception(int trapno,
+ int signo, int err_code, struct pt_regs *regs);
+extern int in_kgdb(struct pt_regs *regs);
+
+#ifdef CONFIG_KGDB_TS
+void kgdb_tstamp(int line, char *source, int data0, int data1);
+/*
+ * This is the time stamp function. The macro adds the source info and
+ * does a cast on the data to allow most any 32-bit value.
+ */
+
+#define kgdb_ts(data0,data1) kgdb_tstamp(__LINE__,__FILE__,(int)data0,(int)data1)
+#else
+#define kgdb_ts(data0,data1)
+#endif
+#else /* CONFIG_KGDB && ! __ASSEMBLY__ ,stubs follow... */
+#ifndef BREAKPOINT
+#define BREAKPOINT
+#endif
+#define kgdb_ts(data0,data1)
+#define in_kgdb
+#define kgdb_handle_exception
+#define breakpoint
+#define INIT_KGDB_INTS
+#endif
+#endif /* __KGDB */
--- diff/include/asm-i386/kgdb_local.h 1970-01-01 01:00:00.000000000 +0100
+++ source/include/asm-i386/kgdb_local.h 2004-10-04 22:35:22.000000000 +0100
@@ -0,0 +1,102 @@
+#ifndef __KGDB_LOCAL
+#define ___KGDB_LOCAL
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/spinlock.h>
+#include <asm/processor.h>
+#include <asm/msr.h>
+#include <asm/kgdb.h>
+
+#define PORT 0x3f8
+#ifdef CONFIG_KGDB_PORT
+#undef PORT
+#define PORT CONFIG_KGDB_PORT
+#endif
+#define IRQ 4
+#ifdef CONFIG_KGDB_IRQ
+#undef IRQ
+#define IRQ CONFIG_KGDB_IRQ
+#endif
+#define SB_CLOCK 1843200
+#define SB_BASE (SB_CLOCK/16)
+#define SB_BAUD9600 SB_BASE/9600
+#define SB_BAUD192 SB_BASE/19200
+#define SB_BAUD384 SB_BASE/38400
+#define SB_BAUD576 SB_BASE/57600
+#define SB_BAUD1152 SB_BASE/115200
+#ifdef CONFIG_KGDB_9600BAUD
+#define SB_BAUD SB_BAUD9600
+#endif
+#ifdef CONFIG_KGDB_19200BAUD
+#define SB_BAUD SB_BAUD192
+#endif
+#ifdef CONFIG_KGDB_38400BAUD
+#define SB_BAUD SB_BAUD384
+#endif
+#ifdef CONFIG_KGDB_57600BAUD
+#define SB_BAUD SB_BAUD576
+#endif
+#ifdef CONFIG_KGDB_115200BAUD
+#define SB_BAUD SB_BAUD1152
+#endif
+#ifndef SB_BAUD
+#define SB_BAUD SB_BAUD1152 /* Start with this if not given */
+#endif
+
+#ifndef CONFIG_X86_TSC
+#undef rdtsc
+#define rdtsc(a,b) if (a++ > 10000){a = 0; b++;}
+#undef rdtscll
+#define rdtscll(s) s++
+#endif
+
+#ifdef _raw_read_unlock /* must use a name that is "define"ed, not an inline */
+#undef spin_lock
+#undef spin_trylock
+#undef spin_unlock
+#define spin_lock _raw_spin_lock
+#define spin_trylock _raw_spin_trylock
+#define spin_unlock _raw_spin_unlock
+#else
+#endif
+#undef spin_unlock_wait
+#define spin_unlock_wait(x) do { cpu_relax(); barrier();} \
+ while(spin_is_locked(x))
+
+#define SB_IER 1
+#define SB_MCR UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS
+
+#define FLAGS 0
+#define SB_STATE { \
+ magic: SSTATE_MAGIC, \
+ baud_base: SB_BASE, \
+ port: PORT, \
+ irq: IRQ, \
+ flags: FLAGS, \
+ custom_divisor:SB_BAUD}
+#define SB_INFO { \
+ magic: SERIAL_MAGIC, \
+ port: PORT,0,FLAGS, \
+ state: &state, \
+ tty: (struct tty_struct *)&state, \
+ IER: SB_IER, \
+ MCR: SB_MCR}
+extern void putDebugChar(int);
+/* RTAI support needs us to really stop/start interrupts */
+
+#define kgdb_sti() __asm__ __volatile__("sti": : :"memory")
+#define kgdb_cli() __asm__ __volatile__("cli": : :"memory")
+#define kgdb_local_save_flags(x) __asm__ __volatile__(\
+ "pushfl ; popl %0":"=g" (x): /* no input */)
+#define kgdb_local_irq_restore(x) __asm__ __volatile__(\
+ "pushl %0 ; popfl": \
+ /* no output */ :"g" (x):"memory", "cc")
+#define kgdb_local_irq_save(x) kgdb_local_save_flags(x); kgdb_cli()
+
+#ifdef CONFIG_SERIAL
+extern void shutdown_for_kgdb(struct async_struct *info);
+#endif
+#define INIT_KDEBUG putDebugChar("+");
+#endif /* __KGDB_LOCAL */
--- diff/include/linux/dwarf2-lang.h 1970-01-01 01:00:00.000000000 +0100
+++ source/include/linux/dwarf2-lang.h 2004-10-04 22:35:22.000000000 +0100
@@ -0,0 +1,132 @@
+#ifndef DWARF2_LANG
+#define DWARF2_LANG
+#include <linux/dwarf2.h>
+
+/*
+ * This is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2, or (at your option) any later
+ * version.
+ */
+/*
+ * This file defines macros that allow generation of DWARF debug records
+ * for asm files. This file is platform independent. Register numbers
+ * (which are about the only thing that is platform dependent) are to be
+ * supplied by a platform defined file.
+ */
+#define DWARF_preamble() .section .debug_frame,"",@progbits
+/*
+ * This macro starts a debug frame section. The debug_frame describes
+ * where to find the registers that the enclosing function saved on
+ * entry.
+ *
+ * ORD is use by the label generator and should be the same as what is
+ * passed to CFI_postamble.
+ *
+ * pc, pc register gdb ordinal.
+ *
+ * code_align this is the factor used to define locations or regions
+ * where the given definitions apply. If you use labels to define these
+ * this should be 1.
+ *
+ * data_align this is the factor used to define register offsets. If
+ * you use struct offset, this should be the size of the register in
+ * bytes or the negative of that. This is how it is used: you will
+ * define a register as the reference register, say the stack pointer,
+ * then you will say where a register is located relative to this
+ * reference registers value, say 40 for register 3 (the gdb register
+ * number). The <40> will be multiplied by <data_align> to define the
+ * byte offset of the given register (3, in this example). So if your
+ * <40> is the byte offset and the reference register points at the
+ * begining, you would want 1 for the data_offset. If <40> was the 40th
+ * 4-byte element in that structure you would want 4. And if your
+ * reference register points at the end of the structure you would want
+ * a negative data_align value(and you would have to do other math as
+ * well).
+ */
+
+#define CFI_preamble(ORD, pc, code_align, data_align) \
+.section .debug_frame,"",@progbits ; \
+frame/**/_/**/ORD: \
+ .long end/**/_/**/ORD-start/**/_/**/ORD; \
+start/**/_/**/ORD: \
+ .long DW_CIE_ID; \
+ .byte DW_CIE_VERSION; \
+ .byte 0 ; \
+ .uleb128 code_align; \
+ .sleb128 data_align; \
+ .byte pc;
+
+/*
+ * After the above macro and prior to the CFI_postamble, you need to
+ * define the initial state. This starts with defining the reference
+ * register and, usually the pc. Here are some helper macros:
+ */
+
+#define CFA_define_reference(reg, offset) \
+ .byte DW_CFA_def_cfa; \
+ .uleb128 reg; \
+ .uleb128 (offset);
+
+#define CFA_define_offset(reg, offset) \
+ .byte (DW_CFA_offset + reg); \
+ .uleb128 (offset);
+
+#define CFI_postamble(ORD) \
+ .align 4; \
+end/**/_/**/ORD:
+/*
+ * So now your code pushs stuff on the stack, you need a new location
+ * and the rules for what to do. This starts a running description of
+ * the call frame. You need to describe what changes with respect to
+ * the call registers as the location of the pc moves through the code.
+ * The following builds an FDE (fram descriptor entry?). Like the
+ * above, it has a preamble and a postamble. It also is tied to the CFI
+ * above.
+ * The first entry after the preamble must be the location in the code
+ * that the call frame is being described for.
+ */
+#define FDE_preamble(ORD, fde_no, initial_address, length) \
+ .long FDE_end/**/_/**/fde_no-FDE_start/**/_/**/fde_no; \
+FDE_start/**/_/**/fde_no: \
+ .long frame/**/_/**/ORD; \
+ .long initial_address; \
+ .long length;
+
+#define FDE_postamble(fde_no) \
+ .align 4; \
+FDE_end/**/_/**/fde_no:
+/*
+ * That done, you can now add registers, subtract registers, move the
+ * reference and even change the reference. You can also define a new
+ * area of code the info applies to. For discontinuous bits you should
+ * start a new FDE. You may have as many as you like.
+ */
+
+/*
+ * To advance the address by <bytes>
+ */
+
+#define FDE_advance(bytes) \
+ .byte DW_CFA_advance_loc4 \
+ .long bytes
+
+
+
+/*
+ * With the above you can define all the register locations. But
+ * suppose the reference register moves... Takes the new offset NOT an
+ * increment. This is how esp is tracked if it is not saved.
+ */
+
+#define CFA_define_cfa_offset(offset) \
+ .byte $DW_CFA_def_cfa_offset; \
+ .uleb128 (offset);
+/*
+ * Or suppose you want to use a different reference register...
+ */
+#define CFA_define_cfa_register(reg) \
+ .byte DW_CFA_def_cfa_register; \
+ .uleb128 reg;
+
+#endif
--- diff/include/linux/dwarf2.h 1970-01-01 01:00:00.000000000 +0100
+++ source/include/linux/dwarf2.h 2004-10-04 22:35:22.000000000 +0100
@@ -0,0 +1,738 @@
+/* Declarations and definitions of codes relating to the DWARF2 symbolic
+ debugging information format.
+ Copyright (C) 1992, 1993, 1995, 1996, 1997, 1999, 2000, 2001, 2002
+ Free Software Foundation, Inc.
+
+ Written by Gary Funck (gary@intrepid.com) The Ada Joint Program
+ Office (AJPO), Florida State Unviversity and Silicon Graphics Inc.
+ provided support for this effort -- June 21, 1995.
+
+ Derived from the DWARF 1 implementation written by Ron Guilmette
+ (rfg@netcom.com), November 1990.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+
+/* This file is derived from the DWARF specification (a public document)
+ Revision 2.0.0 (July 27, 1993) developed by the UNIX International
+ Programming Languages Special Interest Group (UI/PLSIG) and distributed
+ by UNIX International. Copies of this specification are available from
+ UNIX International, 20 Waterview Boulevard, Parsippany, NJ, 07054.
+
+ This file also now contains definitions from the DWARF 3 specification. */
+
+/* This file is shared between GCC and GDB, and should not contain
+ prototypes. */
+
+#ifndef _ELF_DWARF2_H
+#define _ELF_DWARF2_H
+
+/* Structure found in the .debug_line section. */
+#ifndef __ASSEMBLY__
+typedef struct
+{
+ unsigned char li_length [4];
+ unsigned char li_version [2];
+ unsigned char li_prologue_length [4];
+ unsigned char li_min_insn_length [1];
+ unsigned char li_default_is_stmt [1];
+ unsigned char li_line_base [1];
+ unsigned char li_line_range [1];
+ unsigned char li_opcode_base [1];
+}
+DWARF2_External_LineInfo;
+
+typedef struct
+{
+ unsigned long li_length;
+ unsigned short li_version;
+ unsigned int li_prologue_length;
+ unsigned char li_min_insn_length;
+ unsigned char li_default_is_stmt;
+ int li_line_base;
+ unsigned char li_line_range;
+ unsigned char li_opcode_base;
+}
+DWARF2_Internal_LineInfo;
+
+/* Structure found in .debug_pubnames section. */
+typedef struct
+{
+ unsigned char pn_length [4];
+ unsigned char pn_version [2];
+ unsigned char pn_offset [4];
+ unsigned char pn_size [4];
+}
+DWARF2_External_PubNames;
+
+typedef struct
+{
+ unsigned long pn_length;
+ unsigned short pn_version;
+ unsigned long pn_offset;
+ unsigned long pn_size;
+}
+DWARF2_Internal_PubNames;
+
+/* Structure found in .debug_info section. */
+typedef struct
+{
+ unsigned char cu_length [4];
+ unsigned char cu_version [2];
+ unsigned char cu_abbrev_offset [4];
+ unsigned char cu_pointer_size [1];
+}
+DWARF2_External_CompUnit;
+
+typedef struct
+{
+ unsigned long cu_length;
+ unsigned short cu_version;
+ unsigned long cu_abbrev_offset;
+ unsigned char cu_pointer_size;
+}
+DWARF2_Internal_CompUnit;
+
+typedef struct
+{
+ unsigned char ar_length [4];
+ unsigned char ar_version [2];
+ unsigned char ar_info_offset [4];
+ unsigned char ar_pointer_size [1];
+ unsigned char ar_segment_size [1];
+}
+DWARF2_External_ARange;
+
+typedef struct
+{
+ unsigned long ar_length;
+ unsigned short ar_version;
+ unsigned long ar_info_offset;
+ unsigned char ar_pointer_size;
+ unsigned char ar_segment_size;
+}
+DWARF2_Internal_ARange;
+
+#define ENUM(name) enum name {
+#define IF_NOT_ASM(a) a
+#define COMMA ,
+#else
+#define ENUM(name)
+#define IF_NOT_ASM(a)
+#define COMMA
+
+#endif
+
+/* Tag names and codes. */
+ENUM(dwarf_tag)
+
+ DW_TAG_padding = 0x00 COMMA
+ DW_TAG_array_type = 0x01 COMMA
+ DW_TAG_class_type = 0x02 COMMA
+ DW_TAG_entry_point = 0x03 COMMA
+ DW_TAG_enumeration_type = 0x04 COMMA
+ DW_TAG_formal_parameter = 0x05 COMMA
+ DW_TAG_imported_declaration = 0x08 COMMA
+ DW_TAG_label = 0x0a COMMA
+ DW_TAG_lexical_block = 0x0b COMMA
+ DW_TAG_member = 0x0d COMMA
+ DW_TAG_pointer_type = 0x0f COMMA
+ DW_TAG_reference_type = 0x10 COMMA
+ DW_TAG_compile_unit = 0x11 COMMA
+ DW_TAG_string_type = 0x12 COMMA
+ DW_TAG_structure_type = 0x13 COMMA
+ DW_TAG_subroutine_type = 0x15 COMMA
+ DW_TAG_typedef = 0x16 COMMA
+ DW_TAG_union_type = 0x17 COMMA
+ DW_TAG_unspecified_parameters = 0x18 COMMA
+ DW_TAG_variant = 0x19 COMMA
+ DW_TAG_common_block = 0x1a COMMA
+ DW_TAG_common_inclusion = 0x1b COMMA
+ DW_TAG_inheritance = 0x1c COMMA
+ DW_TAG_inlined_subroutine = 0x1d COMMA
+ DW_TAG_module = 0x1e COMMA
+ DW_TAG_ptr_to_member_type = 0x1f COMMA
+ DW_TAG_set_type = 0x20 COMMA
+ DW_TAG_subrange_type = 0x21 COMMA
+ DW_TAG_with_stmt = 0x22 COMMA
+ DW_TAG_access_declaration = 0x23 COMMA
+ DW_TAG_base_type = 0x24 COMMA
+ DW_TAG_catch_block = 0x25 COMMA
+ DW_TAG_const_type = 0x26 COMMA
+ DW_TAG_constant = 0x27 COMMA
+ DW_TAG_enumerator = 0x28 COMMA
+ DW_TAG_file_type = 0x29 COMMA
+ DW_TAG_friend = 0x2a COMMA
+ DW_TAG_namelist = 0x2b COMMA
+ DW_TAG_namelist_item = 0x2c COMMA
+ DW_TAG_packed_type = 0x2d COMMA
+ DW_TAG_subprogram = 0x2e COMMA
+ DW_TAG_template_type_param = 0x2f COMMA
+ DW_TAG_template_value_param = 0x30 COMMA
+ DW_TAG_thrown_type = 0x31 COMMA
+ DW_TAG_try_block = 0x32 COMMA
+ DW_TAG_variant_part = 0x33 COMMA
+ DW_TAG_variable = 0x34 COMMA
+ DW_TAG_volatile_type = 0x35 COMMA
+ /* DWARF 3. */
+ DW_TAG_dwarf_procedure = 0x36 COMMA
+ DW_TAG_restrict_type = 0x37 COMMA
+ DW_TAG_interface_type = 0x38 COMMA
+ DW_TAG_namespace = 0x39 COMMA
+ DW_TAG_imported_module = 0x3a COMMA
+ DW_TAG_unspecified_type = 0x3b COMMA
+ DW_TAG_partial_unit = 0x3c COMMA
+ DW_TAG_imported_unit = 0x3d COMMA
+ /* SGI/MIPS Extensions. */
+ DW_TAG_MIPS_loop = 0x4081 COMMA
+ /* GNU extensions. */
+ DW_TAG_format_label = 0x4101 COMMA /* For FORTRAN 77 and Fortran 90. */
+ DW_TAG_function_template = 0x4102 COMMA /* For C++. */
+ DW_TAG_class_template = 0x4103 COMMA /* For C++. */
+ DW_TAG_GNU_BINCL = 0x4104 COMMA
+ DW_TAG_GNU_EINCL = 0x4105 COMMA
+ /* Extensions for UPC. See: http://upc.gwu.edu/~upc. */
+ DW_TAG_upc_shared_type = 0x8765 COMMA
+ DW_TAG_upc_strict_type = 0x8766 COMMA
+ DW_TAG_upc_relaxed_type = 0x8767
+IF_NOT_ASM(};)
+
+#define DW_TAG_lo_user 0x4080
+#define DW_TAG_hi_user 0xffff
+
+/* Flag that tells whether entry has a child or not. */
+#define DW_children_no 0
+#define DW_children_yes 1
+
+/* Form names and codes. */
+ENUM(dwarf_form)
+
+ DW_FORM_addr = 0x01 COMMA
+ DW_FORM_block2 = 0x03 COMMA
+ DW_FORM_block4 = 0x04 COMMA
+ DW_FORM_data2 = 0x05 COMMA
+ DW_FORM_data4 = 0x06 COMMA
+ DW_FORM_data8 = 0x07 COMMA
+ DW_FORM_string = 0x08 COMMA
+ DW_FORM_block = 0x09 COMMA
+ DW_FORM_block1 = 0x0a COMMA
+ DW_FORM_data1 = 0x0b COMMA
+ DW_FORM_flag = 0x0c COMMA
+ DW_FORM_sdata = 0x0d COMMA
+ DW_FORM_strp = 0x0e COMMA
+ DW_FORM_udata = 0x0f COMMA
+ DW_FORM_ref_addr = 0x10 COMMA
+ DW_FORM_ref1 = 0x11 COMMA
+ DW_FORM_ref2 = 0x12 COMMA
+ DW_FORM_ref4 = 0x13 COMMA
+ DW_FORM_ref8 = 0x14 COMMA
+ DW_FORM_ref_udata = 0x15 COMMA
+ DW_FORM_indirect = 0x16
+IF_NOT_ASM(};)
+
+/* Attribute names and codes. */
+
+ENUM(dwarf_attribute)
+
+ DW_AT_sibling = 0x01 COMMA
+ DW_AT_location = 0x02 COMMA
+ DW_AT_name = 0x03 COMMA
+ DW_AT_ordering = 0x09 COMMA
+ DW_AT_subscr_data = 0x0a COMMA
+ DW_AT_byte_size = 0x0b COMMA
+ DW_AT_bit_offset = 0x0c COMMA
+ DW_AT_bit_size = 0x0d COMMA
+ DW_AT_element_list = 0x0f COMMA
+ DW_AT_stmt_list = 0x10 COMMA
+ DW_AT_low_pc = 0x11 COMMA
+ DW_AT_high_pc = 0x12 COMMA
+ DW_AT_language = 0x13 COMMA
+ DW_AT_member = 0x14 COMMA
+ DW_AT_discr = 0x15 COMMA
+ DW_AT_discr_value = 0x16 COMMA
+ DW_AT_visibility = 0x17 COMMA
+ DW_AT_import = 0x18 COMMA
+ DW_AT_string_length = 0x19 COMMA
+ DW_AT_common_reference = 0x1a COMMA
+ DW_AT_comp_dir = 0x1b COMMA
+ DW_AT_const_value = 0x1c COMMA
+ DW_AT_containing_type = 0x1d COMMA
+ DW_AT_default_value = 0x1e COMMA
+ DW_AT_inline = 0x20 COMMA
+ DW_AT_is_optional = 0x21 COMMA
+ DW_AT_lower_bound = 0x22 COMMA
+ DW_AT_producer = 0x25 COMMA
+ DW_AT_prototyped = 0x27 COMMA
+ DW_AT_return_addr = 0x2a COMMA
+ DW_AT_start_scope = 0x2c COMMA
+ DW_AT_stride_size = 0x2e COMMA
+ DW_AT_upper_bound = 0x2f COMMA
+ DW_AT_abstract_origin = 0x31 COMMA
+ DW_AT_accessibility = 0x32 COMMA
+ DW_AT_address_class = 0x33 COMMA
+ DW_AT_artificial = 0x34 COMMA
+ DW_AT_base_types = 0x35 COMMA
+ DW_AT_calling_convention = 0x36 COMMA
+ DW_AT_count = 0x37 COMMA
+ DW_AT_data_member_location = 0x38 COMMA
+ DW_AT_decl_column = 0x39 COMMA
+ DW_AT_decl_file = 0x3a COMMA
+ DW_AT_decl_line = 0x3b COMMA
+ DW_AT_declaration = 0x3c COMMA
+ DW_AT_discr_list = 0x3d COMMA
+ DW_AT_encoding = 0x3e COMMA
+ DW_AT_external = 0x3f COMMA
+ DW_AT_frame_base = 0x40 COMMA
+ DW_AT_friend = 0x41 COMMA
+ DW_AT_identifier_case = 0x42 COMMA
+ DW_AT_macro_info = 0x43 COMMA
+ DW_AT_namelist_items = 0x44 COMMA
+ DW_AT_priority = 0x45 COMMA
+ DW_AT_segment = 0x46 COMMA
+ DW_AT_specification = 0x47 COMMA
+ DW_AT_static_link = 0x48 COMMA
+ DW_AT_type = 0x49 COMMA
+ DW_AT_use_location = 0x4a COMMA
+ DW_AT_variable_parameter = 0x4b COMMA
+ DW_AT_virtuality = 0x4c COMMA
+ DW_AT_vtable_elem_location = 0x4d COMMA
+ /* DWARF 3 values. */
+ DW_AT_allocated = 0x4e COMMA
+ DW_AT_associated = 0x4f COMMA
+ DW_AT_data_location = 0x50 COMMA
+ DW_AT_stride = 0x51 COMMA
+ DW_AT_entry_pc = 0x52 COMMA
+ DW_AT_use_UTF8 = 0x53 COMMA
+ DW_AT_extension = 0x54 COMMA
+ DW_AT_ranges = 0x55 COMMA
+ DW_AT_trampoline = 0x56 COMMA
+ DW_AT_call_column = 0x57 COMMA
+ DW_AT_call_file = 0x58 COMMA
+ DW_AT_call_line = 0x59 COMMA
+ /* SGI/MIPS extensions. */
+ DW_AT_MIPS_fde = 0x2001 COMMA
+ DW_AT_MIPS_loop_begin = 0x2002 COMMA
+ DW_AT_MIPS_tail_loop_begin = 0x2003 COMMA
+ DW_AT_MIPS_epilog_begin = 0x2004 COMMA
+ DW_AT_MIPS_loop_unroll_factor = 0x2005 COMMA
+ DW_AT_MIPS_software_pipeline_depth = 0x2006 COMMA
+ DW_AT_MIPS_linkage_name = 0x2007 COMMA
+ DW_AT_MIPS_stride = 0x2008 COMMA
+ DW_AT_MIPS_abstract_name = 0x2009 COMMA
+ DW_AT_MIPS_clone_origin = 0x200a COMMA
+ DW_AT_MIPS_has_inlines = 0x200b COMMA
+ /* GNU extensions. */
+ DW_AT_sf_names = 0x2101 COMMA
+ DW_AT_src_info = 0x2102 COMMA
+ DW_AT_mac_info = 0x2103 COMMA
+ DW_AT_src_coords = 0x2104 COMMA
+ DW_AT_body_begin = 0x2105 COMMA
+ DW_AT_body_end = 0x2106 COMMA
+ DW_AT_GNU_vector = 0x2107 COMMA
+ /* VMS extensions. */
+ DW_AT_VMS_rtnbeg_pd_address = 0x2201 COMMA
+ /* UPC extension. */
+ DW_AT_upc_threads_scaled = 0x3210
+IF_NOT_ASM(};)
+
+#define DW_AT_lo_user 0x2000 /* Implementation-defined range start. */
+#define DW_AT_hi_user 0x3ff0 /* Implementation-defined range end. */
+
+/* Location atom names and codes. */
+ENUM(dwarf_location_atom)
+
+ DW_OP_addr = 0x03 COMMA
+ DW_OP_deref = 0x06 COMMA
+ DW_OP_const1u = 0x08 COMMA
+ DW_OP_const1s = 0x09 COMMA
+ DW_OP_const2u = 0x0a COMMA
+ DW_OP_const2s = 0x0b COMMA
+ DW_OP_const4u = 0x0c COMMA
+ DW_OP_const4s = 0x0d COMMA
+ DW_OP_const8u = 0x0e COMMA
+ DW_OP_const8s = 0x0f COMMA
+ DW_OP_constu = 0x10 COMMA
+ DW_OP_consts = 0x11 COMMA
+ DW_OP_dup = 0x12 COMMA
+ DW_OP_drop = 0x13 COMMA
+ DW_OP_over = 0x14 COMMA
+ DW_OP_pick = 0x15 COMMA
+ DW_OP_swap = 0x16 COMMA
+ DW_OP_rot = 0x17 COMMA
+ DW_OP_xderef = 0x18 COMMA
+ DW_OP_abs = 0x19 COMMA
+ DW_OP_and = 0x1a COMMA
+ DW_OP_div = 0x1b COMMA
+ DW_OP_minus = 0x1c COMMA
+ DW_OP_mod = 0x1d COMMA
+ DW_OP_mul = 0x1e COMMA
+ DW_OP_neg = 0x1f COMMA
+ DW_OP_not = 0x20 COMMA
+ DW_OP_or = 0x21 COMMA
+ DW_OP_plus = 0x22 COMMA
+ DW_OP_plus_uconst = 0x23 COMMA
+ DW_OP_shl = 0x24 COMMA
+ DW_OP_shr = 0x25 COMMA
+ DW_OP_shra = 0x26 COMMA
+ DW_OP_xor = 0x27 COMMA
+ DW_OP_bra = 0x28 COMMA
+ DW_OP_eq = 0x29 COMMA
+ DW_OP_ge = 0x2a COMMA
+ DW_OP_gt = 0x2b COMMA
+ DW_OP_le = 0x2c COMMA
+ DW_OP_lt = 0x2d COMMA
+ DW_OP_ne = 0x2e COMMA
+ DW_OP_skip = 0x2f COMMA
+ DW_OP_lit0 = 0x30 COMMA
+ DW_OP_lit1 = 0x31 COMMA
+ DW_OP_lit2 = 0x32 COMMA
+ DW_OP_lit3 = 0x33 COMMA
+ DW_OP_lit4 = 0x34 COMMA
+ DW_OP_lit5 = 0x35 COMMA
+ DW_OP_lit6 = 0x36 COMMA
+ DW_OP_lit7 = 0x37 COMMA
+ DW_OP_lit8 = 0x38 COMMA
+ DW_OP_lit9 = 0x39 COMMA
+ DW_OP_lit10 = 0x3a COMMA
+ DW_OP_lit11 = 0x3b COMMA
+ DW_OP_lit12 = 0x3c COMMA
+ DW_OP_lit13 = 0x3d COMMA
+ DW_OP_lit14 = 0x3e COMMA
+ DW_OP_lit15 = 0x3f COMMA
+ DW_OP_lit16 = 0x40 COMMA
+ DW_OP_lit17 = 0x41 COMMA
+ DW_OP_lit18 = 0x42 COMMA
+ DW_OP_lit19 = 0x43 COMMA
+ DW_OP_lit20 = 0x44 COMMA
+ DW_OP_lit21 = 0x45 COMMA
+ DW_OP_lit22 = 0x46 COMMA
+ DW_OP_lit23 = 0x47 COMMA
+ DW_OP_lit24 = 0x48 COMMA
+ DW_OP_lit25 = 0x49 COMMA
+ DW_OP_lit26 = 0x4a COMMA
+ DW_OP_lit27 = 0x4b COMMA
+ DW_OP_lit28 = 0x4c COMMA
+ DW_OP_lit29 = 0x4d COMMA
+ DW_OP_lit30 = 0x4e COMMA
+ DW_OP_lit31 = 0x4f COMMA
+ DW_OP_reg0 = 0x50 COMMA
+ DW_OP_reg1 = 0x51 COMMA
+ DW_OP_reg2 = 0x52 COMMA
+ DW_OP_reg3 = 0x53 COMMA
+ DW_OP_reg4 = 0x54 COMMA
+ DW_OP_reg5 = 0x55 COMMA
+ DW_OP_reg6 = 0x56 COMMA
+ DW_OP_reg7 = 0x57 COMMA
+ DW_OP_reg8 = 0x58 COMMA
+ DW_OP_reg9 = 0x59 COMMA
+ DW_OP_reg10 = 0x5a COMMA
+ DW_OP_reg11 = 0x5b COMMA
+ DW_OP_reg12 = 0x5c COMMA
+ DW_OP_reg13 = 0x5d COMMA
+ DW_OP_reg14 = 0x5e COMMA
+ DW_OP_reg15 = 0x5f COMMA
+ DW_OP_reg16 = 0x60 COMMA
+ DW_OP_reg17 = 0x61 COMMA
+ DW_OP_reg18 = 0x62 COMMA
+ DW_OP_reg19 = 0x63 COMMA
+ DW_OP_reg20 = 0x64 COMMA
+ DW_OP_reg21 = 0x65 COMMA
+ DW_OP_reg22 = 0x66 COMMA
+ DW_OP_reg23 = 0x67 COMMA
+ DW_OP_reg24 = 0x68 COMMA
+ DW_OP_reg25 = 0x69 COMMA
+ DW_OP_reg26 = 0x6a COMMA
+ DW_OP_reg27 = 0x6b COMMA
+ DW_OP_reg28 = 0x6c COMMA
+ DW_OP_reg29 = 0x6d COMMA
+ DW_OP_reg30 = 0x6e COMMA
+ DW_OP_reg31 = 0x6f COMMA
+ DW_OP_breg0 = 0x70 COMMA
+ DW_OP_breg1 = 0x71 COMMA
+ DW_OP_breg2 = 0x72 COMMA
+ DW_OP_breg3 = 0x73 COMMA
+ DW_OP_breg4 = 0x74 COMMA
+ DW_OP_breg5 = 0x75 COMMA
+ DW_OP_breg6 = 0x76 COMMA
+ DW_OP_breg7 = 0x77 COMMA
+ DW_OP_breg8 = 0x78 COMMA
+ DW_OP_breg9 = 0x79 COMMA
+ DW_OP_breg10 = 0x7a COMMA
+ DW_OP_breg11 = 0x7b COMMA
+ DW_OP_breg12 = 0x7c COMMA
+ DW_OP_breg13 = 0x7d COMMA
+ DW_OP_breg14 = 0x7e COMMA
+ DW_OP_breg15 = 0x7f COMMA
+ DW_OP_breg16 = 0x80 COMMA
+ DW_OP_breg17 = 0x81 COMMA
+ DW_OP_breg18 = 0x82 COMMA
+ DW_OP_breg19 = 0x83 COMMA
+ DW_OP_breg20 = 0x84 COMMA
+ DW_OP_breg21 = 0x85 COMMA
+ DW_OP_breg22 = 0x86 COMMA
+ DW_OP_breg23 = 0x87 COMMA
+ DW_OP_breg24 = 0x88 COMMA
+ DW_OP_breg25 = 0x89 COMMA
+ DW_OP_breg26 = 0x8a COMMA
+ DW_OP_breg27 = 0x8b COMMA
+ DW_OP_breg28 = 0x8c COMMA
+ DW_OP_breg29 = 0x8d COMMA
+ DW_OP_breg30 = 0x8e COMMA
+ DW_OP_breg31 = 0x8f COMMA
+ DW_OP_regx = 0x90 COMMA
+ DW_OP_fbreg = 0x91 COMMA
+ DW_OP_bregx = 0x92 COMMA
+ DW_OP_piece = 0x93 COMMA
+ DW_OP_deref_size = 0x94 COMMA
+ DW_OP_xderef_size = 0x95 COMMA
+ DW_OP_nop = 0x96 COMMA
+ /* DWARF 3 extensions. */
+ DW_OP_push_object_address = 0x97 COMMA
+ DW_OP_call2 = 0x98 COMMA
+ DW_OP_call4 = 0x99 COMMA
+ DW_OP_call_ref = 0x9a COMMA
+ /* GNU extensions. */
+ DW_OP_GNU_push_tls_address = 0xe0
+IF_NOT_ASM(};)
+
+#define DW_OP_lo_user 0xe0 /* Implementation-defined range start. */
+#define DW_OP_hi_user 0xff /* Implementation-defined range end. */
+
+/* Type encodings. */
+ENUM(dwarf_type)
+
+ DW_ATE_void = 0x0 COMMA
+ DW_ATE_address = 0x1 COMMA
+ DW_ATE_boolean = 0x2 COMMA
+ DW_ATE_complex_float = 0x3 COMMA
+ DW_ATE_float = 0x4 COMMA
+ DW_ATE_signed = 0x5 COMMA
+ DW_ATE_signed_char = 0x6 COMMA
+ DW_ATE_unsigned = 0x7 COMMA
+ DW_ATE_unsigned_char = 0x8 COMMA
+ /* DWARF 3. */
+ DW_ATE_imaginary_float = 0x9
+IF_NOT_ASM(};)
+
+#define DW_ATE_lo_user 0x80
+#define DW_ATE_hi_user 0xff
+
+/* Array ordering names and codes. */
+ENUM(dwarf_array_dim_ordering)
+
+ DW_ORD_row_major = 0 COMMA
+ DW_ORD_col_major = 1
+IF_NOT_ASM(};)
+
+/* Access attribute. */
+ENUM(dwarf_access_attribute)
+
+ DW_ACCESS_public = 1 COMMA
+ DW_ACCESS_protected = 2 COMMA
+ DW_ACCESS_private = 3
+IF_NOT_ASM(};)
+
+/* Visibility. */
+ENUM(dwarf_visibility_attribute)
+
+ DW_VIS_local = 1 COMMA
+ DW_VIS_exported = 2 COMMA
+ DW_VIS_qualified = 3
+IF_NOT_ASM(};)
+
+/* Virtuality. */
+ENUM(dwarf_virtuality_attribute)
+
+ DW_VIRTUALITY_none = 0 COMMA
+ DW_VIRTUALITY_virtual = 1 COMMA
+ DW_VIRTUALITY_pure_virtual = 2
+IF_NOT_ASM(};)
+
+/* Case sensitivity. */
+ENUM(dwarf_id_case)
+
+ DW_ID_case_sensitive = 0 COMMA
+ DW_ID_up_case = 1 COMMA
+ DW_ID_down_case = 2 COMMA
+ DW_ID_case_insensitive = 3
+IF_NOT_ASM(};)
+
+/* Calling convention. */
+ENUM(dwarf_calling_convention)
+
+ DW_CC_normal = 0x1 COMMA
+ DW_CC_program = 0x2 COMMA
+ DW_CC_nocall = 0x3
+IF_NOT_ASM(};)
+
+#define DW_CC_lo_user 0x40
+#define DW_CC_hi_user 0xff
+
+/* Inline attribute. */
+ENUM(dwarf_inline_attribute)
+
+ DW_INL_not_inlined = 0 COMMA
+ DW_INL_inlined = 1 COMMA
+ DW_INL_declared_not_inlined = 2 COMMA
+ DW_INL_declared_inlined = 3
+IF_NOT_ASM(};)
+
+/* Discriminant lists. */
+ENUM(dwarf_discrim_list)
+
+ DW_DSC_label = 0 COMMA
+ DW_DSC_range = 1
+IF_NOT_ASM(};)
+
+/* Line number opcodes. */
+ENUM(dwarf_line_number_ops)
+
+ DW_LNS_extended_op = 0 COMMA
+ DW_LNS_copy = 1 COMMA
+ DW_LNS_advance_pc = 2 COMMA
+ DW_LNS_advance_line = 3 COMMA
+ DW_LNS_set_file = 4 COMMA
+ DW_LNS_set_column = 5 COMMA
+ DW_LNS_negate_stmt = 6 COMMA
+ DW_LNS_set_basic_block = 7 COMMA
+ DW_LNS_const_add_pc = 8 COMMA
+ DW_LNS_fixed_advance_pc = 9 COMMA
+ /* DWARF 3. */
+ DW_LNS_set_prologue_end = 10 COMMA
+ DW_LNS_set_epilogue_begin = 11 COMMA
+ DW_LNS_set_isa = 12
+IF_NOT_ASM(};)
+
+/* Line number extended opcodes. */
+ENUM(dwarf_line_number_x_ops)
+
+ DW_LNE_end_sequence = 1 COMMA
+ DW_LNE_set_address = 2 COMMA
+ DW_LNE_define_file = 3
+IF_NOT_ASM(};)
+
+/* Call frame information. */
+ENUM(dwarf_call_frame_info)
+
+ DW_CFA_advance_loc = 0x40 COMMA
+ DW_CFA_offset = 0x80 COMMA
+ DW_CFA_restore = 0xc0 COMMA
+ DW_CFA_nop = 0x00 COMMA
+ DW_CFA_set_loc = 0x01 COMMA
+ DW_CFA_advance_loc1 = 0x02 COMMA
+ DW_CFA_advance_loc2 = 0x03 COMMA
+ DW_CFA_advance_loc4 = 0x04 COMMA
+ DW_CFA_offset_extended = 0x05 COMMA
+ DW_CFA_restore_extended = 0x06 COMMA
+ DW_CFA_undefined = 0x07 COMMA
+ DW_CFA_same_value = 0x08 COMMA
+ DW_CFA_register = 0x09 COMMA
+ DW_CFA_remember_state = 0x0a COMMA
+ DW_CFA_restore_state = 0x0b COMMA
+ DW_CFA_def_cfa = 0x0c COMMA
+ DW_CFA_def_cfa_register = 0x0d COMMA
+ DW_CFA_def_cfa_offset = 0x0e COMMA
+
+ /* DWARF 3. */
+ DW_CFA_def_cfa_expression = 0x0f COMMA
+ DW_CFA_expression = 0x10 COMMA
+ DW_CFA_offset_extended_sf = 0x11 COMMA
+ DW_CFA_def_cfa_sf = 0x12 COMMA
+ DW_CFA_def_cfa_offset_sf = 0x13 COMMA
+
+ /* SGI/MIPS specific. */
+ DW_CFA_MIPS_advance_loc8 = 0x1d COMMA
+
+ /* GNU extensions. */
+ DW_CFA_GNU_window_save = 0x2d COMMA
+ DW_CFA_GNU_args_size = 0x2e COMMA
+ DW_CFA_GNU_negative_offset_extended = 0x2f
+IF_NOT_ASM(};)
+
+#define DW_CIE_ID 0xffffffff
+#define DW_CIE_VERSION 1
+
+#define DW_CFA_extended 0
+#define DW_CFA_lo_user 0x1c
+#define DW_CFA_hi_user 0x3f
+
+#define DW_CHILDREN_no 0x00
+#define DW_CHILDREN_yes 0x01
+
+#define DW_ADDR_none 0
+
+/* Source language names and codes. */
+ENUM(dwarf_source_language)
+
+ DW_LANG_C89 = 0x0001 COMMA
+ DW_LANG_C = 0x0002 COMMA
+ DW_LANG_Ada83 = 0x0003 COMMA
+ DW_LANG_C_plus_plus = 0x0004 COMMA
+ DW_LANG_Cobol74 = 0x0005 COMMA
+ DW_LANG_Cobol85 = 0x0006 COMMA
+ DW_LANG_Fortran77 = 0x0007 COMMA
+ DW_LANG_Fortran90 = 0x0008 COMMA
+ DW_LANG_Pascal83 = 0x0009 COMMA
+ DW_LANG_Modula2 = 0x000a COMMA
+ DW_LANG_Java = 0x000b COMMA
+ /* DWARF 3. */
+ DW_LANG_C99 = 0x000c COMMA
+ DW_LANG_Ada95 = 0x000d COMMA
+ DW_LANG_Fortran95 = 0x000e COMMA
+ /* MIPS. */
+ DW_LANG_Mips_Assembler = 0x8001 COMMA
+ /* UPC. */
+ DW_LANG_Upc = 0x8765
+IF_NOT_ASM(};)
+
+#define DW_LANG_lo_user 0x8000 /* Implementation-defined range start. */
+#define DW_LANG_hi_user 0xffff /* Implementation-defined range start. */
+
+/* Names and codes for macro information. */
+ENUM(dwarf_macinfo_record_type)
+
+ DW_MACINFO_define = 1 COMMA
+ DW_MACINFO_undef = 2 COMMA
+ DW_MACINFO_start_file = 3 COMMA
+ DW_MACINFO_end_file = 4 COMMA
+ DW_MACINFO_vendor_ext = 255
+IF_NOT_ASM(};)
+
+/* @@@ For use with GNU frame unwind information. */
+
+#define DW_EH_PE_absptr 0x00
+#define DW_EH_PE_omit 0xff
+
+#define DW_EH_PE_uleb128 0x01
+#define DW_EH_PE_udata2 0x02
+#define DW_EH_PE_udata4 0x03
+#define DW_EH_PE_udata8 0x04
+#define DW_EH_PE_sleb128 0x09
+#define DW_EH_PE_sdata2 0x0A
+#define DW_EH_PE_sdata4 0x0B
+#define DW_EH_PE_sdata8 0x0C
+#define DW_EH_PE_signed 0x08
+
+#define DW_EH_PE_pcrel 0x10
+#define DW_EH_PE_textrel 0x20
+#define DW_EH_PE_datarel 0x30
+#define DW_EH_PE_funcrel 0x40
+#define DW_EH_PE_aligned 0x50
+
+#define DW_EH_PE_indirect 0x80
+
+#endif /* _ELF_DWARF2_H */